GRADE 2 SINGLE CYLINDER DEADBOLT WITH THUMBTURN - ANSI/BHMA standard: A156.5, 2001, Grade 2, UL listed, A label, 3 hours. - Deadbolt thrown or retracted by key or by turn. - Bolt automatically deadlocks when fully thrown, 1” projection. - Door thickness: 1-3/8” to 1-3/4”. - Backset: 2-3/8” - 2-3/4”. - 1-1/8” x 2-1/4” faceplate. - Non-handed. - Accepts all small format interchangeable style cores (SFIC). - Comes with less core. - Single Cylinder SFIC Deadbolt Satin Chrome. - 6 Pin Spring Cover, 100/Pkg. - A Keyway 6PIN Uncombinated Core Satin Chrome.
THUMBTURN INDICATOR LOCK - Deadbolt lock used to provide privacy. Locked from inside the room, deadbolt locks the door, and a visual “In Use” sign appears. - When bolt is retracted, message reads “Vacant”. - Emergency key opens lock from the outside when required. - Finish: Satin chrome. - Replacement Emergency Key. - Thumbturn Indicator Lock Satin Chrome.
8200 SERIES AUTOMATIC OPERATOR - Push Arm door operator with Pull Arm capability (Pull Arm option requires Pull Arm Kit). - Versatile and easily integrated into electrified openings with wireless accessories: Call us for details. - Designed to fit in low to moderate traffic applications, such as assisted living, ambulatory care, hospitality, retail, restaurant and small office where ease of use is critical. - Slim & sleek profile has a smaller footprint for clean lines and an attractive look. - Ensures smooth, convenient door opening for areas requiring easy accessible and ADA compliance. - Provides dependable performance at an affordable price point. - Aluminum powder coated steel cover. - Mounting bracket contains fastening notches to reduce parts and allow for faster and easier installation. - One-piece mounting bracket eliminates the need for end caps, reducing parts and installation time. - Non-handed motor gearbox uses mechanical controls to act as a size 3 door closer in manual operation. - Intelligent control box provides the most precise door operation and includes adjustable features for all commercial applications. - Steel aluminum finished cover makes the 8200 Series aesthetically pleasing for any application. - Push Arm Door Operator w/ Pull Arm Capability Options: Replacement Push Arm — Pull Arm Kit (Pull Arm with Track).
Standard Features That You Can Use To Customize Every Opening: - Smart Latch: Senses and overcomes external pressure conditions with a graduated energy assist for secure latching. - Push’n’Go: Selectable feature allows door to open automatically as soon as it feels pressure. - Open Position Learning: Automatically sets the opening position to eliminate wall and door damage. - Obstacle Obstruction Detection: Safety feature stops and reverses door direction when distress or an obstruction is sensed. - Pre-Load Strike Assist: Removes load on strike lip with a one second delay allowing the door to release and automatically open. - LED Light Illumination: Light illumination on control box signals accurate installation and helps with connection diagnostics. - On Board Power Supply (12 VAC): Powers accessories and actuators, power supply may be required for a separate locking device.
Adjustable Features: - Hold-open time delay; 0-15 seconds. - Backcheck position. - Backcheck speed. - Opening/closing speed.
Specifications: - Electro-hydraulic single door operation. - Surface top jamb mount. - Header length: 26”. - Reduced force. - Low energy. - Cycle tested - 1 million gear box. - Electric strike replay included. - Non-handed. - Max door weight: 200 pounds. - Stocked with Push Arm.
GRADE 1 DOOR CLOSERS - ANSI/BHMA A156.4, Grade 1 certified. - UL10C approved all weather fluid, UBC 7-2 (1997) fire test. - Closer mounts hinge side, top jamb or parallel arm. - Single piece cast aluminum body. - 1-3/8” diameter piston. - Staked valves. - Separate adjustable general speed, latch speed and backcheck. - Heat-treated steel pinion. - Universal screw pack. - Suitable for interior doors from 30” to 54” wide and exterior doors up to 42” wide. - For hinge side, top jamb or parallel arm applications. - Single piece cast aluminum body with adjustable speed, latch speed & backcheck. - Fits standard Norton 9-1/16” hole spacing. - Non-handed.
GRADE 1 SLIM DOOR CLOSERS - Meets ANSI A117.1. - ANSI/BHMA A156.4, grade 1. - 1-1⁄4“ diameter piston. - Closer mounts hinge side, top jamb or parallel arm. - Single piece cast aluminum body. - Non-handed for left or right swinging doors. - Separate adjustable general speed, latch speed and backcheck. - Heat-treated steel piston. - Heat-treated pinion. - Universal screw pack for aluminum, hollow metal, and wood doors. - Non-handed.
LIGHT DUTY INTERIOR DOOR CLOSER - ANSI A156.4, Grade 3. - UL10C approved all weather fluid, UBC 7-2 (1997) fire test. - Closer mounts hinges side, top jamb or parallel arm. - Single piece cast aluminum body. - Separate adjustable general speed and latch speed & backcheck. - Heat-treated steel piston. - Heat-treated pinion. - Handicap compliant. - No backcheck. - Non-handed.