Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

LCN Products

LCN Door closers for commercial doors.
Back To Main Catagories

LCN

1260 Series Adjustable & 1460 Series Commercial Closers

1260 SERIES MODERATE TRAFFIC ADJUSTABLE CLOSERS
- The 1260 series combines the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with dual mounting capability.
- Adjustable from size 1 to 5 for interior doors up to 4’6” doors and exterior doors up to 3’6” doors.
- Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors.
- Aluminum powder coat finish.
- Cast iron cylinder.
- Peel and stick template.
- Hold Open, Standard or Slim Plastic.

1460 SERIES COMMERCIAL & INSTITUTIONAL CLOSERS
- Designed for maximum versatility, the 1460 can be used for both commercial and institutional applications.
- This fully universal closer offers a wide variety of options and fast and accurate installation.
- Adjustable from size 1 to 6 for interior 5’ doors and up to 4’ for exterior doors.
- Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors.
- Powder coat finish.
- Supplied with slim line cover.

1461RW/PA DEL TBSRT ALUM - Delayed Action
- Delays closing from 120° to 70°.
- Delay time adjustable up to approximately 1 minute.
- Standard, Cush or Hold Open.


LCN

3133 Series Concealed, 4010 Series Pull Side
& 4020 Series Push Side Closers

3133 SERIES CONCEALED DOOR CLOSERS
- Designed to mount in a 1-3/4” interior door
- The single lever arm and roller assembly provides complete concealment and the choice of finishes and track functions meet virtually all architectural requirements.
- Standard 3130 series closer shipped with standard arm, standard track and wood and machine screw pack.
- Sized cylinders for interior doors to 3’2”.
- Handed for right or left swinging doors.
- Closers to meet ADA requirements.
- Standard or optional custom powder coated finish.
- Optional plated finish on arm and fasteners.
- Optional SRI primer for installations in corrosive conditions.
- Consult factory for installation with pivots.
- Left or Right Hand.

4010 SERIES SMOOTHEE® HINGE (PULL SIDE) MOUNTING CLOSERS
- The best performing heavy duty closer for institutional and other high traffic applications.
- Adjustable from size 1 to 5 for interior doors up to 4’6” and exterior doors from size 3 to 5 up to 3’6”.
- Closer mounts hinge side, specify left or right swing doors.
- All weather fluid.
- Peel and stick template.
- Cast iron cylinder meets ADA requirements.
- Capable of ten million cycles.
- Forged steel main arm.
- Double heat treated steel pinion.
- ANSI standard A156.4 Grade 1 certified.
- UL listed for self-closing doors without hold-open.
- Left or Right Hand.

4020 SERIES SMOOTHEE® TOP JAMB (PUSH SIDE) MOUNTING CLOSERS
- The best performing heavy duty closer for institutional and other high traffic applications.
- Adjustable from size 1 to 5 for interior doors to 4’6” and exterior doors to 3’6”.
- Closer mounts top jamb (push side), specify right or left swinging door.
- All weather fluid.
- Peel and stick template.
- Cast iron cylinder meets ADA requirements.
- Capable of ten million cycles.
- Forged steel main arm.
- Double heat treated steel pinion.
- ANSI standard A156.4 Grade 1 certified.
- UL and cUL listed with regular or fusible link arms for self-closing doors.
- Left or Right Hand.


LCN

4030 Series Universal & 4040 SE Series Sentronic Closers

4030 SERIES CAST IRON UNIVERSAL CLOSER
- A cast iron, universal closer designed specifically for doors in moderate traffic conditions.
- Standard new 4030 series closer is shipped with forged regular arm, metal cover and wood/self-tapping machine screw pack.
- Non-sized 4031 cylinder is adjustable from sizes 1 to 4 for exterior doors to 36” (914mm) and interior doors to 48” (1219mm).
- Closer mounts hinge side, top jamb, and parallel arm, on either right or left swinging doors.
- Closer meets ADA requirements.
- Cast Iron.
- Forged steel main arm.
- Heat treated steel pinion.
- All weather fluid reduces seasonal adjustments.
- UL and cUL listed for self-closing doors without hold-open.
- ANSI Standard A156.4, grade 1 certified.

4040SE SENTRONIC® CLOSERS
- Provides single point hold-open for fire and smoke barrier doors.
- Door is held open until current interruption releases the holding mechanism and the door closes.
- Single lever track arm closer is specifically designed for interior doors.
- Available 24VDC or 120VAC.
- Non-sized for interior doors up to 4’0”.
- Hold-open force is adjustable between 85° to 110° in approximately 3° increments (push side) and maximum to 95° (pull side).
- Momentary on/off switch board assembly for testing door release also provides over-voltage protection.
- Functions as a full rack and pinion closer when hold-open is not engaged or current is interrupted.
- Closer mounts on either push or pull side of the door.
- Interfaces with fire alarm systems.
- UL listed for smoke barrier or labeled fire doors.
- cUL listed for self-closing doors without hold-open.
- Tested and certified under ANSI Standard A156.15.
- Conforms to life safety code, NFPA 101.


LCN

Heavy Duty 4040XP Series Mounting Brackets

4040XP SERIES ADJUSTABLE CLOSER
- 4040XP DELRW/PA TBSRT - Delayed Action
- Delays closing from 120° to 70°.
- Delay time adjustable up to approximately 1 minute.
- The smoothest durable heavy duty, double lever arm closer for the most demanding, high use and abuse applications.
- Strongest pinion at 3/4” journal diameter, widest bearing at 5/8”, stronger pinion teeth, V-shield™ seal with 20% longer life than conventional seals, 44% increased bearing load capacity.
- Adjustable from size 1 to 6 for interior doors up to 5’0” and exterior doors up to 4’0” using the Fast™ power adjust feature.
- Closer mounts hinge side, top jamb, and parallel arm.
- Cast iron cylinder.
- Non-handed.
- Meet handicap standards for reduced opening force.
- Capable of ten million cycles.
- Cast iron forged steel arm.
- Double heat treated steel pinion.
- All weather fluid.
- Powder coat finish.
- Cush, Standard, Extra Duty, Hold Open, Hold Open Cush, Spring Cush, Hold Open Spring Cush.

4040 MOUNTING BRACKETS 4040 18
- Required for hinge side mount where top rail is less than 3-3/4”. 4040 18G
- Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition.
- Plate requires 1-3/4” minimum head frame. 4040 18PA
- Required for parallel arm mounting where top rail is less than 5-1/2” measured from the stop.
- Plate requires 2” minimum top rail. 4040 18TJ
- Centers top jamb mounted closer vertically on head frame where face is less than 3-1/2”.
- Plate requires 1-3/4” minimum head frame.
- Drop Plate, Flush Drop Plate, Parallel Arm Plate, Top Jamb Plate.


LCN

4040XP Arm Options & 4110 Series Push Side Closer

4040XP SERIES ARM OPTIONS Standard (Regular) Arm
- Non-handed arm mounts pull side or top jamb with shallow reveal. Cush Arm
- Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. Spring Cush Arm
- Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.
EDA - Extra Duty Arm
- Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations.
H - Hold Open Arm
- Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold open, adjustable shoe.
Hold Open cush
- Provides hold-open function with templated stop/hold-open points.
- Handle controls hold-open function.
Hold Open Spring Cush
- Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.
- Handle controls hold-open function.
- 4040 79 - Rod & Shoe.
- 4040 79LR - Long Rod & Shoe.
- 4040 3077 - Standard Arm.
- 4040 3049 - Hold Open Arm.
- Spring Cush Arm, EDA Arm, Cush Arm, Hold Open Cush, Hold Open Spring Cush.

4110 SERIES SMOOTHEE® (PUSH SIDE) ADJUSTABLE CLOSERS
- The best performing heavy duty closer for institutional and other high traffic applications.
- 4111 is adjustable from size 2 to 5 for interior 5’ doors and exterior from size 3 to 5 for up to 4’ doors.
- 4114 is for exterior doors 30-36”, and interior doors 38-48”.
- Closer mounts parallel arm, select right or left.
- All weather fluid reduces seasonal adjustments.
- Aluminum powder coat finish.
- Cast iron cylinder.
- Meets handicap standards for reduced opening force.
- Peel and stick template.
- Capable of ten million cycles.
- Forged steel arm.
- Double heat treated steel pinion.
- Extra Duty LH/RH.
- Adjustable Hold Open Cush LH/RH.
- Adjustable Spring Cush LH/RH.


LCN

Auto Equalizer Pneumatic & Benchmark Low Energy Operators

4822 SERIES AUTO EQUALIZER™ PNEUMATIC OPERATOR
- This low energy automatic operator provides easy access for people with disabilities, the elderly, or the frail.
- Designed primarily for manual opening applications that occasionally require automatic opening.
- Size 2 push side pneumatic auto equalizer.
- Packed with thru bolts, wood & machine screws.
- Ideal for multi-door applications since cost per door leaf decrease significantly as the number of door leaves increases.
- Utilizes a 10,000,000 cycle heavy duty door closer.
- Quiet, efficient & reliable.
- Requires control boxes with integral compressor or control box using auxiliary air supply.
- No guard rails/safety mats required.
- Meets ADA requirements (power mode).
- Non-sized cylinders for interior doors to 4’6” and exterior doors to 3’6”.
- Non-handed.
- UL listed 228 and meets the provisions of ANSI Standards A117.1, A156.19, and the Americans with Disabilities Act.
- Reveal of 4-1/2” allows up to 90° power opening and 100° manual opening.
- Head frame minimum: 1-3/4”.
- Top rail minimum: 1-3/4”.
- Push Side.

9130 SERIES BENCHMARK LOW ENERGY OPERATOR
- Non-handed for either right or left swinging door.
- Designed primarily for automatic opening applications that occasionally require manual opening.
- Operator is shipped with motor gearbox, control box, mounting plate, standard arm, metal cover, standard track, wood and machine screws.
- On/Off switch included as standard.
- 36” cover is standard.
- Fits doors 30” to 36” width.
- All potentiometers clearly labeled with their functions.
- LED lights indicate power to control box and motor gearbox.
- Push-‘n-go permits non-switch activation.
- Tested internally to over 3,000,000 cycles.
- Power Boost allows for increased closing force near latch position.
- 9-3/4” for optional long arm; reveal should not exceed 1/8” on pull installations.
- Head frame minimum 2”.
- Top rail minimum 2” - flush ceiling installation requires 5-1/4” minimum.
- Opening and closing time are variable by adjustments to the electronic control module located on the operator assembly - maximum hold open time adjustable up to approximately 30 seconds.
- Template allows 90° power opening and 90° manual opening.
- Pull Side.