Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

LSDA Products

LCN Door closers for commercial doors.
Back To Main Catagories

LSDA

Mortise Locks

MLF SERIES MORTISE LOCKS
- LSDA mortise locks provide exceptional strength and durability to any door.
- Typically used in hospitals, schools and commercial buildings, they are well-suited to heavy use environments. Designed to fit standard Type 86 full-mortise cutouts, and equipped with an escutcheon trim, these locks are excellent for new projects and retrofit. The lever trim meets ADA standards for accessibility. Several functions are available, some with integral deadbolt. Mortise locks offer functions that cannot be obtained using cylindrical “key-in-knob” locksets.
- ANSI/BHMA: A156.13 2005 Series 1000, Grade 1.
- UL10C; UBC 7-2-1997.
- Heavy-duty full-case mortise lock.
- Oversize escutcheons, ideal for retrofit.
- Individual lever return springs prevent sagging.
- UL listed for 3-Hour fire doors.
- Supplied with SC4 1-1/4” mortise cylinder.
- Cylinders used for this mortise lock must be 1-1/4” length mortise cylinder.
- Deadbolt: 1” bolt projection.
- Latch: 3/4” projection.
- Supplied with a mortise cylinder except passage and privacy functions locks.
- Door thickness: 1-3/4”.
- Door preparation: Full mortise, see template.
- Escutcheons: 2-1/2” W x 8-1/4” H.
- “Quick Change” Handing: Field reversible.
- Strike: 4-7/8” x 1-1/4”.
- Backset: 2-3/4”.
- Construction: Forged brass levers and escutcheons, zinc chromate steel case, brass latchbolts.
- Style: Ann Arbor.
- Finish: Satin Chrome.

MLF01 - Passage:
- Latch retracted by lever on either side.
MLF04 - Entrance:
- Lock or unlock outside lever using rocker on edge of lock. When locked, inside lever retracts latch, outside access by key.
MLF05 - Classroom:
- Lock or unlock outside lever by key on outside of the door. When locked, inside lever retracts latch.
MLF07 - Storeroom:
- Inside lever always retracts latch. Outside lever never retracts latch, outside key retracts latch.
MLF12 - Apartment/Dormitory/Exit With Rocker:
- Latch is retracted by either lever unless outside lever is locked by rocker. In addition, a deadbolt can be projected or retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt, while outside lever remains locked.
MLF13 - Apartment/Dormitory/Exit Without Rocker:
- Both levers always retract latch. Deadbolt can be projected and retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt.
MLF19 - Privacy:
- Both levers always retract latch. Deadbolt can be projected and retracted by thumbturn inside or emergency release outside. Also, operating inside lever retracts latch and deadbolt.
MLF48 - Storeroom with Deadbolt:
- Inside lever always retracts latch, and deadbolt if it is extended. Outside lever is rigid, outside cylinder retracts latch, and deadbolt if it is extended. Deadbolt is extended or retracted by inside thumbturn or by outside cylinder.

Functions:
Passage - Entrance - Classroom - Storeroom - Apartment/Domitory/Exit Lock with Rocker - Apartment/Domitory/Exit Lock No Rocker - Privacy - Storeroom with Deadbolt.

Accessories:
- Spindle Kit for MLF Mortise Locks.
- Spring Cage for MLF Mortise Locks.


LSDA

Grade 1 Extra Heavy Duty Leverset

LF SERIES LEVERSETS
- ANSI/BHMA A156.2 series 4000, Grade 1 certified.
- Latch: Solid brass 1/2” throw, reversible for RH or LH applications.
- UL/cUL listed for fire rated openings.
- Roses are wrought brass or bronze.
- Backset: 2-3/4”, 2-3/8” available.
- Faceplate adjustable for flat or beveled doors 2-1/4" x 1-1/8".
- Door: Adjustable from 1-3/8” to 2”.
- Strike: 4-7/8" x 1-1/8" ASA.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Case: Corrosion treated heavy gauge, cold-rolled, steel mechanisms.
- Rose: 3-1/2” diameter.
- Lever length: 5-1/4” long.
IC Core Option:
Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best. Core not included.

LF2000 – Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts latch.
LF2100 – Passage:
- Both levers always retract latch.
LF2200 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts latch.
LF2400 – Storeroom:
- Outside lever never retracts latch. Entrance by key only. Inside lever always retracts latch.
LF2500 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder.
- The inside lever always retracts the latch.
LF2800 – Classroom Intruder:
- Outside and inside cylinders lock outside lever. Inside lever always retracts the latch.
LF2900 – Institutional:
- Neither lever retracts the latch. A key is required in both the inside and outside cylinder to retract the latch.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

Functions:
Entrance - Privacy - Passage - Storeroom - Classroom - Classroom Intruder - Institutional.


LSDA

Grade 1 Heavy Duty Leversets

5000 SERIES LEVERSETS
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- Vandal resistant clutch models available.
- Non-handed.
- Latchbolt: 2-3/4” backset, UL listed 3 hr fire rated.
- Door thickness: 1-9/16” to 2-1/8”.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
5000 - Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
C5000 – Entrance/Office with Clutch:
- Same operation as 5000.
5100 – Passage:
- Both levers always retract the latch.
5200 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
5400 – Storeroom:
- Outside lever never retracts the latch. Entrance by key only. Inside
- lever always retracts the latch.
C5400 – Storeroom with Clutch:
- Same operation as 5400.
5500 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.

Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

IC Core Option:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).

Functions:
Entrance - Passage - Privacy - Storeroom - Classroom


LSDA

Grade 1 Heavy Duty Knobsets

4000 SERIES KNOBSETS
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- UL listed 3 hour fire rated, 10C/UBC 7-2 positive pressure.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Latchbolt: 2-3/4 backset, UL listed, 2-3/8” UL listed latch available.
- Door thickness: 1-3/8” to 2”.
- Non-handed.
4000 – Entrance/Office:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.
4100 – Passage:
- Both knobs always retract the latch.
4200 – Privacy:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.
4400 – Storeroom:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.
4500 – Classroom:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.

IC Core Option:
- Accepts small format IC Cores from KSP, Kaba
- Peaks, Falcon & Best (Core not included).

Functions:
Entrance - Privacy - Passage - Storeroom - Classroom - Institutional


LSDA

Grade 1 & Grade 2 Latches & Accessories

GRADE 1 LATCHES & ACCESSORIES
5LINK
- Use in conjunction with a 2-3/4” latch to achieve 5” backset.
LFTDP
- Includes outside rose, rose liner & inside rose to adapt a LF series lever for a 2-1/4” door.
Deadlatch
- UL 2-3/4” 3.
- UL 2-3/4” 32D.
- UL 2-3/8” 26D.
Spring Latch
- UL 2-3/4” 32D.
Extension Latch
- 5”.
IC Replacement Yokes
- All Except LFC2000IC.
LFC2000IC
- Thick Door Package for LF Series.

GRADE 2 LATCHES, EXTENSION LINK & CYLINDER
KEL5
- Use in conjunction with 2-3/4” latch to achieve 5” backset. Dead Latches
- Drive-In 2-3/8” 32D.
- Drive-In 2-3/4" 32D.
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 3.
- UL 2-3/4" 32D.
Spring Latches
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 32D.
Extension Link
- 5”.
Cylinder
- SC1 26D.


LSDA

Grade 2 Commercial Duty Leversets

800 SERIES “VANCOUVER” LEVERSETS
- ANSI/BHMA A156.2-2003, series 4000 Grade certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Vancouver design: Two-step rose.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.
800 – Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
C800 - Entrance/Office with Clutch:
- Same operation as 800.
810 – Passage:
- Both levers always retract the latch.
820 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
830 - Exit:
- Lever inside, always retracts latch. Blank plate outside.
840 – Storeroom:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.
C840 - Storeroom with Clutch:
- Same operation as 840.
850 – Classroom:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.
C850 - Classroom with Clutch:
- Same operation as 850
870 - Communicating:
- Key in either lever locks or unlocks that lever.
890 - Institutional:
- Both levers always rigid. Key in either lever retracts latch.
IC Core Option:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).
Functions:
Entrance - Privacy - Passage - Exit - Storeroom - Classroom - Communicating - Institutional.


LSDA

Grade 2 Commercial Duty Leversets 800 Series

800 SERIES “EDMONTON” & “CALGARY” LEVERSETS
- ANSI/BHMA A156.2-2003, series 4000 Grade 2 certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Edmonton design: Flat-face rose.
- Calgary design: Flat-face rose with curved lever.
C800 - Entrance/Office with Clutch:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.
810 – Passage:
- Both levers always retract the latch.
820 – Privacy:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.
C840 - Storeroom with Clutch:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.
C850 – Classroom with Clutch:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.
Benefits of a “Clutch” Lever:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.

Functions:
Edmonton Style: Entrance - Passage - Privacy - Storeroom.
Calgary Style: Entrance - Passage - Privacy - Storeroom - Classroom.


LSDA

Grade 2 Commercial Duty Knobsets 100B Series

100B SERIES KNOBSETS
- ANSI/BHMA A156.2 series 4000, Grade 2 certified.
- UL/cUL listed for fire rated openings.
- Cylindrical lock housing made of cold rolled steel mechanisms, zinc dichromated for corrosion resistance.
- Strike: 4-7/8”x 1-1/4”.
- Door: Adjustable from 1-3/8” to 1-3/4”.
- Backset: 2-3/4”, 2-3/8” available.
- Cylinder: Supplied with rekeyable SC4 6 pin keyway standard, IC Core option accepts 6 or 7 pin Best® style cores, *WR5 rekeyable 6 pin , keyed 5 pin, accepts pins up to WR size 7.
- *WR5 - For master key system, please purchase locks less cylinder and add Ilco 15995WE26D OB cylinder.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
100 – Entrance/Office:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.
110 – Passage:
- Both knobs always retract the latch.
120 – Privacy:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.
130 - Exit Lock:
- Knob Inside, blank plate outside.
140 – Storeroom:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.
150 – Classroom:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.
190 - Institutional:
- Both levers fixed. Entrance by key in either side.


LSDA

Grade 2 Commercial Deadbolts & Accessories

220 SERIES DEADBOLT
- Massive 1” cUL throw adjustable backset bolt with hardened steel rod to resist sawing.
- Strike: 2-3⁄4” x 1-1⁄8” reinforced type faceplate with two 3” long screws, plus standard 4-7⁄8” x 1-1⁄4”ASA strike for metal jambs.
- Removable solid brass 6 pin cylinder with keyed 5 pin standard, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Accepts many after market & high security cylinders.
- Rotating collar with inserts that resist wrenching.
- All metal construction.
- All exposed components are brass or stainless steel.
- ANSI/BHMA A 156.2 series 4000, Grade 2 certified.
- UL/cUL listed, safety standards listed for 3 hour doors.
- For a wide variety of keyways other than the stocked SC1 or WR3 keyways, please see our LSDA C500 & Ilco 15995 Universal Cylinders.

220 SERIES ADJUSTABLE BOLTS & THICK DOOR PACKAGE
- 2-1/4” Thick Door Package.
- Adjustable 2-3/8” to 2-3/4” Bolt for Series 220 & 225.


LSDA

Grade 3 Tubular Leversets

50 SERIES TUBULAR LEVERSETS
- Adjustable 2-3/8”or 2-3/4” backset.
- Full 1/2” latch projection.
- ANSI/BHMA A156.2, series 4000 Grade 3 compliant.
- 1-3/8” to 1-3/4” door thickness.
- Levers and roses are stainless steel or brass.
- Mechanism is constructed of steel.
- Auto-unlocking inside levers.
- Concealed mounting screws.
- Latch retracts with only 45° rotation.
- All keyed levers are stocked WR3 keyway.
- Replacement SC1 keyway cylinder for 50 series “entrance function” levers. CYL50S CH, chrome finish or CYL50S BR, brass finish.
- Leversets in Entrance, Passage, Privacy & Dummy.


LSDA

Grade 3 Cylindrical Locksets

10 SERIES CYLINDRICAL LOCKSETS
- Built on a cylindrical lock chassis using high quality brass & steel.
- 5 pin solid brass cylinder.
- Adjustable 2-3/8" to 2-3/4" universal latch.
- 2-3/8" and 2-3/4" drive-in latches are available.
- Full 1/2" projecting deadlatch.
- Adjustable 1-3/8" to 1-3/4" door thickness.
- * MB11B3 RFL is drive-in whereas all others have standard latches.
- Keyways in WR3 & SC1
- Cylindrical Locksets in Entrance, Passage, Privacy & Storeroom.


LSDA

Grade 3 Tubular Knobsets & Accessories

00 SERIES TUBULAR KNOBSETS
- Residential locksets with tubular mechanism.
- Adjustable 2-3/8” or 2-3/4” backset; Full 1/2” latch projection.
- “4-Way” latches can be used for standard or drive-in installations.
- ANSI/BHMA A156.2 series 4000, Grade 3 compliant.
- 1-3/8” to 1-3/4” door thickness.
- Knobs and roses are stainless steel or brass.
- Mechanism is constructed of steel.
- 00 & 02 knobs: Automatically unlock when the inside knob is rotated.
Style - Keyway - Finish
Entrance:
- Ball - WR3 - Polished Brass
- Ball - WR3 - Satin Stainless
- Tulip - WR3 - Polished Brass
- Tulip - WR3 - Satin Chrome
- Tulip - WR3 - Split
Passage:
- Ball — Polished Brass
- Ball — Satin Stainless
- Tulip — Polished Brass
- Tulip — Satin Chrome
- Tulip — Split
Privacy:
- Ball — Polished Brass
- Ball — Satin Stainless
- Tulip — Split

GRADE 3 REPLACEMENT LATCHES
Backset - Finish - Drive-In - Latch Type
For Series 00, 50
- 2-3/8 & 2-3/4” - Polished Brass - Yes - 4 Way Dead
For Series 10, 14
- 2-3/4” - Satin Stainless - Yes - Dead
- 2-3/8 & 2-3/4” - Polished Brass — Dead
- 2-3/8 & 2-3/4” - Satin Stainless — Dead
For Series 11, 12
- 2-3/4” - Satin Stainless - Yes - Spring
- 2-3/8 & 2-3/4” - Polished Brass — Spring
- 2-3/8 & 2-3/4” - Satin Stainless — Spring
For Series 01, 40, 51 & 52
- 2-3/8” - Polished Brass — Spring
- 2-3/8 & 2-3/4” - Polished Brass — Spring
- 2-3/8 & 2-3/4” - Polished Brass Yes - 4 Way Spring


LSDA

Grade 3 Residential Solid Cylinder Deadbolts

Residential Deadbolts-LSDA Grade3 Residential Solid Cylinder Deadbolts

20 SERIES SOLID CYLINDER DEADBOLTS
20
- Full 1" throw deadbolt with hardened steel rod insert.
- 5 pin tumbler solid brass cylinder.
- Revolving cylinder collar resists any attempt at twist-off.
- Solid brass one piece cylinder housing.
- Door thickness adjustable for door 1-3/8" to 1-3/4".
- UL adjustable bolt 2-3/8" or 2-3/4" backset.
20MB3W ADJ DI KA4
- Drive-in whereas all others have standard bolts.
22 3 Spin to Lock
- Spin to lock function by spinning outside cylinder collar.
- Outside locking by key.
- Blocker button inside prevents access by key from outside when button is engaged.
Single Cylinder (20)
KW1 - SC1 - WR3.
Double Cylinder (20MB3W ADJ DI KA4)
WR3 - SC1.
Spin to Lock (22 3)
WR3.
Thumbturn Bolt (26 32D)


LSDA

Grade 3 Removable Cylinder Deadbolts & Accessories

Residential Deadbolts-LSDA-Grade3 20R Series Removable Cylinder Deadbolts and Accessories

20R SERIES REMOVABLE CYLINDER DEADBOLT
- Full 1" throw bolt with hardened steel rod insert.
- Revolving cylinder collar resists any attempt at twist-off.
- Door thickness adjustable for door 1-3/8" to 1-3/4".
- UL adjustable bolt 2-3/8" or 2-3/4" backset.
- Removable solid brass 6 pin cylinder (pinned 5) standard.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- For a wide variety of keyways other than the stocked SC1 or WR3 keyway, please see our LSDA C500 & Ilco 15995 Universal Cylinders.
Single Cylinder with Fixed Faceplate Bolt
SC1 - WR3.
Single Cylinder with Drive-In Bolt
SC1 - WR3.
Double Cylinder with Fixed Faceplate Bolt
WR3 - SC1.

GRADE 3 BOLTS, THICK DOOR PACKAGES, STRIKES & CYLINDER CAP REMOVAL TOOL
Adjustable 2-3/8” or 2-3/4” Bolt
Drive-In - Standard
2-1/4” Thick Door Package
20 & 20R - 25 & 25R
2-3/4” x 1-1/8” Strike
All
Cylinder Cap Removal Tool
2-In-1 (12 Teeth & 14 Teeth) Cap Tool 20 & 25


LSDA

Grade 3 Entrance Gripsets

Residential Deadbolts-LSDA Grade3 Entrance Gripsets

40 SERIES ENTRANCE GRIPSETS
- ANSI/BHMA: A156.2, series 4000 Grade 3 compliant.
- Door thickness: 1-3/8” to 1-3/4”.
- 1” throw bolt with hardened steel anti-saw rod.
- Backset: Adjustable 2-3/8” or 2-3/4”.
- Strikes: 2-1/4” full lip.
- Handing: Non-handed.
- Cylinder: Supplied with KW1, SC1 or WR5 rekeyable 5 pin cylinder, Optional SC1 cylinder available.
- Revolving cylinder collar.
- Reinforced with hardened anti-saw rod.
- Door preparation: 2-1/8” diameter bore x 1” crossbore.
- Key locking outside, turnbutton locking inside.
40 Series
- Centre to centre: Early American & Park Avenue: 8-5/8”.
41 Series
- Dummy for inactive leaf of double doors.
46 Series: Jumbo Gripset
- Centre to centre: 9-11/16”.
- 2-1/8” bore required for deadbolt.
Optional Interior Levers for 40 Series
- Handing: LH or RH.
40 Series Gripset
Early American - Park Avenue - Early American.
46 Series Jumbo Gripset
Metropolitan - Plantation.


LSDA

40 & 46 Series Gripset Accessories

Residential Deadbolts-LSDA 40 Series and 46 Series Gripset Accessories

OPTIONAL SC1 KEYWAY CYLINDERS FOR 40 & 46 SERIES
Optional SC1 Keyway Cylinder
Venetian Bronze SC1 - Satin Nickel SC1 - Millennium Brass SC1

OPTIONAL INTERIOR LEVERS FOR 40 & 46 SERIES
Optional Interior Lever Trims
Venetian Bronze Left/Right - Satin Nickel Left/Right - Millennium Brass Left/Right.


LSDA

Electronic Keypad Deadbolts & Radio Frequency Remote Control

Residential Deadbolts-LSDA Electronic Keypad Deadbolts and Radio Frequency Remote Control

EL730 SERIES KEYPAD DEADBOLTS WITH OPTIONAL REMOTE CONTROL
- UL listed for 2hr fire doors.
- Weather resistant.
- Electronic deadbolts with mechanical key override.
- Optional auto-locking/relocking adjustable 10 to 90 seconds.
- Optional single use codes.
- Optional dual-authorization mode.
- Digital keypad with up to 10 different codes possible.
- Temporary lock-out all user codes.
- Optional “keypad mute” mode for quiet environment.
- Non-handed.
- Automatically detects and sets bolt direction.
- 1” deadbolt projection.
- Adjustable 2-3/8” or 2-3/4” backset.
- Door thickness: 1-3/8” to 2”.
- Door preparation: 1-1/2” or 2-1/8” diameter bore x 1” crossbore.
- Comes with SC1 keyway, drilled for 6, pinned to 5.
- Uses 4 “AA” batteries (not supplied).
- 5,000 operational battery life.
- Can be programmed to work with up to 10 radio frequency remote controls.
- Key-ring remotes do not require line of site and maintain security with 8 million.
- unique codes without accidental overlap.
EL730SLR: Remote Control Optional
-Replacement of EL710S & EL730S.
-Optional remote control sold separately.

OPTIONAL EL730 SERIES RADIO FREQUENCY REMOTE CONTROL
- Each lock supports up to 10 remote controls
- It is easy to add or delete remote controls by entering the correct programming sequence into the keypad.
- In case of loss of remote control, you can delete all remote controls and reprogram the remote controls that were not lost or new additions.
- No need to delete all remote control when disabling one remote control
- All EL 730 optional remote controls use the same frequency, however, each remote control has a unique digital code that only those that are specifically programmed into each lock can open the lock.
- When “Masterkey System” is required, one remote control can be enrolled into every lock making it a “master” remote control, then each lock can be programmed to have one to nine additional remote controls.
- Alternative to this “Masterkey System” is to key all the mechanical cylinders the same and use a mechanical “master” key where it’s needed.
- 8 million unique transmitter codes without accidental overlap
- Radio Frequency Remote Control


LSDA

Electronic Keypad Deadbolts With Smart Cards & Deadlatch Levers

Res Pushbutton Entry-LSDA-Electronic Keypad Deadbolts with Smart Cards and Deadlatch Levers

EL740 SERIES KEYPAD DEADBOLTS WITH PROXIMITY SMART CARDS
- UL listed for 2hr fire doors.
- Weather resistant.
- Electronic deadbolts with mechanical key override.
- Optional auto-locking/relocking adjustable 10 to 90 seconds.
- Optional single use codes.
- Optional dual-authorization mode.
- Digital keypad with up to 10 different codes possible.
- Temporary lock-out all user codes.
- Optional “keypad mute” mode for quiet environment.
- Non-handed.
- Automatically detects and sets bolt direction.
- 1” deadbolt projection.
- Adjustable 2-3/8” or 2-3/4” backset.
- Door thickness: 1-3/8” to 2”.
- Door preparation: 1-1/2” or 2-1/8” diameter bore x 1” crossbore.
- Comes with SC1 keyway, drilled for 6, pinned to 5.
- Uses 4 “AA” batteries (not supplied).
- 5,000 operational battery life.
- Can be programmed to work with up to 10 RFID Smart Cards (Comes with 2 cards).
- Works with any MiFare proximity cards, including many Transit Passes and Credit Cards.
Notable MiFare Smart Cards in Public Transportation System:
- Presto Card™: (Hamilton/Ottawa/Toronto, ON)
- Compass Card™: (Greater Vancouver, BC)
- ETS Blue™: (Edmonton, AB)
- OPUS Card™: (Montreal, QC)
- M-Card™: (St. John’s, NL)
- MiFare cards are also used in office buildings with access control systems.
Description:
- Venetian Bronze
- Satin Nickel
- Millennium Brass
- Extra RFID Smart Card

EL750 SERIES KEYPAD DEADLATCH LEVERS
- Comes with SC1 keyway, drilled for 6 pin to 5.
- Conventional key-in-knobs cylinders will not work
- Adjustable 2-3/4” or 2-3/8” backset
- Handing: Field reversible
- Door preparation: 1-1/2” to 2-1/8” diameter bore x 1” crossbore
- Door thickness: 1-3/8” to 2”
- Uses 4 “AA” batteries (not supplied)
- Weather resistant
- Temporary lock-out all user codes
- Optional “keypad mute” mode for quiet environment
- 90 min fire-rated
- 50,000 operation battery life
- Up to 100 user codes
- Auto relock adjustable from 5 to 90 seconds
- Internal switch for passage mode
Description:
Lever with Keypad
- Venetian Bronze
- Satin Nickel
- Millennium Brass
Replacement Deadlatch for EL750
- Bright Brass
- Venetian Bronze
- Satin Nickel


LSDA

Aluminum-Glass Door Hardware: Bolts, Deadlatches, Deadlatch Lever
& Paddle Handles

Glass-Aluminum-LSDA-Aluminum Glass Door Hardware-Bolts-Deadlatches-Deadlatch Lever and Paddle Handles

MAXIMUM SECURITY BOLTS
- Maximum security bolt provides for excellent security even when a gap exists between the door & frame.
- Laminated bolt provides more strength than one piece design.
- Replacement for existing aluminum door flip & hook bolts.
- Case size: 7/8” x 6-13/16”
- Flip bolt: 5/8” x 1-3/8” throw for swinging doors.
- Hook bolt: 5/8” x 13/16” throw for sliding doors.
- Includes both clear & brown anodized aluminum faceplates.
- Bolt - Backset
- Hook - 1-1/8”
- Hook - 31/32”
- Flip - 1-1/8”
- Flip - 31/32”

DEADLATCHES
- Replacement for existing aluminum door latches.
- Case size: 7/8” x 6-13/16”
- Latch bolt: 5/8” x 1” x 5/8” throw.
- Deadpin prevents the latch bolt being shimmed open.
- Hold back function allows the latch to be “dogged” during store opening times.
- Simply hold latch in and turn key backwards to “dog” the latch.
- Includes both clear & brown anodized aluminum faceplates.
- Handing: “Quick Change” reversible handing - pull the latch and turn clockwise to change handing.
Backset - Hand
- 1-1/8” - Reversible
- 31/32” - Reversible

DEADLATCH LEVER HANDLES
- Works with aluminum door deadlatches such as the LSDA 4510 Series.
- Handle is designed to fit the hand and allow for minimum force to open the deadlatch.
- Reversible cam disc included.
Finish
- Aluminum
- Duranodic

DEADLATCH PADDLE HANDLES
- For aluminum door latches on both outswing and inswing doors.
- Reversible cam disc included.
- Both Push & Pull stickers included which allows for: Push to Right, Push to Left, Pull to Right or Pull to Left.
Finish
- Aluminum
- Duranodic
- Aluminum


LSDA

Solid Brass Padlocks & Accessories

Padlocks-LSDA-Solid Brass Padlocks and Accessories

PIN TUMBLER SOLID BRASS PADLOCKS
- Solid brass body, highly corrosion resistant.
- Pin tumbler cylinder with solid brass keyway.
- 2 nickel plated brass keys.
- Chrome plated hardened steel shackle.
- Double locking shackle.
- Each lock individually boxed.
- Packed 6 per box except BP200 (12).
Keyway - Case Width - Shackle Clearance - Shackle Diameter
- KD - 3/4” - 1/2” - 1/8”
- KA 600 - 3/4” - 1/2” - 1/8”
- KA 602 - 3/4” - 1/2” - 1/8”
- KD - 1-1/8” - 5/8” - 3/16”
- KA 700 - 1-1/8” - 5/8” - 3/16”
- KA 701 - 1-1/8” - 5/8” - 3/16”
- KA 702 - 1-1/8” - 5/8” - 3/16”
- KD - 1-1/2” - 7/8” - 1/4”
- KA 800 - 1-1/2” - 7/8” - 1/4”
- KA 801 - 1-1/2” - 7/8” - 1/4”
- KA 802 - 1-1/2” - 7/8” - 1/4”
- KD MK4010 - 1-1/2” - 7/8” - 1/4”
- KD - 1-1/2” - 2-1/2” - 1/4”
- KA 800 - 1-1/2” - 2-1/2” - 1/4”
- KA 801 - 1-1/2” - 2-1/2” - 1/4”
- KA 802 - 1-1/2” - 2-1/2” - 1/4”
- KD - 1-3/4” - 1-3/16” - 5/16”
- KA 850 - 1-3/4” - 1-3/16” - 5/16”
- KA 851 - 1-3/4” - 1-3/16” - 5/16”
- KA 852 - 1-3/4” - 1-3/16” - 5/16”
- KD MK4011 - 1-3/4” - 1-3/16” - 5/16”
- KA 850 - 1-3/4” - 2-1/2” - 5/16”
- KA 851 - 1-3/4” - 2-1/2” - 5/16”
- KA 852 - 1-3/4” - 2-1/2” - 5/16”
- KA 900 - 2” - 1-1/8” - 3/8”
- KA 901 - 2” - 1-1/8” - 3/8”
- KA 902 - 2” - 1-1/8” - 3/8”

KEYS
Description - Series
- Key Blank - BP200
- Key Blank - BP300
- Key Blank - BP400, BP420
- Key Blank - BP400
- Key Blank - BP500
- 4010 Master Key - BP400
- 4011 Master Key - BP450


LSDA

Look-A-Like Key Blanks & Tumbler Cam Locks

LSDA-Brass Look-A-Like Key Blanks and Tumbler Cam Locks.

BRASS LOOK-A-LIKE KEY BLANKS
- Key blanks have the look and feel of the original manufacturer’s blank.
- Solid brass.
- Tarnish resistant lacquer finish.
- Both Ilco and Curtis numbers appear on blank.
- One side left blank for stamping.
- Packed 50 per box.
Description - Original # - ILCO # Curtis #
- GM Secondary - 320405 - S1098H - B45
- GM Secondary - 320589 - S1098B - B49
- GM Primary - 320652 - P1098C - B50
- Compx Chicago - K5 - 1041T - CG16
- Dexter - 67 - D1054K - DE6
- Ford Secondary - S1167FD - S1167FD - H50
- Kwikset - 1063B - 1176 - KW1
- Schlage 5 Pin C - 35-100C - 1145 - SC1
- Schlage 6 Pin C - 35-101C - A1145 - SC4
- Schlage 6 Pin E - 35-101E - A1145E - SC9
- Weiser - 1555 - 1054WB - WR3
- Yale - 8 - 999 - Y1
- Yale - 9114 - O1122 - Y11

DISC TUMBLER CAM LOCKS
- 3/4” diameter.
- Polished nickel.
- Disc tumbler.
- 90° & 180° cam turn.
- Key removable in both locked and unlocked position.
- Compatible with CompX Fort specialty straight cams: SF2400, SF2800, SF3200, SF4000 & SF4800.
- Each Cam Lock Includes:
- Finish washer.
- Spur washer.
- 3/4” nut.
- 90° & 180° stop washer.
- Straight and offset cam.
Keway
Cylinder Length: 3/8” Maximum Thickness: 3/16”
- KA LS300
- KA LS301
- KD
Cylinder Length: 5/8” Maximum Thickness: 5/16”
- KA LS300
- KA LS301
- KD
Cylinder Length: 7/8” Maximum Thickness: 9/16”
- KA LS300
- KA LS301
- KD
Cylinder Length: 1-1/8” Maximum Thickness: 13/16”
- KA LS300
- KA LS301
- KA LS302
- KD
Cylinder Length: 1-3/8” Maximum Thickness: 1-3/16”
- KA LS300
- KA LS301
- KD


LSDA

Dummy ThumbTurns, Rim Cylinders & Mortise Cylinders

LSDA-Dummy thumbturns, rim cylinders and mortise cylinders.

DUMMY MORTISE CYLINDERS
1” Mortise Dummy Cylinders
Finish:
- Duranodi
- Satin Chrome

THUMBTURN MORTISE CYLINDERS
Mortise Thumbturn Cylinders
Length - Finish
- 1"- Bright Brass
- 1" - Duranodic
- 1" - Satin Chrome
- 1-1/4" - Bright Brass
- 1-1/4” - Duranodic
- 1-1/4” - Satin Chrome
- 1-1/8” - Satin Chrome

RIM CYLINDERS
- Horizontal or vertical tailpiece installation.
- 5 pin standard, drilled for 6 pin applications.
- Rekeyable to original manufacturer’s systems.
- Supplied with trim ring, mounting plate & connecting screws.
- Breakoff tailpiece allows for cylinders to be used for different door thicknesses.
* Composite (Comp) works with Schlage C-K & 1170C (Hollymade).
Keyway - Finish
- Arrow - Satin Chrome
- Corbin 60 - Satin Chrome
- Kwikset - Satin Chrome
- Sargent LA - Satin Chrome
- Schlage C - Bright Brass
- Schlage C - Satin Chrome
- Schlage E - Satin Chrome
- Schlage Comp* - Duranodic
- Schlage Comp* - Satin Chrome
- Weiser - Duranodic
- Weiser - Satin Chrome
- Yale 8 - Satin Chrome


LSDA

Universal Combination Cylinders & Neuter Bow Key Blanks

LSDA-Universal combination cylinders and neuter bow key blanks.

UNIVERSAL COMBINATION CYLINDERS
- Meets ANSI/BHMA A156.5 series Grade 1.
- Operates most Grade 1 & 2 locksets and leversets including Arrow D, E, F, K, Schlage B100, B400 and H Series deadlocks as well as many other locksets such as LSDA.
- One piece OEM quality tailpieces.
- Drilled 6, pinned 5 standard.
- Rekeyable to original manufacturer’s systems.
- Manufactured from solid brass.
- Screw cap fastening of the plug facilitates ease of keying.
- All stocked with 26D (Satin Chrome) plug faces.
* Composite (Comp) works with Schlage C-K & 1170C (Hollymade)
LSDA Locks That Accept These Cylinders
- LF Lever - 5000 Lever - LH Knob
- 4000 Knob - 800 Lever - 100B Knob
- 260/265 Deadbolt - 220/225 Deadbolt - 20R/25R Deadbolt
- LR/KR Exit Trim - RK450 Padlock
Keyway
- Arrow
- Corbin 60
- Kwikset
- Sargent LA
- Russwin 981
- Russwin 6D1
- Schlage C
- Schlage E
- Schlage Comp*
- Weiser
- Yale 8

NEUTER BOW KEY BLANKS
- Large head lacquered brass blanks.
- Embossed face with LSDA and “Do Not Duplicate”.
- Meets original manufacturer tolerances.
- One side plain for stamping.
* UNIDENTIFIABLE TO THE UNTRAINED EYE!
Keyway
- Sargent LA
- Weiser 1555
- Schlage 35-101C
- Schlage 35-100C
- Kwikset 1063W
- Yale 8


LSDA

Showcase Ratchet, Bolt Locks, Drawer & Sliding Door Push

LSDA Products - Showcase Ratchet Locks, Bolt Locks, Drawer & Sliding Door Push Locks.

SHOWCASE RATCHET LOCKS
- Packed with bars for both glass and 3/4” wood applications.
Keyway
- KA - LS300
- KA - LS301
- KD

VERTICAL BOLT LOCK
- For both drawers & doors.
- Packed with 2 different cams.
- Cylinder length: 3/4”
Keyway
- KA - LS300

DRAWER LOCK
- These diamond back drawer locks come complete with bolt and spring latch.
- Cylinder length: 7/8”
Keyway
- KA - LS300

SLIDING DOOR PUSH LOCKS
- This bypass lock works for sliding cabinets and drawers.
- Cylinder length: 3/4”
Keyway
- KA - LS300
- KD


LSDA

Universal Tubular Cam Locks & Mounts for Lever,
Knob, Deadbolt & Gripset

Cam-Desk Locks-LSDA-Universal Tubular Cam Locks and Mounts for Lever-Knob-Deadbolt and Gripset

UNIVERSAL TUBULAR CAM LOCKS
- For wood or metal doors and drawers where additional security is required.
- 7 pin tubular cylinder with over 100,000 unique combinations.
- Possible functions include: Key rotation at 90° or 180° right or left.
- Supplied with wood/metal washer, straight cam, and 1/8” offset cam.
- Will accept conventional square cutout cams.
Keyway
Cylinder Length: 3/8” Maximum Thickness: 1/4”
- KA56800
- KA56801
- KA56804
- KD
Cylinder Length: 5/8” Maximum Thickness: 1/2”
- KA56800
- KA56801
- KA56804
- KD
Cylinder Length: 7/8” Maximum Thickness: 3/4”
- KA56800
- KA56801
- KA56804
- KD
Cylinder Length: 1-1/8” Maximum Thickness: 1”
- KA56800
- KA56801
- KA56804
- KD
Cylinder Length: 1-1/2” Maximum Thickness: 1-1/8”
- KA56800
- KA56801
- KA56804
- KD

MOUNTS FOR LEVERS, KNOBS, DEADBOLTS & GRIPSETS
Description
- For 40 Series Gripsets
- For 46 Series Gripsets
- For G1 Levers, 1 Hole
- For G2 & G3 Levers, Knobs & Deadbolts, 2 Holes
- For G2 & G3 Levers, Knobs & Deadbolts, 3 Holes