Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Commercial Handles

LSDA Commercial Door Handle
Back To Main Catagories

LSDA

Mortise Locks

MLF SERIES MORTISE LOCKS
- LSDA mortise locks provide exceptional strength and durability to any door.
- Typically used in hospitals, schools and commercial buildings, they are well-suited to heavy use environments. Designed to fit standard Type 86 full-mortise cutouts, and equipped with an escutcheon trim, these locks are excellent for new projects and retrofit. The lever trim meets ADA standards for accessibility. Several functions are available, some with integral deadbolt. Mortise locks offer functions that cannot be obtained using cylindrical “key-in-knob” locksets.
- ANSI/BHMA: A156.13 2005 Series 1000, Grade 1.
- UL10C; UBC 7-2-1997.
- Heavy-duty full-case mortise lock.
- Oversize escutcheons, ideal for retrofit.
- Individual lever return springs prevent sagging.
- UL listed for 3-Hour fire doors.
- Supplied with SC4 1-1/4” mortise cylinder.
- Cylinders used for this mortise lock must be 1-1/4” length mortise cylinder.
- Deadbolt: 1” bolt projection.
- Latch: 3/4” projection.
- Supplied with a mortise cylinder except passage and privacy functions locks.
- Door thickness: 1-3/4”.
- Door preparation: Full mortise, see template.
- Escutcheons: 2-1/2” W x 8-1/4” H.
- “Quick Change” Handing: Field reversible.
- Strike: 4-7/8” x 1-1/4”.
- Backset: 2-3/4”.
- Construction: Forged brass levers and escutcheons, zinc chromate steel case, brass latchbolts.
- Style: Ann Arbor.
- Finish: Satin Chrome.

MLF01 - Passage:
- Latch retracted by lever on either side.
MLF04 - Entrance:
- Lock or unlock outside lever using rocker on edge of lock. When locked, inside lever retracts latch, outside access by key.
MLF05 - Classroom:
- Lock or unlock outside lever by key on outside of the door. When locked, inside lever retracts latch.
MLF07 - Storeroom:
- Inside lever always retracts latch. Outside lever never retracts latch, outside key retracts latch.
MLF12 - Apartment/Dormitory/Exit With Rocker:
- Latch is retracted by either lever unless outside lever is locked by rocker. In addition, a deadbolt can be projected or retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt, while outside lever remains locked.
MLF13 - Apartment/Dormitory/Exit Without Rocker:
- Both levers always retract latch. Deadbolt can be projected and retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt.
MLF19 - Privacy:
- Both levers always retract latch. Deadbolt can be projected and retracted by thumbturn inside or emergency release outside. Also, operating inside lever retracts latch and deadbolt.
MLF48 - Storeroom with Deadbolt:
- Inside lever always retracts latch, and deadbolt if it is extended. Outside lever is rigid, outside cylinder retracts latch, and deadbolt if it is extended. Deadbolt is extended or retracted by inside thumbturn or by outside cylinder.

Functions:
Passage - Entrance - Classroom - Storeroom - Apartment/Domitory/Exit Lock with Rocker - Apartment/Domitory/Exit Lock No Rocker - Privacy - Storeroom with Deadbolt.

Accessories:
- Spindle Kit for MLF Mortise Locks.
- Spring Cage for MLF Mortise Locks.


LSDA

Grade 1 Extra Heavy Duty Leverset

LF SERIES LEVERSETS
- ANSI/BHMA A156.2 series 4000, Grade 1 certified.
- Latch: Solid brass 1/2” throw, reversible for RH or LH applications.
- UL/cUL listed for fire rated openings.
- Roses are wrought brass or bronze.
- Backset: 2-3/4”, 2-3/8” available.
- Faceplate adjustable for flat or beveled doors 2-1/4" x 1-1/8".
- Door: Adjustable from 1-3/8” to 2”.
- Strike: 4-7/8" x 1-1/8" ASA.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Case: Corrosion treated heavy gauge, cold-rolled, steel mechanisms.
- Rose: 3-1/2” diameter.
- Lever length: 5-1/4” long.
IC Core Option:
Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best. Core not included.

LF2000 – Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts latch.
LF2100 – Passage:
- Both levers always retract latch.
LF2200 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts latch.
LF2400 – Storeroom:
- Outside lever never retracts latch. Entrance by key only. Inside lever always retracts latch.
LF2500 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder.
- The inside lever always retracts the latch.
LF2800 – Classroom Intruder:
- Outside and inside cylinders lock outside lever. Inside lever always retracts the latch.
LF2900 – Institutional:
- Neither lever retracts the latch. A key is required in both the inside and outside cylinder to retract the latch.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

Functions:
Entrance - Privacy - Passage - Storeroom - Classroom - Classroom Intruder - Institutional.


LSDA

Grade 1 Heavy Duty Leversets

5000 SERIES LEVERSETS
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- Vandal resistant clutch models available.
- Non-handed.
- Latchbolt: 2-3/4” backset, UL listed 3 hr fire rated.
- Door thickness: 1-9/16” to 2-1/8”.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
5000 - Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
C5000 – Entrance/Office with Clutch:
- Same operation as 5000.
5100 – Passage:
- Both levers always retract the latch.
5200 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
5400 – Storeroom:
- Outside lever never retracts the latch. Entrance by key only. Inside
- lever always retracts the latch.
C5400 – Storeroom with Clutch:
- Same operation as 5400.
5500 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.

Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

IC Core Option:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).

Functions:
Entrance - Passage - Privacy - Storeroom - Classroom


LSDA

Grade 1 Heavy Duty Knobsets

4000 SERIES KNOBSETS
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- UL listed 3 hour fire rated, 10C/UBC 7-2 positive pressure.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Latchbolt: 2-3/4 backset, UL listed, 2-3/8” UL listed latch available.
- Door thickness: 1-3/8” to 2”.
- Non-handed.
4000 – Entrance/Office:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.
4100 – Passage:
- Both knobs always retract the latch.
4200 – Privacy:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.
4400 – Storeroom:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.
4500 – Classroom:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.

IC Core Option:
- Accepts small format IC Cores from KSP, Kaba
- Peaks, Falcon & Best (Core not included).

Functions:
Entrance - Privacy - Passage - Storeroom - Classroom - Institutional


LSDA

Grade 1 & Grade 2 Latches & Accessories

GRADE 1 LATCHES & ACCESSORIES
5LINK
- Use in conjunction with a 2-3/4” latch to achieve 5” backset.
LFTDP
- Includes outside rose, rose liner & inside rose to adapt a LF series lever for a 2-1/4” door.
Deadlatch
- UL 2-3/4” 3.
- UL 2-3/4” 32D.
- UL 2-3/8” 26D.
Spring Latch
- UL 2-3/4” 32D.
Extension Latch
- 5”.
IC Replacement Yokes
- All Except LFC2000IC.
LFC2000IC
- Thick Door Package for LF Series.

GRADE 2 LATCHES, EXTENSION LINK & CYLINDER
KEL5
- Use in conjunction with 2-3/4” latch to achieve 5” backset. Dead Latches
- Drive-In 2-3/8” 32D.
- Drive-In 2-3/4" 32D.
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 3.
- UL 2-3/4" 32D.
Spring Latches
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 32D.
Extension Link
- 5”.
Cylinder
- SC1 26D.


LSDA

Grade 2 Commercial Duty Leversets

800 SERIES “VANCOUVER” LEVERSETS
- ANSI/BHMA A156.2-2003, series 4000 Grade certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Vancouver design: Two-step rose.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.
800 – Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
C800 - Entrance/Office with Clutch:
- Same operation as 800.
810 – Passage:
- Both levers always retract the latch.
820 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
830 - Exit:
- Lever inside, always retracts latch. Blank plate outside.
840 – Storeroom:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.
C840 - Storeroom with Clutch:
- Same operation as 840.
850 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.
C850 - Classroom with Clutch:
- Same operation as 850
870 - Communicating:
- Key in either lever locks or unlocks that lever.
890 - Institutional:
- Both levers always rigid. Key in either lever retracts latch.
IC Core Option:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).
Functions:
Entrance - Privacy - Passage - Exit - Storeroom - Classroom - Communicating - Institutional.


LSDA

Grade 2 Commercial Duty Leversets 800 Series

800 SERIES “EDMONTON” & “CALGARY” LEVERSETS
- ANSI/BHMA A156.2-2003, series 4000 Grade 2 certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Edmonton design: Flat-face rose.
- Calgary design: Flat-face rose with curved lever.
C800 - Entrance/Office with Clutch:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
810 – Passage:
- Both levers always retract the latch.
820 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
C840 - Storeroom with Clutch:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.
C850 – Classroom with Clutch:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.

Functions:
Edmonton Style: Entrance - Passage - Privacy - Storeroom.
Calgary Style: Entrance - Passage - Privacy - Storeroom - Classroom.


LSDA

Grade 2 Commercial Duty Knobsets 100B Series

100B SERIES KNOBSETS
- ANSI/BHMA A156.2 series 4000, Grade 2 certified.
- UL/cUL listed for fire rated openings.
- Cylindrical lock housing made of cold rolled steel mechanisms, zinc dichromated for corrosion resistance.
- Strike: 4-7/8”x 1-1/4”.
- Door: Adjustable from 1-3/8” to 1-3/4”.
- Backset: 2-3/4”, 2-3/8” available.
- Cylinder: Supplied with rekeyable SC4 6 pin keyway standard, IC Core option accepts 6 or 7 pin Best® style cores, *WR5 rekeyable 6 pin , keyed 5 pin, accepts pins up to WR size 7.
- *WR5 - For master key system, please purchase locks less cylinder and add Ilco 15995WE26D OB cylinder.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
100 – Entrance/Office:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.
110 – Passage:
- Both knobs always retract the latch.
120 – Privacy:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.
130 - Exit Lock:
- Knob Inside, blank plate outside.
140 – Storeroom:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.
150 – Classroom:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.
190 - Institutional:
- Both levers fixed. Entrance by key in either side.


Sargent

Heavy Duty Levers & Knobs

10 LINE HEAVY DUTY LEVERS
- Cycle test: Exceeds 5 times A156.2 Grade 1 requirements.
- Abusive locked lever torque without entry gained: exceeds 1.5 times A156.2 Grade 1.
- For doors 1-3/4” to 2”.
- Non-handed.
- Cylindrical housing steel, zinc dichromate finish.
- Levers: Solid cast.
- Roses: Heavy wrought brass, bronze.
- Multiple thru-bolt positions.
- Latchbolt stainless steel 1/2” throw.
71 Electromechanical (Fail Secure)
- Power off, locks outside lever, inside lever always allows egress.
- Deadlocking latch; key retracts latch.
- Voltage requirements: 24VDC; 250mA at 24VDC.
- Provided with ElectroLynx® 8-Pin Connector.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Classroom:
- Latch by either lever unless outside lever is locked by key. Key in outside lever locks or unlocks outside lever and retracts latch. Inside lever always operative.
Passage:
- Latchbolt by either lever.
Functions:
Storeroom - Entrance - Classroom - Storeroom - Passage - Privacy.

8 LINE HEAVY DUTY KNOBS
- Heavy duty T-Zone construction with interlocking latch and aligning tubes.
- ANSI A156.2 series 4000 Grade 1.
- 1-3/8” thick door adjustable to 1-3/4”.
- Accurate alignment, smooth operation and reversibility of the lock without disassembly of knob and cylinder.
- Latch: Seamless brass tube with stainless steel springs for longer life.
- ANSI A-115.2 strike – 1-1/4” lip standard.
Entrance:
- Key outside or knob inside always retracts latchbolt, buttom inside can be pushed-in & turned only; locks outside knob until released manually.
Function: Entrance.


Sargent

7 Line & 6500 Line Medium Duty Levers

7 LINE MEDIUM DUTY LEVERS
- Exceeds 2-1/2 times ANSI/BHMA A156.2 Grade 2 cycle requirements.
- Non-handed.
- Solid feel and precise lever action.
- For doors 1-3/8” to 1-3/4”.
- Cylindrical housing steel, zinc dichromate finish.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Function:
Storeroom - Entrance - Classroom - Passage - Privacy.

6500 LINE MEDIUM DUTY LEVERS
- Meets ANSI/BHMA A156.2 Grade 2 cycle requirements.
- Non-handed.
- For doors 1-3/8” to 1-3/4”.
- Cylindrical housing steel, zinc dichromate finish.
- Wrought rose, cast lever.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Passage:
- Latchbolt by either lever.
Privacy:
- Latch retracted by either lever unless outside lever is locked by push button in inside lever.
Functions:
- Storeroom - Entrance - Passage - Privacy.


Sargent

6 Line Knobs, 8200 Series Mortise Levers & Accessories

6 LINE MEDIUM DUTY KNOBS
- Fits doors from 1-3/8” to 1-3/4” thick.
- Certified ANSI A156.2 series 4000 Grade 2.
- OB knob design.
- Knob & rose: Wrought brass/bronze.
Function:
- Storeroom - Entrance.

8200 SERIES MORTISE LEVERS
- For doors 1-3⁄4” thick.
- 2-3/4” backset.
- Case 12 gauge heavy duty wrought steel, zinc dichromate plated.
- Case thickness: 7/64”, 12 gauge heavy duty wrought steel, zinc dichromate plated.
- Outside front plate: 8” x 1-1⁄4”.
- Latchbolt: Stainless steel 3⁄4” projection one-piece, anti-friction reversible latch.
- Hand: Easily field reversible.
- Certified to and exceeds ANSI A156.13, series 1000, operational Grade 1 and security. Grade 1 with all standard trims.
BP8205:
- Body only.
8271 24VDC:
- Solenoid activated mortise lock.
- Power to the solenoid, locks outside lever.
- Key outside retracts latchbolt except when lever outside is locked. Lever outside can only be locked with the solenoid. Lever inside always retracts latchbolt.
- Auxiliary deadlatch.
- 24VDC.
LCRX8271 24VDC:
- Request to enter/exit signaling switch - monitors inside lever rotation.
Function:
Storeroom - Entrance Less Cylinder LNL Right - Passage — LNL Right - Classroom Less Cylinder LNJ Left - Privacy — LNL Right - Entrance Less Cylinder.
Electromechanical, Fail Secure Lock, 24VDC
- Storeroom Less Cylinder LNL Right.
Spindle Kit:
- 1-3/4” Spindle Old 8100.
- 1-3/4” Spindle New 8100.


Sargent

Mortise & Cylindrical Deadbolts

4870 MORTISE DEADBOLTS
- Bolt: One piece hardened stainless steel deadbolt with 1” throw.
- Door thickness: 1-3/4”.
- Front: 4-5/8” x 1-1/8”.
- Non-handed.
Single Deadbolt:
- Key outside operates deadbolt. Thumb turn inside operates deadbolt.
Classroom Function:
- Key outside operates deadbolt. Thumb turn inside retracts deadbolt, but will not project it.
Function:
- Single Deadbolt - Classroom.

460 & 480 SERIES CYLINDRICAL DEADBOLTS
- For doors 1-3/8” to 1-3/4” thick only.
- Backset: 2-3/4”.
Single Deadbolt
- Key outside operates deadbolt. Thumb turn inside operates deadbolt.
460 Series
- Bolt: solid brass 5/8” x 13/16” x 1” throw with hardened steel pin.
- Cylinder housing: Steel reinforced and plated.
480 Series
- Bolt: solid steel with hardened steel pin insert and nickel silver plating 7/8” x 5/8” x 1” throw.
- Cylinder housing: Non-ferrous, reinforced, one piece 2-1/2” 16 2153 32D.
- Bolt for 480 series.


Sargent

Keypad Locksets, 90 Series Exit Device & Trim

KEYPAD LOCKSETS
- Keypad made of ultraviolet stable textured material.
- Operating temperature for keypad: 4°F to 140°F.
- Adjustable unlock time.
- Over 1,100,000 possible user combinations.
- 100 user codes.
- Operates utilizing any one to six digits per code - digits may be repeated or start with “0”.
- “One time” user codes allow visitors “one time” entry.
- Entry of three wrong user codes in succession disables all codes for ten seconds.
- Unit can be put in “passage only” mode at keypad.
- One master code - assigns emergency, supervisory and user codes.
- Meets ANSI A156.2 Grade 1 requirements.
- Operates with 4 “C” alkaline batteries (included).
- Key override on both models.
- External battery input connector on under side of keypad in case of battery failure.
- Typical 40,000 operations per set of batteries.
- For 1-3/4” thick doors.
- Infrared link to optional printer (52-2069) shows last fifteen transactions.
Types:
- Cylindrical Latch.
- Mortise Latch.

90 SERIES RIM EXIT DEVICES & TRIM
- Maximum 4-1/2 inch (114mm) projection, minimum 2-3/4 inch (70mm) dogged.
- Stainless steel springs throughout.
- ANSI A156.3 Grade 1.
- UL Listed.
- UL Listed to Canadian safety standards.
- Double doors require astragal.
- For doors: Wood or metal; 1-3/4” thick standard, 4-1/8” minimum stile.
- Mounting: Supplied standard with wood and machine screws.
- Chassis cover: Brass, bronze or stainless steel.
- Chassis: Nonferrous alloy.
- Crossbar: 1” brass, bronze and stainless steel tubing.
- Cross bars can easily be cut to length in the field.
- Trim is through-bolted.
- Hand: Non-handed.
- Dogging: Standard Allen key dogging.
- Strike: 649 standard.
98 T PTB
- Pull is through bolted to the exit device through the chassis which allows for perfect alignment of the thumb piece and cylinder.
- Key outside unlocks/ locks thumb piece.
- Rim cylinder supplied.
- Reversible Rim Exit Device.
- Trim.


Schlage

Heavy Duty ND Series Levers

ND SERIES HEAVY DUTY LEVERS
- Meet handicap accessibility codes.
- All ND series lever locksets are non-handed.
- Independent heavy duty spring cages for effective lever support.
- Thru-bolted mechanism for positive interlock to door.
- Exceeds ANSI A156.2 series 4000 Grade 1.
- Free-wheeling lever eliminates the ability to stand or exert excessive force on the end of the lever to resist vandalism.
- Backset: 2-3/4”.
Passage Latch
- Both levers always unlocked.
Bath/Bedroom Privacy Lock
- Pushbutton locking. It can be opened from outside with a small screwdriver. Turn inside lever or close door to release button.
Entrance/Office Lock
- Pushbutton locking. Pushbutton locks outside lever until it is unlocked with key or by turning inside lever.
Entrance Lock
- Turn/pushbutton locking: Pushing and turning the button locks the outside lever requiring use of a key until the button is manually unlocked. Pushbutton locking: pushing button locks outside lever until unlocked by key or by turning the inside lever.
Classroom Outside lever locked and unlocked by key. Inside lever always unlocked.
Storeroom
- Outside lever is fized. Entrance by key only. Inside lever always unlocked.
Electrically Unlocked (Fail Secure)
- Outside lever continuously locked until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate exit.
Function:
Bath/Bedroom Privacy Lock - Entrance/Office - Entrance - Electronically Unlocked Storeroom.


Schlage

Extra Heavy Duty D Series Knobs, Latches & Extention

D SERIES EXTRA HEAVY DUTY KNOBS
- Heavy duty commercial and institutional applications.
- Concealed mounting screws.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Door thickness: 1-3/8" to 2".
- ANSI A156.2 Series 4000 Grade 1, UL listed.
- Backset: 2-3/4" standard.
- Latch: 1/2" throw steel latch bolt with 1" housing.
- All stock in satin chrome finish and orbit design.
Passage Latch
- Both knobs always unlocked.
Privacy
- Pushbutton locking. Can be opened from outside with small screwdriver. Turning inside knob or closing door releases button. Inside knob is always free for immediate egress.
Entrance
- Pushing button locks outside knob until unlocked by key or by turning inside knob. Pushing and turning button locks outside knob requiring use of key untill button is manually unlocked. Inside knob is always free for immediate egress.
Classroom
- Outside knob locked and unlocked by key. Inside knob is always free for immediate egress.
Storeroom
- Outside knob fixed. Entrance by key only. Inside knob is always free for immediate egress.
Electrically Unlocked (Fail Secure)
- Auxiliary latch deadlocks latchbolt when door is closed. Outside knob continuously locked until unlocked by key or electric current. Inside knob is always free for immediate egress.
Functions:
Passage - Privacy - Entrance - Classroom - Storeroom - Electrically Unlocked (Fail Secure).

D SERIES EXTRA HEAVY DUTY KNOBS
43 005
- Extension link when used with a 2-3/4” latch creates a 5” backset latch.


Schlage

Grade 2 AL Series Levers

AL SERIES GRADE 2 LEVERS
- True thru-bolting of door prevents lock chassis rotation and disengagement from latch.
- Stainless steel interlocking spindle design.
- Cold rolled steel, machined, threaded hubs and locking nuts prevent loosening of the lockset.
- Heavy duty cast mounting plate with specially tapped holes reduces loosening of through-bolting and lockset on the door.
- Heavy duty compression springs extend life of spring cage.
- Large diameter of mounting plate and rose provides coverage for new ANSI hollow metal door cutout.
- Solid brass pin tumbler cylinder with nickel silver keys for less wear and longer cycle life.
- Door thickness: 1-3/8” to 1-7/8”.
- Backset: 2-3/4”.
- Keying: Stock in KD standard, 6 pin cylinder keyed to 5.
- Non-handed.
- ANSI A156.2, 1989, series 4000 G2.
- UL listed for all functions up to 3-hour doors.
- ADA compliant.
- All stock in satin chrome.
Passage
- Both levers always unlocked.
Exit
- Blank plate outside. Inside lever always unlocked. Inside lever always free for immediate egress.
Privacy
- Push button locking. Can be opened from outside with small screwdriver. Turning inside lever or closing door releases button.
Entrance/Office
- Push-button locking. Push-button locks outside lever until unlocked with key or by rotating inside lever.
Entrance
- Turn/push-button locking; pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turning inside lever.
Classroom
- Outside lever locked and unlocked by key. Inside lever always unlocked.
Storeroom
- Outside lever always fixed. Entrance by key only. Inside lever always free for exit.
Function:
Passage - Exit - Privacy - Entrance/Office - Entrance - Classroom - Storeroom.


Schlage

Grade 2 A Series Knobs, Latches & Extension

A SERIES GRADE 2 KNOBS
- Heavy duty residential medium duty commercial.
- ANSI A156.2 series 4000 Grade 2, UL listed.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Door thickness: 1-3/8” to 1-7/8” standard.
- Backset: 2-3/4”, 2-3/8” available.
- Latch: 1/2” throw deadlatch: 3/8” throw springlatch.
- Strike: T-strike 1-1/8˝ x 2-3/4˝.
- All stock in satin chrome.
Passage
- Both knobs always unlocked.
Privacy
- Push button locking. Can be opened from outside with small screwdriver. Turning inside knob or closing door releases button.
Entrance
- Turn/pushbutton locking; pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Pushbutton locking; pushing button locks outside knob until unlocked by key or by turning inside knob.
Classroom Outside knob locked and unlocked by key. Inside knob always unlocked.
Storeroom
- Outside knob always fixed. Entrance by key only. Inside knob always free for exit.
Functions:
Passage - Privacy - Entrance - Classroom - Storeroom.

A SERIES LATCHES & EXTENSION LINK
41 005
- Extension link when used with a 2-3/8” latch (not included) creates a 5” backset latch.
Types:
Deadlatch - Extension.


Schlage

Grade 1 L Series Mortise Locks

L SERIES MORTISE LOCKSETS
- ANSI A156.13 series 1000, Grade 1.
- UL listed for 3 hr fire door.
- Handing: L9000 series lock bodies are field-reversible without disassembly.
- Door thickness: 1-3/4”.
- Backset: 2-3/4”.
- Armored front: 1-1/4” x 8” x 7/32”.
- Spacing: Knob or lever to cylinder, 3-7/8”, knob or lever to thumbturn hub, 2-11/16”.
- Case size: 4-7/16” x 6-1/16” x 1”.
- Bolts: 1” throw stainless steel deadbolt and 3/4” throw stainless steel latch with anti-friction tongue.
- Knob trim: Knobs are heavy-duty wrought brass, bronze or stainless steel.
- Lever trim: Forged brass or bronze and cast stainless steel.
- Stocked less cylinder.
- All trims are supplied with the B wrought rose which is 2-9/16” in diameter L9080L EU.
- Lock may be unlocked electronically by 24VDC @ 150mA current.
- Fail secure.
Passage Latch
- Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress.
Office and Inner Entry
- Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by outside or by knob/lever inside. Outside knob lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Classroom
- Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Storeroom
- Latchbolt retracted by key outside r by knob/lever inside. Outside knob. lever always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Entrance
- Latchbolt retracted by knob/lever from either side unless o tuside is locked by 20° rotation of thumbturn. Deadbolt thrown or retracted by 90° rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/ lever remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Corridor
- Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside lever is always free for immediate egress.
Storeroom lock with deadbolt
- Latchbolt retracted by key outside or by lever or knob inside. Outside knob lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Function:
- Passage Latch - Office and Inner Entry Lock - Classroom - Storeroom Lock - Electrified Storeroom - Entrance - Corridor Lock - Storeroom Lock with Deadbolt.