Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Electronic Access Controls

Electronic Access Control
Back To Main Catagories

Detex

Standalone Exit Alarms

Electronic Access Controls-Detex-Standalone Exit Alarms

EAX300 BATTERY POWERED DOOR PROPPED ALARM
The Detex EAX-300 series is designed for applications where doors may be used for egress or ingress, but may not be held or propped open. Door open times from 1 second to 2 minutes (15 second default) are field selectable. The smaller size makes installation quick and easy.

- Helps keep energy costs down by ensuring doors are closed.
- Quick, easy installation saves time and money.
- Alarm silences when door is closed, no waiting for key-holder to arrive.
- Secure, tamper resistant housing.
- Patented plastic template assures accurate installation by providing foolproof alignment with internal magnetic door contact.
- Tapered cover allows for installation on narrow stile doors, 2” minimum.
- Intelligent circuit senses the external magnet location automatically and sets the correct door handing.
- 100 dB piezo alarm.
- 9VDC battery operated with low battery alert.
- LED visual arming indicators.
- Size: 2.10”W x 7.7”H x 2.375”D.
- Mortise cylinder with standard Yale cam required (sold separately).
- Accepts 1”, 1-1/8” & 1-1/4” cylinders.

EAX500 STANDALONE BATTERY POWERED EXIT ALARM
- Self-contained door alarm with 100 dB piezo horn that sounds to warn unauthorized use of a door or gate.
- Secure, tamper resistant housing.
- Patented plastic template allows for foolproof alignment of internal magnetic door contact and accurate installation of unit.
- Tapered cover allows for installation on narrow stile doors that are 2” minimum width.
- Intelligent circuit senses the external magnet location automatically and sets the correct door handing.
- Size: 7.7”H x 2.1”W x 2.375”D.
- Patented cam assembly automatically adjusts for different sizes of cylinders without use of spacers.
- Extended bypass allows alarm to remain bypassed when door is open and automatically rearm upon door closing.
- 9VDC battery operated with low battery alert.
- Has LED visual and audible arming indicators.
- Field selectable 2-minute auto rearm, if desired.
- Field selectable status indicators if desired.
- Mortise cylinder with standard Yale cam required (sold separately).
- Accepts 1”, 1-1/8” & 1-1/4” cylinders.


Detex

Exit Control Locks, Accessories & Fire Rated Exit Control Locks

Electronic Access Controls-Detex-Exit Control Locks-Accessories and Fire Rated Exit Control Locks

EXIT CONTROL LOCK
- Attack resistant design withstands over 2200 lbs of outside pull force.
- Reduces internal and customer theft.
- Single point 1” throw saw resistant dead bolt.
- 100 decibel alarm, powered by 9-volt battery (included).
- Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders.
- Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed.
- Non-handed.
- Locking and unlocking the dead bolt always arms and disarms the alarm.
- Resetting the alarm can only be accomplished with a control key.
- Comes in English & French.

ACCESSORIES
ECL2111K
- Siren/battery conversion kit - for ECL-230C & D.
- Converts ECL-230 6 volt lantern battery to 9 volt battery & siren.
ECL435K
- Adjustable surface strike bracket for some double door applications where one door is held closed with surface or flush bolts.
- For use on left hand, right hand inswinging doors or double doors with one door stationary using flush bolts or DDH-2250.
ECL437K
- Adjustable surface strike for use with outswinging doors.
PP5572
- Cover lock, nut, and 2 keys.
Description
- 9 Volt Conversion Kit
- Adjustable Surface Strike
- Standard Strike
- Cover Cam Lock for ECL230, EAX300 & EAX500

ECL600 FIRE RATED EXIT CONTROL LOCKS
- Fire rated and code-compliant relatching exit device.
- Attack resistant design withstands over 2200 lbs of outside pull force.
- Reduces internal and customer theft.
- 1” throw saw resistant dead bolt & 3/4” latching bolt.
- 100 decibel alarm, powered by 9-volt battery (included).
- Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders.
- Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed.
- Non-handed.
- Locking and unlocking the dead bolt always arms and disarms the alarm.
- Resetting the alarm can only be accomplished with a control key.
- Comes in English & French.


Detex

Hinge Bolts, Fire Rated Alarmed & Delayed Egress Exit Devices

Electronic Access Controls-Detex-Hinge Bolts-Fire Rated Alarmed and Delayed Egress Exit Devices

HINGE BOLTS
- Provides hinge-side protection against break-ins.
- Adds additional locking points, improving holding strength to slow down crowbar attacks.
- Easy to install.
- Can be added to almost any outswing door application.
- Choose the right level of protection with kits of 1 bolt, 2 bolts or 3 bolts.
- Kits include through-bolt mounting hardware.
- One piece stainless construction provides superior holding strength.
- Excellent for exterior application or that doors that get wet.
Description - Finish
- Single Hinge Bolt - Grey
- Single Hinge Bolt - Black
- Double Hinge Bolts - Grey
- Double Hinge Bolts - Black
- Triple Hinge Bolts - Grey
- Triple Hinge Bolts - Black

V40 ALARMED & DELAYED EGRESS EXIT DEVICES
V40EB
- Reduces internal and customer theft while meeting building code requirements.
- Alarmed 100 decibel exit device powered by standard 9-volt battery.
- Stainless steel, 3/4” deadlocking Pullman-type latch bolt.
- Heavy-duty ribbed aluminum rail extrusion.
- Fits 36” doors, (can be cut down in the field) 1-3/4” to 2-1/4” thick with minimum 2-1/2” stiles.
- 1/8 turn of mortise cylinder provides dogging of the device.
- Controls foot traffic, deters unauthorized exits, and prevents loss.
- Heavy-duty angled end cap.
- Accommodates all sizes of mortise cylinders with a standard Yale cam; collar is required for 7-pin IC cylinders.
- Patented back plate and plastic strike locator provide paperless template for perfect alignment of unit on door and frame.
- Field selectable key rearm or 2 minute auto rearm.
- Visual and audible arming indicators status are field selectable.
V40EE
- All the features of the V40EB above with delayed egress.
- Powered by regulated power supply that delivers a constant 24VDC of filtered and regulated voltage at a rated load of 1A.
- Fire alarm input can be connected at power supply.
- Remote signal output and remote bypass input standard.
- Includes delayed egress panic bar, 24VDC filtered and regulated power supply, 3’ confuit loop and door sign that says “PUSH UNTIL ALARMS SOUNDS, DOOR CAN BE OPENED IN 15 SECONDS”.
- 9V battery provides alarm function only in case of power failure.
Function - Language
- Standard - English
- Standard - French
- Delayed Egress - English
- Sticker in French - French


Dorma

Floor Closers & Door Holders

Electronic Access Controls-Dorma-Floor Closers and Door Holders

BTS80 FLOOR CLOSER
- Replacement body is 13-7/16"L x 2-3/8"D.
- Cover not included.
- Mechanical backcheck at approximately 70º.
- Selectable delayed action between 175º and 75º.
- Delayed action is functional when hold open is not engaged.
- Selectable multipoint hold open between approximately 75º and 175º.
- Adjustment for hold open between 75º and 105º.
- Accommodates doors weighing up to 660 pounds and 4'-6" wide interior and 4'-0" exterior.
- Closer adjustment in cement case provides lateral and longitudinal adjustment of 1/4" and height adjustment of 5/32".
Size:
- 2
- 3

ELECTROMAGNETIC DOOR HOLDER
- Dual voltage capability reduces stocking requirements.
- Low current draw allows savings on power supplies and backup batteries.
- Optional extension rods fit on standard catch plate to accommodate deeper door to wall conditions.
- Low residual magnetism allows easy release of door.
- All electrical values +10% to –15%.
- Floor & wall mounted styles.
- Can be manually pulled from hold open position.
- Silent operation.
- Holding force 15–25 lbs nominal.
- Can be manually pulled from hold open position with 25-40 maximum hold open force.
- Voltage: 24 VAC/DC or 120 VAC.
- Amps: .015.
- Meets ADA requirements with minimal spring force door closers.
- ANSI A156.15 Grade 1.
- UL and cUL listed.
- Finish: Satin chrome.
EM504
- Semi flush wall mount.
- Overall projection: 3-1/2”.
EM508
- Surface wall mount.
- Overall projection: 4-1/16”.
Description:
- Long Catch
- Short Catch


RCI

4 Series Electric Strikes

Electronic Access Controls-RCI-4Series Electric Strikes

4 SERIES COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
- Body only, faceplates sold separately.
- ANSI-size faceplate: 1-1/4” x 4-7/8”.
- Accommodates 3/4” latch projection (pullman design not included).
- Enlarged latch cavity width allows compatibility with cylindrical and centreline mortise locks (including 3-piece anti-friction type) and mortise exit devices.
- 1-1/2” cut-out depth accommodates most aluminum and hollow metal frames.
- Use with wide range of door thicknesses: 1-3/8” to 2-3/8”.
- AC/DC input acceptable for all fail secure models.
- Fully reversible for right or left-hand doors.
- Standard mounting tabs and fasteners included.
- Unique anti-vibration design prevents manipulation by vibration.
- Finish: Stainless steel.
- UL 1034 burglary resistant - highest level 1000 lbs of static strength.
- Meets ANSI/BHMA A156.31 Grade 1.
- Non-handed.
Description:
- 12VAC/DC - Body
- 11-16VAC - Body
- 24VAC/DC - Body

4 SERIES FACEPLATES
B4714 - For 4114
- Use with centreline exit devices, cylindrical or centreline mortise locks.
- 1-1/4” x 4-7/8”.
B4704 - For 4104
- Use with aluminum, cylindrical or centreline mortise locks and centreline exit devices.
- 1-1/4” x 4-7/8”.
B4705 - For 4105
- Use with centreline exit devices, aluminum, cylindrical or centreline mortise locks.
- 1-1/8” x 5-7/8”.
B4707 - For 4107
- Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices.
- 1-1/4” x 6-7/8”.
B4708 - For 4108
- Use with aluminum locks, cylindrical or centreline mortise locks and centreline exit devices.
- 1-7/16” x 7-15/16”.
For Frame - Corners
- 4114 Hollow Metal - Square
- 4104 Aluminum - Round
- 4105 Aluminum/Wood - Round
- 4107 Aluminum - Round
- 4108 Aluminum/Wood - Round


RCI

F4 & 7 Series Electric Strikes

Electronic Access Controls-RCI-F4 and F7 Series Electric Strikes

F4 SERIES FIRE RATED COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
- For extra-strength in heavy-duty applications and is fire labeled.
- Unique anti-vibration design prevents manipulation by vibration.
- Crossed wires are never a problem as the coil is not polarity-conscious.
- Accommodates 3/4” latch projection (pullman design not included).
- Enlarged latch cavity width allows compatibility with cylindrical, and centerline mortise locks (including 3-piece anti-friction type) and mortise exit devices.
- 1-1/2” cut-out depth accommodates most aluminum and hollow metal frames.
- Door thicknesses: 1-3/8” to 2-3/8”.
- AC/DC input acceptable for all fail secure models.
- Fully reversible for right or left-hand doors.
- Standard mounting tabs and fasteners included.
- ANSI/BHMA A156.31 Grade 1.
- UL listed: UL 10C fire rated 1-1/2 hr.
- UL 1034 burglary resistant - highest level 1,000 lbs static strength.
- ANSI stainless steel faceplate: 1-1/4” x 4-7/8”.
- Stainless steel finish.
Voltage:
- 12VDC
- 24VDC

7 SERIES ADJUSTABLE ELECTRIC STRIKES
- Body only, faceplates sold separately.
- RCI’s 7 Series electric strikes allow installers to adjust the strike pivot horizontally for precise alignment.
- Unique anti-vibration design prevents manipulation by vibration.
- Crossed wires are never a problem, as the coil is non polarity-conscious.
- Accommodates 5/8” latch projection (pullman design not included).
- Unique anti-vibration design prevents manipulation by vibration.
- Enlarged latch cavity width allows compatibility with cylindrical, narrowline aluminum and centerline mortise locks (including 3-piece anti-friction type).
- 1-1/2” cut-out depth accommodates most aluminum and wood frames.
- Door thicknesses: 1-3/8” to 2-3/8”.
- AC/DC input acceptable for fail secure models.
- Fail secure.
- Non-handed.
- Standard mounting tabs, fasteners, and trim plate included.
- 1/8” horizontal adjustment.
- UL listing: UL 1034 burglary resistant, 500 lbs of static strength.
- Modular design.
Description:
- 12VDC Body
- 24VDC Body


RCI

7 Series Electric Strikes Faceplates, Jig & 5 Series Electric Strike

Electronic Access Controls-RCI-7Series Electric Strikes Faceplates-JIG and 5Series Electric Strike

7 SERIES FACEPLATES
B4714 - For 7114
- Use with centreline exit devices, cylindrical or centreline mortise locks.
- 1-1/4” x 4-7/8”.
B4704 - For 7104
- Use with aluminum, cylindrical or centreline mortise locks and centreline exit devices.
- 1-1/4” x 4-7/8”.
B4705 - For 7105
- Use with centreline exit devices, aluminum, cylindrical or centreline mortise locks.
- 1-1/8” x 5-7/8”.
B4707 - For 7107
- Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices.
- 1-1/4” x 6-7/8”.
B4708 - For 7108
- Use with aluminum locks, cylindrical or centreline mortise locks and centreline exit devices.
- 1-7/16” x 7-15/16”.
For Frame - Corners
- 7114 Hollow Metal - Square
- 7104 Aluminum - Round
- 7105 Aluminum/Wood - Round
- 7107 Aluminum - Round
- 7108 Aluminum/Wood - Round

4 & 7 SERIES FRAME PREP JIG
- Improves installation accuracy, and aids in cutting of aluminum or metal frames.
- Frame prep jig for ANSI-sized electric strike
- For series 4104/4304, 4114/4314, 7104/7304, 7114/7314
Finish:
- Aluminum

5 SERIES
Finish:
- Aluminum


RCI

6 Series Electric Strikes

Electronic Access Controls-RCI-6Series Electric Strikes

7 SERIES FACEPLATES
- Body only, faceplates sold separately.
- Field selectable lock mode – choose fail secure or fail safe with the turn of a dial (fail secure mode requires DC voltage).
- Field selectable voltage input – accommodates 12 or 24VDC, and 12 to 24VAC, and even 16VAC in one strike.
- Low profile version (L) is shallow enough for use with narrow stile aluminum frames only 1-1/16” deep, standard version (S) requires 1-3/16” frame depth.
- 1/4” horizontal adjustment.
- Modular “plug-in” wire connectors for fast hook-up.
- Tested to over 1,000,000 cycles.
- UL listed 1034 burglary resistant, 1500 lbs of static strength.
- Modular “plug-in” wire connectors for fast hook-up.
AS65LMKM
- The latch monitor is a SPDT switch with a trigger located in the strike cavity to indicate the presence of a latch bolt when the door is closed.
- The keeper monitor is a SPDT switch that will indicate when the keeper moves from the closed (normal) position to the open position.
NOTE: LMKM switches are rated at 2 amps @ 24VDC.
Description - Latch Projection
- Low Profile Body - 5/8”
- Standard Profile Body - 3/4”
- LMKM Standard Profile Body - 3/4”

6 SERIES UNIVERSAL STRIKE FACEPLATES
B614 32D - For S6514-Standard/L6514-Low
- Use wi th centreline exit devices, cylindrical or centreline mortise locks.
- 1-1/4” x 4-7/8”.
B604 32D - For S6504-Standard/L6504-Low
- Use with aluminum, cylindrical or centreline mortise locks and centreline exit devices.
- 1-1/4” x 4-7/8”.
B605 32D - For S6505-Standard/L6505-Low
- Use with centreline exit devices, aluminum. cylindrical or centreline mortise locks.
- 1-1/8” x 5-7/8”.
B607 32D - For S6507-Standard/L6507-Low
- Use with aluminum locks, cylundrical or centreline mortise locks and mortise exit devices.
- 1-1/4” x 6-7/8”.
B608 32D - For S6508-Standard/L6508-Low
- Use with aluminum locks, cylindrical or centreline exit devices.
- 1-7/16” x 7-15/16”.
For Frame - Corners
- S6514/L6514 Hollow Metal - Square
- S6504/L6504 Aluminum - Round
- S6505/L6505 Aluminum/Wood - Round
- S6507/L6507 Aluminum/Wood - Round
- S6508/L6508 Aluminum/Wood - Round


RCI

F2 Series Fire Rated & 15 Series Economy Electric Strikes

Electronic Access Controls-RCI-F2Series Fire Rated and 15Series Economy Electric Strikes

F2 SERIES FIRE RATED COMMERCIAL DUTY CENTRELINE ELECTRIC STRIKES
- Modular design allows compatibility with most locks without having to order special faceplates.
- Includes offset and centreline faceplates.
- Adjustable deadbolt keeper and deadlatch ramp.
- Heavy-duty stainless steel construction.
- Fits HES 1006 (1003) frame cutout.
- Accommodates 3/4” latch projection.
- Faceplate and anti-tamper security screws included for centreline latch entry.
- Unique sliding shim design for up to 1/8” (3mm) horizontal adjustment for misaligned frames.
- Vertical adjustability of strike for precise positioning of lockset.
- Accommodates up to 1” deadbolt; night-latch function only, bolt will not release.
- Field selectable voltage input – accommodates 12 or 24VDC and 12 to 24VAC.
- Hex and security driver bit included.
- Low current draw (0.19 Amps @24VDC).
- “Cool Keeper” solenoid design prevents keeper from heating up.
- Plug-in wire connector.
- Trim plate included.
- Non-handed.
- UL 10C, 3 hour fire-rated (fail secure only).
- UL listing 1034, burglary resistant listed, 1500 lbs static strength.
- Factory tested to meet ANSI/BHMA 156.31 for strength and endurance.
- Non fire-rated version (fail safe) available by special order: Model# 2364.
For Finish:
- Centreline Latch Entry Stainless Steel

15 SERIES ECONOMY STRIKES
For light use with narrowline aluminum cylindrical locks.
15BS
- Replaces Edwards #9.
- For special offset latch entry.
- Voltage: 11-16 VAC.
- Size: 1-1/4” x 5-7/8”.
- 5/8” latch projection.
- Fail secure.
- For hollow metal, aluminum or wood frames.
- Non-handed.
15CA
- Replaces Peso 710.
- For centerline latch entry.
- Voltage: 11-16 VAC.
- Size: 1-1/4” x 5-7/8”.
- 5/8” latch projection.
- Fail secure.
- For hollow metal, aluminum or wood frames.
For Faceplate:
- Special Offset Latch Entry Satin Chrome
- Centreline Latch Entry Aluminum


RCI

0 Series Rim Electric Strikes

Electronic Access Controls-RCI-0Series Rim Electric Strikes

0161 RIM ELECTRIC STRIKES
- For Hollow Metal, Aluminum or Wood Frames.
- Universal design accommodates most manufacturers’ exit devices.
- Accommodates 1/2” to 3/4” Pullman latch projection.
- Extensive horizontal adjustment.
- Fully reversible (non-handed).
- UL 1034 Listed for 1500lbs of static strength, burglary resistant.
- Size: 1-3/4”W x 9”H x 3/4”D.
* A minimum frame depth of 1-5/8” for surface-mounted installations.
Description:
- Fail Secure 12VAC/DC Strike
- Fail Secure 24 VAC/DC Strike
- Double Door Housing

0162 RIM ELECTRIC STRIKES
- No frame cutting required - surface mounted.
- Compatible with most major exit devices.
- Accommodates exit devices with latch projections from 1/2” to 3/4” (13mm - 19mm).
- Ensure proper latch alignment with horizontal adjustment up to 1/4” (6.4mm) to compensate for door misalignments.
- Non-handed.
- Field selectable voltage input -12 or 24VDC and 12 to 24VAC (even 11 to 16VAC).
- Horizontal solenoid prevents manipulation from vibration.
- Hex socket head cap screws for added support and tamper resistance.
- Mounting spacer included to provide enhanced latch engagement.
- UL 1034 Listed for 1500lbs of static strength, burglary resistant.
- Size: 1-3/4”W x 9”H x 3/4”D.
Description:
- Fail Secure 12/24VAC/VDC Strike
- Double Door Housing

0563 1/2” RIM ELECTRIC STRIKE
- Surface mounted - no frame cutting required.
- New third wire for cooler operation.
- Conventional keeper design (one moving part) - promotes even load distribution.
- Lockdown holes for secure mount.
- Compatible with most Pullman latch exit devices.
- Accommodates exit devices with latch projections from 1/2”-3/4” (13mm-19mm).
- Horizontal adjustment ensures proper latch positioning to compensate for door misalignments - up to 1/4” (6.4mm).
- Non-handed - for use with right and left handed doors.
- Field selectable voltage input.
- Low Energy - 0.01A (10mA) Auto-sensing 12-24VDC.
- Plug-in wire connector.
- Hex socket head cap screws for added support and tamper resistance.
- UL 1034 Listed for 1500lbs of static strength, burglary resistant.
- Size: 1-3/4”W x 9”H x 1/2”D.
- PoE power friendly.
Description:
- Fail Secure/Fail Safe 1/2” 12/24VDC Strike


RCI

Magnetic Locks

Electronic Access Controls-RCI-Magnetic Locks

8 SERIES MULTIMAG®
- 1500 lbs holding force per magnet.
- Adjustable keyhole mounting bracket for simplified installation.
- Built-in time delay (instant release with adjustable relock, programmable from 0-110 seconds).
- Field selectable voltage – 12/24VDC.
- Convenient plug-in wiring terminals.
- Stabilizing 4-bolt “Drop Stop“ mag mounting (8-bolt for 8320).
- MOV surge protection.
- No residual magnetism.
- Low energy consumption.
- Hardened steel armature nut.
- Self-drilling tek™ fasteners.
8310
- Single outswinging interior or perimeter doors.
- Size: 1-5/8” x 2-7/8” x 10-1/2”.
- Delayed egress electromagnetic lock available by special order: Model# DE8310.
DSS Option - Door Status Sensor
- Ceramic magnet-reed type sensor for remote indication of door status (opened or closed, independent of local power); magnet embedded in armature for tamper resistance; reed switch inside electronic housing cavity for easy access.
8320
- Double outswinging interior or perimeter doors without mullion.
- Size: 1-5/8” x 2-7/8” x 21”.
Description - Finish
- Standard Mag Lock Aluminum
- Mag Lock with Door Status Sensor Aluminum
- Brackets for 8310 Aluminum
- Double Standard Mag Lock Aluminum

MINIMAG® & MICROMAG®
- For interior use only.
- Brushed anodized aluminum finish.
- Low energy consumption.
- Field-selectable voltage 12/24VDC.
- MOV surge protection.
- Hardened steel armature nut.
- No residual magnetism.
- Low profile design.
8360 - Mortise minimag®
- Remote lock status - RLS.
- Holding force: 750 lbs.
- 1-1/16” x 1-1/2” x 9”.
8371 - Surface MiniMag®
- Holding force: 750 lbs.
- 1” x 1-7/8” x 9-3/8”.
8375 - Surface MicroMag®
- Holding force: 250 lbs.
- 13/16” x 1-1/2” x 6-17/32”.
Type - Finish
- Sliding - Aluminum
- Swinging - Aluminum
- Swinging - Aluminum


RCI

Magnetic Gate Lock, Electronic Cabinet Lock & Power Supply Accessory

Electronic Access Controls-RCI-Magnetic Gate Lock-Electronic Cabinet Lock-Power Supply Accessory

8380 GATEMAG® MAGNETIC GATE LOCK
- Up to 1500 lbs holding force.
- No residual magnetism.
- Weather-resistant stainless steel housing.
- Versatile face or bottom mounting.
- Built in RLS (remote lock status).
- Field selectable voltage 12/24VDC.
- Throughbolt mounting.
- 6-1/2’ wire cable.
- Conduit fitting 1/2” inside diameter, 3/4” outside diameter.
- MOV surge protection.
- cULus Listed.
Size:
- 1-3/4” x 2-1/2” x 8-7/8”

ELECTRIC CABINET LOCK
- Field selectable fail secure or fail safe assembly.
- Field selectable dual voltage 12/24VDC operation.
- Plated (rust-resistant) self adjusting steel locking pin assembly.
- 440 lbs holding force.
- Low energy consumption (184mA @ 12VDC, 90mA @ 24VDC).
- Includes hardware kit.
- For sliding or swinging cabinet doors.
- Elongated holes on tongue for adjustable mounting.
- Dual Monitoring option available by special order: Model# 3513DM.
Description - Size
- Electric Cabinet Lock - 1-1/8” x 1-3/16” x 2-7/8”

365 DAY, 99 EVENT TIMER
- 2 momentary or latching SPDT relays to control locks and other electronically controlled devices or circuits.
- 40 holidays and 99 user events.
- Automatic voltage selection 12 to 24 VAC or DC.
- Large alpha-numeric backlit LCD display for easy programming 16 characters by 2 line LCD.
- Lithium battery included.
- Ideal for openings requiring scheduled access.
Size:
- 3-3/4” x 4-11/16” x 1”


RCI

Power Supply & Power Supply Accessories

Electronic Access Controls-RCI-Power Supply and Power Supply Accessories

10 SERIES 1.5 AMP POWER SUPPLIES
- Field selectable voltage 12/24VDC.
- Exceptional brown out protection.
- Surge protection input.
- Class 2 fused DC output.
- AC and DC visual indication.
- Precise battery regulation for lead acid batteries.
- Online batteries provide no drop switch over on AC failure.
- Form C relay to indicate AC failure.
Input:
- AC input 115VAC/60Hz.
- AC visual indicator.
Output:
- Norminal output voltage 12VDC or 24VDC.
» 1.5 Amp supply current at 12VDC.
» 1 Amp supply current at 24VDC.
- Thermally protected DC output.
- AC fail relay.
- Visual indication.
- Size: 12.5” x 12.5” x 4”.
Certifications:
- UL listed.
- Access control unit power supply.
- Power distribution modules and 24V to 12V DC convertor are listed subassembles.
Applications:
- To power access control systems.
- To power electric locking systems.
- To power electromagnetic locking systems.
- Field Selectable 12VDC and 24VDC output via slide switch.
Description:
- 1.5 Amp Power Supply
- 1.5 Amp Power Supply with Fire Panel Disconnect

PLUG & WIRE-IN TRANSFORMERS & RECTIFIER
T1002/ T1008 - Plug-In Transformer
- Plug into a standard 115VAC outlet to provide low voltage AC output.
- Thermally protected to prevent overload due to short.
- Transformer will need to be replaced once fuse is blown.
- UL listed.
- T1102 - size: 2” x 2-1/4” x 3-1/4”, T1108 - size: 2-3/8” x 2” x 2”.
T1009 - Wire-In Transformer
- For permanent installations requiring hard wiring.
- Size: 2-3/8” x 2” x 2”.
R10R1 - Bridge Rectifiers
- Bridge rectifier changes AC power source to DC output for DC strikes & mag locks.
Description - Output - Current
- Plug-In Transformer - 12VAC - 20VA
- Plug-In Transformer - 24VAC - 20VA
- Wire-In Transformer - 24VAC - 40VA
- 1 Amp Rectifier


RCI

Magstripe Card Reader & Standalone Digital Keypads

Electronic Access Controls-RCI-Magstripe Card Reader-Standalone Digital Keypads

9 SERIES EASY READ-MAGSTRIPE™ CARD READER
- Stainless steel read head.
- Includes starter pack with master card and 100 enrollment (shadow) cards used to enroll and delete users.
- Programming of opening time and lock mode is set with master card.
- Can program up to a maximum of 1,000 cards per reader.
- Satin chrome finish.
- Accepts any ANSI standard Track II magstripe® card such as a drivers license or credit card.
- For internal or external use (-20°C).
Size:
- 1-3/8”W x 3-1/2”H x 1-3/8”D.
Description:
- Reader with Starter Pack
- Package of 100 Shadow Cards

9 SERIES STANDALONE DIGITAL KEYPADS
9212I/ 9212ILW
- Keypad programmable.
- Single gang flush mount design.
- 120 user capability.
- Electronics mounted on back of keypad.
- Stainless steel faceplate.
- Three LED’s to indicate status and provide user with visual PIN entry confirmation.
- Field selectable 12-24 VAC/VDC.
9212I - Interior Use
- Input trigger for Request-To-Exit (REX) or other open circuit contact.
- Up to 4 independant outputs assignable by code.
- All outputs programmable for latched or timed operation.
Size:
- 2-3/4” x 4-1/2” x 1-1/4”
9212ILW - Interior or Exterior Use
- Heavy chrome plated trim ring.
- Key press feedback via sounder and yellow LED.
- Built-in assignable sounder.
- Bi-color Red/Green LED indicates relay status.
Size:
- 3-3/8” x 5-1/8” x 5/8”
9235I - Interior Use
- Accommodates up to 120 users.
- EEPROM memory ensures programming remains intact when unit is not powered.
- Secure access codes (4-8 digits).
- Silent mode (audible annunciation of key presses can be disabled).
- Programmable lockout.
- Variable output time delay (1-60 seconds).
- Interior and exterior models.
- Surface mount design.
- 12 VDC.
Size:
- 2-3/4” x 4-1/2” x 1-5/32”
Relay Rating - Input Voltage - Backlit
- 8A@250V 12-24 VAC/VDC No 100313
- 2A@30VAC/DC 12-24 VAC/VDC Yes 101780
- 5A@30V 12VDC Yes


RCI

Key Switches & Buttons

Electronic Access Controls-RCI-Key Switches and Buttons

TAMPER RESISTANT KEY SWITCHES
- Extruded clear aluminum 1/4” plate with beveled edges.
- UL rated switches are SPDT and can be used for Normally Open (NO) or Normally Closed (NC) applications.
- Contacts are rated at 3A@125 VAC, 1A@250VAC.
- Can mount 2 switches on easy lock-down dual-switch bracket.
- For 1-1/8” mortise cylinders with straight or clover cams (not supplied).
- Supplied with spanner screws & wrench.
960
Size:
- 3” x 4-3/4”
960N
Size:
- 1-5/8” x 4-3/4”
Type - Mounting
- Momentary - Gang
- Maintained - Gang
- Maintained - Narrow Stile
- Momentary - Narrow Stile
- Momentary - Switch Only
- Maintained - Switch Only

HANDICAP EXIT BUTTONS & SWITCHES
- Momentary action switch standard.
909
- 2-3/8” x 2-3/8”
- Surface mount under desk or counter for concealment.
916B/ 916NB
- 916B: 3” x 4-3/4”
- 916NB: 1-5/8” x 4-3/4”
- Tamper resistant handicap blank blue button.
- Ideal for Request-To-Exit (REX) applications.
- 20 gauge stainless steel faceplate.
917
- 2-3/4” x 4-1/2”
- Easy touch exit push button 12‑40 VDC.
- Totally weatherproof.
- Solid state/no moving parts.
- Pressure sensitive.
950HP4/6
- 4-1/2” or 6” round.
- Ideal for Request-To-Exit (REX) applications.
- Stainless steel faceplate.
Mounting - Button Type
- Wall - Beige with Embossed Key
- Gang - Blank Blue Mushroom Button
- Narrow Stile - Blank Blue Mushroom Button
- Gang - Red “Push to Exit”
- Gang - Red Embossed “Exit”
- Narrow Stile - Red Embossed “Exit”
- Gang - 4” Stainless Embossed Handicap
- Junction - 6” Stainless Embossed Handicap


Rosslare

Standalone Keypad & Proximity Controllers

Electronic Access Controls-Rosslare-Standalone Keypad and Proximity Controllers

OUTDOOR MULLION BACKLIT PIN/PROXIMITY STANDALONE CONTROLLER
- 500 dual code users.
- 2 x 3 amp relays.
- 2 inputs with user programmable logic.
- 2 tri-colored LED indicators.
- Fully-potted, meets IP65.
- 3 user levels and 3 modes of operation.
- Optical case and back tamper protection.
- Lockout feature on wrong entries (keypad/card tamper).
- Input voltage VDC: 12–24 VDC; 16–24 VAC.
- Max. input current 12 VDC @ 160 mA.
- Standby input current 12 VDC @ 95 mA.
- Max. read range: 3.15”
- Operating temprature: -32°C to +63°C.
- Operating humidity: 0 to 95% (non-condensing).
- Outdoor usage: Weather resistant, meets IP65.
Size: 5.33”L x 1.74”W x 1.12”D

ANTI-VANDAL METAL BUTTON PIN/PROXIMITY STANDALONE CONTROLLERS
- 500 dual code users.
- 2 x 2 amp relays.
- 3 user levels and 3 operation modes.
- Selectable PIN code length: 4–8 digits.
- Auxiliary input and auxiliary output.
- Input for Request-To-Exit (REX) button.
- 2 tri-colored LED indicators.
- Fully-potted, meets IP65.
- Optical case and back tamper protection.
- Lockout feature on wrong entries (keypad/card tamper).
- Terminal block interface for wiring.
- Max. relay current: 2A.
- Operating tempratures: -20°C to +60°C.
- Weather resistant, meets IP54.
- Size: 4.72”L x 2.8”W x 1.17”D
- Rugged metal construction.
AC Q41H
- Pin only.
- Input voltage VDC: 12–24 VDC; VAC: 12–24 VDC.
- Max. input current 12 VDC @ 100mA.
- Standby input current 12 VDC @ 40mA.
AC Q42H
- Pin/proximity.
- Input voltage VDC: 12–24 VDC; VAC: 16–24 VDC.
- Max. input current 12 VDC @ 125 mA.
- Standby input current 12 VDC @ 65 mA.
- Built-in 125 kHz RFID.
Function
- Pin Only
- Pin / Prox


Von Duprin

5100, 6100 & 6200 Electric Strikes

Electronic Access Controls-VonDuprin-5100-6100-6200 Electric Strikes

5100 MULTI-FUNCTION SERIES
- Voltage: 12 or 24 VDC continuous duty.
- Fail safe or fail secure, easily changed in less than thirty seconds.
- Includes mounting tabs & neoprene filler plate.
- 1300 lbs of holding strength.
- Keeper depth of 1⁄2”: Accommodates latches up to 5/8” throw.
- Tested to over one million cycles.
- Faceplates included: 4-7⁄8” ANSI round corner, 4-7⁄8” ANSI square corner, 7-15⁄16” long, round corner wood frame prep.
- Adjustable keeper provides a snug fit and reduces pressure from the door on the strike.

6100 & 6200 HEAVY DUTY STRIKES
- Stainless steel construction.
- Accepts 3⁄4” throw latchbolt.
- Non-handed.
- Fail secure.
- Horizontally adjustable.
- Plug connectors.
6111
- For use with rim exit devices on single doors or double doors with mullion applications.
- For hollow metal, aluminum or wood.
6112
- For use with rim exit devices on single door applications.
- For hollow metal, aluminum or wood.
6211
- Electric strike for use with mortise locks without deadbolt or cylindrical locks on single door, hollow metal frames.
FOR - VOLTAGE
- Rim Exit Devices - 12VDC Fail Secure
- Rim Exit Devices - 24VDC Fail Secure
- Rim Exit Devices - 12VDC Fail Secure
- Rim Exit Devices - 24VDC Fail Secure
- Cylindrical or Mortise - 24VDC Fail Secure