Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Automatic Door Openers

Falcon Automatic Door Openers
Back To Main Catagories

Camden

Key Switches & Handicap Pushbuttons

Automatic Door Openers-Camden-Key Switches and Handicap Pushbuttons

KEY SWITCHES
- Accepts standard mortise cylinders 1”, 1-1/8” & 1-1/4” (cylinder sold separately).
- Weather resistant heavy duty 1/4” thick aluminum one piece die cast construction.
- Locators prevent cylinder from spinning.
- Vandal resistant.
- Provides 1 or 2 switch configurations & left/right operation.
- Colour coded 18 AWG soldered leads.
- UL/CSA approved switches: Single throw momentary normally open switch supplied rated for 4 amps @ 24VDC.
Applications
- Indoor & outdoor, electronic locks, electromagnetic locks, electric strikes, monitors, shunting, bypassing, timed functions, activating/deactivating CCTV, access control equipment & other applications.
CM 1000
- Size: 4-1/2”H x 2-3/4”W x 2”D
- Wall, pipe or pedestal, weather resistant surface mount
- Includes a weather resistant utility box with a 1/2” threaded opening and close-up, heavy duty rubber gasket, brass cylinder lock ring, 4 socket/slotted screws, and 2 tamper proof screws and security driver.
CM 2000
- Size: 4-1/2”H x 1-3/4”W x 1-1/2”D
- Only 1-3/4” wide flush mount switch, perfect for door frame or narrow areas.
- Includes a brass lock ring, 2 socket/slotted screws, 2 tamper proof screws and security driver.
Description:
- Surface Mount Switch Box
- Narrow Stile Switch
- Replacement Switch for CM1000 & CM2000

HANDICAP OPERATOR PUSHBUTTON SWITCHES
- Durable stainless steel construction with tamper resistant fastening on all active units. UL61058-1, IEC 61058-2-4 and CAN/CSA-C22.2 compliant.
Application:
CM25 2, CM250 2: Mounts in aluminum jamb or in surface boxes
CM45 2: Mounts in a single or double gang box
CM60 2: Mounts in a single or double gang, and 4” x 4” box (with included adapter plate).
CM280 2: Mounts in a single gang box
Actuation
CM25 2, CM45 2, CM60 2: All-active design requires minimal actuation force & meets handicap requirements as well as withstanding high traffic.
CM250 2, CM280 2: 1” red button requires minimal actuation force and meets handicap requirements.
Switch Specification
CM25 2: UL/CSA approved SPST N.O. switch rated 3 amps @ 120VAC
CM250 2, CM280 2, CM45 2, CM60 2: UL/CSA approved SPDT N.O. switch rated 15Amp @ 125VAC.
Type - Size
- All Active - 1-5/8”W x 4-1/2”H
- Standard - 1-5/8”W x 4-1/2”H
- Standard - 2-3/4”W x 4-1/2”H
- All Active - 4-1/2” W x 4-1/2”H
- All Active - 6” Diameter


Falcon

Automatic Operator - 8200 Series

Automatic Door Openers-Falcon-Automatic Operator-8200Series

8200 SERIES AUTOMATIC OPERATOR
- Push Arm door operator with Pull Arm capability (Pull Arm option requires Pull Arm Kit).
- Versatile and easily integrated into electrified openings with wireless accessories: Call us for details.
- Designed to fit in low to moderate traffic applications, such as assisted living, ambulatory care, hospitality, retail, restaurant and small office where ease of use is critical.
- Slim & sleek profile has a smaller footprint for clean lines and an attractive look.
- Ensures smooth, convenient door opening for areas requiring easy accessible and ADA compliance.
- Provides dependable performance at an affordable price point.
- Aluminum powder coated steel cover.
- Steel aluminum finished cover makes the 8200 Series aesthetically pleasing for any application.
- Mounting bracket contains fastening notches to reduce parts and allow for faster and easier installation.
- One-piece mounting bracket eliminates the need for end caps, reducing parts and installation time.
- Non-handed motor gearbox uses mechanical controls to act as a size 3 door closer in manual operation.
- Intelligent control box provides the most precise door operation and includes adjustable features for all commercial applications.

Standard Features That You Can Use To Customize Every Opening:
- Smart Latch: Senses and overcomes external pressure conditions with a graduated energy assist for secure latching.
- Push’n’Go: Selectable feature allows door to open automatically as soon as it feels pressure.
- Open Position Learning: Automatically sets the opening position to eliminate wall and door damage.
- Obstacle Obstruction Detection: Safety feature stops and reverses door direction when distress or an obstruction is sensed.
- Pre-Load Strike Assist: Removes load on strike lip with a one second delay allowing the door to release and automatically open.
- LED Light Illumination: Light illumination on control box signals accurate installation and helps with connection diagnostics.
- On Board Power Supply (12 VAC): Powers accessories and actuators, power supply may be required for a separate locking device.

Adjustable Features:
- Hold-open time delay; 0-15 seconds.
- Backcheck position.
- Backcheck speed.
- Opening/closing speed.

Specifications:
- Electro-hydraulic single door operation.
- Surface top jamb mount.
- Header length: 26”.
- Reduced force.
- Low energy.
- Cycle tested - 1 million gear box.
- Electric strike replay included.
- Non-handed.
- Max door weight: 200 pounds.
- Stocked with Push Arm.
Description:
- Push Arm Door Operator w/ Pull Arm Capability.
Options
- Replacement Push Arm
- Pull Arm Kit (Pull Arm with Track


LCN

Auto Equilizer Pneumatic & Benchmark Low Energy Operators

Automatic Door Openers-LCN-Auto Equalizer Pneumatic and Benchmark Low Energy Operators

4822 SERIES AUTO EQUALIZER™ PNEUMATIC OPERATOR
- This low energy automatic operator provides easy access for people with disabilities, the elderly, or the frail.
- Designed primarily for manual opening applications that occasionally require automatic opening.
- Size 2 push side pneumatic auto equalizer.
- Packed with thru bolts, wood & machine screws.
- Ideal for multi-door applications since cost per door leaf decrease significantly as the number of door leaves increases.
- Utilizes a 10,000,000 cycle heavy duty door closer.
- Quiet, efficient & reliable.
- Requires control boxes with integral compressor or control box using auxiliary air supply.
- No guard rails/safety mats required.
- Meets ADA requirements (power mode).
- Non-sized cylinders for interior doors to 4’6” and exterior doors to 3’6”.
- Non-handed.
- UL listed 228 and meets the provisions of ANSI Standards A117.1, A156.19, and the Americans with Disabilities Act.
- Reveal of 4-1/2” allows up to 90° power opening and 100° manual opening.
- Head frame minimum: 1-3/4”.
- Top rail minimum: 1-3/4”.
Operator - Type - Finish
- Push - Side - Aluminum

9130 SERIES BENCHMARK LOW ENERGY OPERATOR
- Non-handed for either right or left swinging door.
- Designed primarily for automatic opening applications that occasionally require manual opening.
- Operator is shipped with motor gearbox, control box, mounting plate, standard arm, metal cover, standard track, wood and machine screws.
- On/Off switch included as standard.
- 36” cover is standard.
- Fits doors 30” to 36” width.
- All potentiometers clearly labeled with their functions.
- LED lights indicate power to control box and motor gearbox.
- Push-‘n-go permits non-switch activation.
- Tested internally to over 3,000,000 cycles.
- Power Boost allows for increased closing force near latch position.
- 9-3/4” for optional long arm; reveal should not exceed 1/8” on pull installations.
- Head frame minimum 2”.
- Top rail minimum 2” - flush ceiling installation requires 5-1/4” minimum.
- Opening and closing time are variable by adjustments to the electronic control module located on the operator assembly - maximum hold open time adjustable up to approximately 30 seconds.
- Template allows 90° power opening and 90° manual opening.
Operator - Type - Finish
- Pull - Side - Aluminum