Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Don-Jo

don-jo door reinforcements-wrap around plates
Back To Main Catagories

Don-Jo

Cylindrical & Deadbolt Wrap Around Plates

Don-Jo-Cylindrical and Deadbolt Wrap Around Plates

WRAP AROUND PLATES FOR CYLINDRICAL DOOR LOCKS AND DEADBOLTS
- All latch embossed plates (CW) have stainless steel threaded insert so latch mounting screws securely hold.
- Constructed of 22 gauge material.

For Cylindrical Door Locks with 2-1/8” Hole
Finish - Backset - Door Thickness - Size
Long:
- Polished Brass - 2-3/8" - 1-3/8" - 4" x 9"
- Stainless Steel - 2-3/8" - 1-3/8" - 4" x 9"
- Polished Brass - 2-3/8" - 1-3/4" - 4" x 9"
- Stainless Steel - 2-3/8" - 1-3/4" - 4" x 9"
- Polished Brass - 2-3/4" - 1-3/8" - 4-1/4” x 9"
- Stainless Steel - 2-3/4" - 1-3/8" - 4-1/4” x 9"
- Antique Brass - 2-3/4" - 1-3/4" - 4-1/4" x 9"
- Polished Brass - 2-3/4" - 1-3/4" - 4-1/4" x 9"
- Stainless Steel - 2-3/4" - 1-3/4" - 4-1/4" x 9"
- Stainless Steel - 2-3/4" - 1-3/4" - 5" x 20"
Short:
- Stainless Steel - 2-3/8” - 1-3/8” - 4” x 4-1/2”
- Polished Brass - 2-3/8” - 1-3/4” - 4” x 4-1/2”
- Stainless Steel - 2-3/8” - 1-3/4” - 4” x 4-1/2”
- Stainless Steel - 2-3/4” - 1-3/8” - 4”-1/4” x 4-1/2”
- Polished Brass - 2-3/4” - 1-3/8” - 4”-1/4” x 4-1/2”
- Polished Brass - 2-3/4” - 1-3/4” - 4”-1/4” x 4-1/2”
- Stainless Steel - 2-3/4” - 1-3/4” - 4”-1/4” x 4-1/2”

For Deadbolts with 1-1/2” Hole
Finish - Backset - Door - Size
- Polished Brass - 2-3/4” - 1-3/4” - 4-1/4” x 4-1/2”
- Stainless Steel - 2-3/4” - 1-3/4” - 4-1/4” x 4-1/2”

For Locks with Extended Backsets
Finish - Backset - Door - Size
- Stainless Steel - 5" - 1-3/4" - 6-1/2" x 9"

Flat Front Wrap-Around with 2-1/8 Hole ** VF = Without Latch Emboss
Finish - Backset - Door - Size
Long:
- Stainless Steel - 2-3/4" - 1-3/4" - 4-1/4" x 9"
Short:
- Polished Brass - 2-3/4” - 1-3/4” - 4”-1/4” x 4-1/2”
- Stainless Steel - 2-3/4” - 1-3/4” - 4”-1/4” x 4-1/2”


Don-Jo

Combo & Blank Wrap Around & Edge Reinforcer

Don-Jo-Combo and Blank Wrap Around and Edge Reinforcer

COMBINATION WRAP AROUND PLATES WITH 2 HOLES
- Constructed of 22 gauge material
- Door thickness: 1-3/4”
Finish - Backset - Size
1-1/2” Top & 2-1/8” Bottom with 4” Centres
- Polished Brass - 2-3/4” - 4-1/4” x 9”
- Stainless Steel - 2-3/4” - 4-1/4” x 9”
1-1/2” Top & 2-1/8” Bottom with 6” Centres
- Polished Brass - 2-3/4” - 4-1/2” x 12
- Stainless Steel - 2-3/4” - 4-1/2” x 12
2-1/8” Holes Top & Bottom with 3-5/8” Centres
- Polished Brass - 2-3/4” - 4-1/4” x 9”
- Stainless Steel - 2-3/4” - 4-1/4” x 9”
2-1/8” Holes Top & Bottom with 6” Centres
- Polished Brass - 2-3/4” - 4-1/2” x 12
- Stainless Steel - 2-3/4” - 4-1/2” x 12

BLANK WRAP AROUND PLATES WITH TRIM SCREWS
- Constructed of 22 gauge material.
Finish - Door Thickness - Size
Long:
- Stainless Steel - 1-3/8” - 4-1/4” x 9”
- Stainless Steel - 1-3/4” - 4-1/4” x 9”
- Stainless Steel - 1-3/4” - 5” x 12”
Short:
- Polished Brass - 1-3/8” - 4-1/4” x 4-1/2”
- Polished Brass - 1-3/4” - 4-1/4” x 4-1/2”
- Stainless Steel - 1-3/4” - 4-1/4” x 4-1/2”

DOOR EDGE REINFORCER FOR DEADBOLTS & KEY-IN-KNOB LOCKS
- Constructed of 22 gauge material.
Finish - Door Thickness - Size
- Stainless Steel - 1-3/8” - 4-1/2” x 1”
- Polished Brass - 1-3/4” - 4-1/2” x 1”
- Stainless Steel - 1-3/4” - 4-1/2” x 1”


Don-Jo

Specialty Wrap Around

Don-Jo-Specialty Wrap Around

MORTISE LOCK WRAP AROUND PLATE FOR 86 CUT-OUT
- 8” x 1-1/4” recess.
- Drill spindle and thumb turn holes in field.
- Rectangle size: 1-5/8” x 7-5/16”.
- Constructed of 22 gauge material.
- Door thickness: 1-3/4”.
Finish - Backset - Size
- Stainless Steel — 5” x 12”
- Stainless Steel - 2-3/4” - 5” x 12”

FOR USE WITH HEAVY DUTY GRADE 1 & 2 KEY-IN-LEVER
- Works with Schlage Rhodes, Arrow Sierra, Yale Augusta, Corbin Russwin 3300 & 3600, Falcon T and B series, LSDA & other Grade 1 & 2 lever sets.
- Constructed of 22 gauge material.
- Door thickness: 1-3/4”.
Finish - Backset - Size
- Stainless Steel - 2-3/4” - 4-3/4” x 9”

FOR KABA/SIMPLEX 1000
- Works with Simplex 1000 lock.
- Constructed of 22 gauge material.
- Door thickness: 1-3/4”.
Finish - Backset - Size
- Stainless Steel - 2-3/4” - 5” x 9”
- Stainless Steel - 2-3/4” - 5” x 15”

FOR CONVERSION OF SIMPLEX 1000 SERIES & ALARM LOCK DL2500, 2700/T2 & 3000 SERIES
- For conversion of Simplex 1000 series, Alarm Lock DL2500, 2700/T2 & 3000 series to key-in-knob lock.
- Constructed of 22 gauge material.
- Door thickness: 1-3/4”.
Finish - Backset - Size
- Stainless Steel - 2-3/4” - 5” x 14”


Don-Jo

Inswing, Narrow Stile & Universal Latch Guards

Don-Jo-Inswing-Narrow Stile and Universal Latch Guards

INSWING LATCH GUARD
- Plates mounted on frame & door interlock to prevent prying.
- 6” version for use with key-in-knob and deadbolt locks.
- 12” version for use with Mortise Locks, Simplex 1000 series, Alarm Lock DL-2500, DL-2700 & 3000, Card Access Systems, etc.
- Constructed of 14 gauge steel.
Finish - Length
- Brass Plated - 6”
- Silver Coated - 6”
- Brass Plated - 12”
- Silver Coated - 12”

NARROW STILE LATCH GUARDS FOR ALUMINUM ENTRANCE DOOR LATCHES & ELECTRIC STRIKES
- LP307 for Aluminum Entrance Doors.
- Fits over cylinder.
- Lock removal not required.
- Hand carriage bolt and rivet supplied.
- No specific tools required.
- 3/8” offset.
- Constructed of 12 gauge material.
GLP307 for Aluminum Entrance Doors -Solves Pull Handle Interference
- Solves pull handle interference handed.
- Centre of cylinder hole is 2-1/2” from end of plate.
NELP207
- Works with Adams Rite locks.
- Protects electric strikes from attacks.
- Cylinder collar protects from wrenching.
- Protects from crowbar attacks.
Finish - Hand - Size
- Duro Coated - LHR - 2-5/8” x 7” x 3/8”
- Silver Coated - LHR - 2-5/8” x 7” x 3/8”
- Duro Coated - RHR - 2-5/8” x 7” x 3/8”
- Silver Coated - RHR - 2-5/8” x 7” x 3/8”
- Stainless Steel - Reversible - 2-5/8” x 7” x 3/8”
- Duro Coated - Reversible - 2-5/8” x 7” x 3/8”
- Silver Coated - Reversible - 3-1/2” x 7”
- Duro Coated - Reversible - 3-1/2” x 7”
ELP208 / ELP208P for Use with Electric Strike
- Designed to fit most electric strikes.
- Completely encases the keeper for maximum protection.
- Use with mortise, keyless locks & exit decices.
- Constructed of 12 gauge steel.
LELP208
- Fits up to 3-3/4” rose.
Description - Finish - Size
- With Cylinder Hole - Duro Coated - 3-1/2” x 8”
- With Cylinder Hole - Silver Coated - 3-1/2” x 8”
- No Cylinder Hole - Silver Coated - 3-1/2” x 8”
- For Levers & Knobs - Silver Coated - 3-1/2” x 8”


Don-Jo

Outswing Latch Guards

Don-Jo-Outswing Latch Guards

OUTSWING LATCH GUARDS
LP111 / LP211
- Completely covers the strike plate.
- Furnished with carriage bolts, washers, & acorn cap nuts for safety and strength.
- Fits 2-3/4” and 2-3/8” backsets.
- Constructed of 12 gauge material.
- Material: LP111 - stainless steel, LP211 - steel. MLP211
- Furnished with carriage bolts, washers, & acorn cap nuts for safety and strength.
- Constructed of 12 gauge steel.
PLP111
- Solid steel pin prevents spreading of door from frame.
- Pin is welded on back leaving no visible point of attack from outside.
- Constructed of 12 gauge stainless steel.
LP107 / LP207
- Furnished with carriage bolts, washers & acorn cap nuts for safety and strength.
- Constructed of 12 gauge.
- Material: LP107 - stainless steel, LP207 - steel.
CLP110
- Commercial type.
- Architectural design.
- 10” for mortise locks.
- Concealed welded studs with fasteners.
- Constructed of 12 gauge stainless steel.
NLP206
- Narrow commercial type.
- 6” for key-in-knobs.
- 10” for mortise locks.
- Constructed of 12 gauge steel.
Finish - Size
For Outswinging Doors - Completely Covers the Strike Plate
- Stainless Steel - 3” x 11”
- Brass Plated - 3” x 11”
- Silver Coated - 3” x 11”
For Outswinging Doors - Completely Covers the Strike Plate
- Silver Coated - 3” x 11”
Pin Latch Protectors for Outswinging Doors
- Stainless Steel - 3” x 11”
For Outswinging Doors
- Stainless Steel - 2-3/4” x 7”
- Brass Plated - 2-3/4” x 7”
- Silver Coated - 2-3/4” x 7”
Commercial Type for Outswinging Doors
- Stainless Steel - 2-1/8” x 10”
Narrow Commercial Type for Outswinging Doors
- Silver Coated - 1-1/2” x 6”
- Silver Coated - 1-1/2” x 10”


Don-Jo

Outswing & Electric Strike Latch Guards

Don-Jo-Outswing-Electric Strike Latch Guards

OUTSWING LATCH GUARDS
- Short Outswing Latch Guards.
- Furnished with carriage bolts, washers & acorn cap nuts for safety & strength.
- Works with up to 3-3/4” rose.
- Constructed of 12 gauge steel.
- 3/8” offset.
Angle Outswing Latch Guards
- 6” for key-in-knobs.
- 10” for mortise Locks.
- Constructed of 10 gauge steel.
- 1-1/2” sheet metal screws for wood or metal.
Adams Rite Latch Lock
- Reversible.
- 3/8” offset, 1-7/16” hole, 1-1/8” backset.
- Constructed of 12 gauge steel.
Folger Adam Electric Strike
- Works with Folger Adams 310 & 710 electric strike models.
- Constructed of 12 gauge stainless steel.
FINISH SIZE
- Short Outswing Latch Guard
- Brass Plated 2-5/8” x 6”
- Silver Coated 2-5/8” x 6”
- Angle Outswing Latch Guard
- Silver Coated 6” 003143
- Silver Coated 10” 003144
Adams Rite Latch Lock
- Silver Coated 2-5/8” x 12”
Folger Adam Electric Strike
- Stainless Steel 1-3/4” x 11-1/4”

UNIVERSAL LATCH GUARD
- For outswing doors with 1” x 8-3/4” cutout.
- For all backsets, single locks, double locks up to 6” on centre & mortise locks.
- Protects latch or bolt, and conceals lip of existing strike.
- * PULP version has pin that prevents spreading of the door from frame.
Finish - Size
- Satin Chrome - 3-1/2” x 11-3/4”
- Brass Plated - 3-1/2” x 11-3/4”
- Duro Coated - 3-1/2” x 11-3/4”
- Silver Coated - 3-1/2” x 11-3/4”
- Satin Chrome - 3-1/2” x 11-3/4”
- Brass Plated - 3-1/2” x 11-3/4"
- Silver Coated - 3-1/2” x 11-3/4”

SLIPPER LATCH PROTECTOR
- Sleek design allows for easy install.
- Mounts under the lockset.
- Works with most Grade 1 & 2 levers and knobs.
- Prepped for most commercial locks.
Finish - Size
- Stainless Steel - 4”x 5”


Don-Jo

Filler & Conversion Plates, Electric Strike Filler Plates & Scar Plates

Don-Jo-Filler and Conversion Plates-Electric Strike Filler Plates and Scar Plates

FILLER & CONVERSION PLATES
Type - Size
- “T” Strike with 160 Cutout - 2-3/4” x 1-3/8”
- ANSI Strike Cutout - 4-7/8” x 1-1/4”
- 161 Strike Cutout - 2-1/4” x 1-1/8”
- 86 Mortise Cutout - 8” x 1-1/4” x 3/16”
- Mortise to 161 KIK Cutout - 8” x 1-1/4”
- Door Hinge Cutout - 4-1/2” x 1-3/4”
- Door Hinge Cutout - 4-1/2” x 1-1/2”
- .060 Hinge Shim - 4-1/2”
- .090 Hinge Shim - 4-1/2”

ELECTRIC STRIKE FILLER PLATES
- Fits selected Folger Adams, Von Duprin, and Rofu strikes.
- Constructed of 13 gauge steel.
Type - Cutout - Size
- ANSI Filler - No - 4-7/8” x 11/4”
- ANSI Filler - Yes - 4-7/8” x 11/4”
- Filler - No - 9” x 1-3/8”
- Filler - Yes - 9” x 1-3/8”

SCAR PLATES
- Used to convert 2- 3/8” to 2-3/4” backset.
DSP135
- Fits under deadbolt collar.
SP135
- Fits under rose of key-in-knob or deadbolt locks.
Finish - Covers - Hole - Size
- Polished Brass 2-1/8” 1-1/2” 3-1/2”
- Stainless Steel 2-1/8” 1-1/2” 3-1/2”
- Polished Brass 2-1/8” 2-1/8” 3-1/2”
- Stainless Steel 2-1/8” 2-1/8” 3-1/2”


Don-Jo

Hole Filler Plates, Remodel Kits, Door Pull & Hinge Pins

Don-Jo-Hole Filler Plates-Remodel Kit-Door Pull and Hinge Pins

HOLE FILLER PLATES
BF135
- Covers up to 3-3/4” hole.
BF161
- Covers up to 2-1/8” hole.
BF178
- Covers up to 1-1/2” hole.
PDF161
- Covers up to 2-1/8” hole under rim panic device.
CP258
- 2-5/8” cylinder plate has indents at 3 & 9 o’clock to prevents collar from shifting on wood or metal.
- Can be used with rim or mortise cylinders.
Finish - Size
- Prime Coat - 3-3/4”
- Brass Plated - 2-5/8”
- Prime Coat - 2-5/8”
- Silver Plated - 2-5/8”
- Prime Coat - 1-7/8”
- Brass Plated - 2-5/8”
- Silver Coated - 2-5/8”
- Prime Coat - 2-1/8”

REMODEL PLATES & KIT
RP13509
- Escutcheon for remodelling from mortise lock to key-in-knob.
RPK109
- Kit version includes 2 of RP13509 plates with 1 of CV86 mortise to key-in-knob filler adapter plate.
Finish - Description
- Polished Brass - Remodel Plate
- Stainless Steel - Remodel Plate
- Polished Brass - Remodeller Kit
- Stainless Steel - Remodeller Kit

DOOR PULL
- Door pull with a 2-1/8” hole.
Finish - Size
- Stainless Steel - 4-1/2” x 3”

HINGE PINS
- Used for preventing the removal of doors by pulling the hinge pins.
- 2 per package.
Type - Head
- Commercial - #12
- Residential - #10


Don-Jo

Lip Strikes, Long Strikes, Push/Pull Plate & Kick Plates

Don-Jo-Lip Strikes-Long Strikes-Push-Pull Plate and Kick Plates

2-3/4” EXTENDED LIP STRIKES
- For use where strike holes are inset into the jamb.
- Constructed of 13 gauge material.
- Brass plated.
Size:
- 2-3/4” x 2”
- 2-3/4” x 2-1/2”
- 2-3/4” x 3”
- 2-3/4” x 5”

LONG STRIKES
- Designed to work with key-in-knobs or deadbolts.
- Constructed of 13 gauge steel.
Size - Finish
Single Hole: To Work with Key-In-Knob or Deadbolt
- 8” x 1-3/4” - Brass Plated
- 8” x 1-3/4” - Silver Plated
- 12” x 1-3/4” - Brass Plated
- 12” x 1-3/4” - Silver Plated
- 18” x 1-3/4” - Brass Plated
Double Hole: To Accommodate 3-5/8” & 4” Centres
- 12” x 1-3/4” - Brass Plated
- 12” x 1-3/4” - Silver Plated
Double Hole: To Accommodate 5-1/2” & 6” Centres
- 12” x 1-3/4” - Brass Plated
- 18” x 1-3/4” - Brass Plated
- 18” x 1-3/4” - Silver Plated

PUSH/PULL PLATE & KICK PLATES
1866
- Constructed of 11 gauge stainless steel
- Projection: 1-1/4”
- ANSI A156.6 J303
KP
- Kick plate packaging includes an outer corrugation that protects the kick plate and allows it to be hung for display or stacked.
Size - Finish
- 3-1/2” x 15-3/4” - Stainless Steel
- 6” x 34” - Stainless Steel


Don-Jo

Deadbolt Security Strike, T-Strike & Door Hardware

Don-Jo-Deadbolt Security Strike-T Strike and Door hardware

DEADBOLT SECURITY STRIKES
- Supplied with 3” screws to penetrate frame studs for additional strike strength.
- Constructed of 13 gauge steel.
Finish - Size
- Silver Coated - 4-7/8” x 1-1/4”
- Brass Plated - 8” x 1-3/8”
- Silver Plated - 8” x 1-3/8”

“T” STRIKE
- Constructed of 18 gauge material.
Finish - Size
- Stainless Steel - 2-3/4” x 1-1/8”

DOOR HARDWARE
1550/1551: Aluminum Door Flush Bolt
- Radius end.
- 1550 - 1/8” offset, 1551 - 1/4” offset.
1555: Metal Flush Bolt
- UL rated, 3/4” bolt throw, 3/4” rod backset, 12” rod length, 1-1/2” adjustable bolt head.
- Fits ANSI door & frame prep.
- Metal doors faceplate: 1” x 6-3/4”, strike: 15/16” x 2-1/4”, guide: 1” x 2”.
1557: Wood Flush Bolt
- UL rated, 3/4” bolt throw, 3/4” backset.
- Wood door faceplate: 1” x 6-3/4”, strike: 15/16” x 2-1/4”.
- Door strength maintained by corner reinforcement plate.
1603: Door Flip Guard
- Ball bearing design secures flip guard to lock door from interior for additional security.
2080: Gravity Door Coordinator
- UL rated.
- Drop arm type gravity door coordinator.
- Adjustable.
- Field reversible.
HDCC2512: Heavy Duty Crash Chain
- Heavy duty steel chain prevents door from opening wide when caught by high winds.
Finish - Size
- Duro - 15/16” x 4-1/4”
- Silver Coated - 15/16” x 4-1/4”
- Duranodic - 15/16” x 4-1/4”
- Silver Coated - 15/16” x 4-1/4”
- Oil Rubbed Bronze - 1” x 6-3/4”
- Satin Chrome - 1” x 6-3/4”
- Satin Chrome - 1” x 6-3/4”
- Polished Brass
- Satin Chrome - 5-3/8” x 7”
- Gray - 25-1/2”