OCTOPOD PATIO DOOR LOCK - Ideal for sliding patio doors, sliding windows, swinging doors, double doors, french doors & other applications. - Can be used on narrow stile doors and frames with a width of only 1-5/8”. - Lock housing accepts standard 1-1/8” mortise cylinder (not included) allowing it to be keyed to other locks in a system. - Mounts at top or bottom of door. - Equipped with a 3/8” diameter x 9” long locking bolt with a 2-3/8” throw standard. - Other models available by special order for Assa & Medeco cylinders and finishes other than the standard aluminum finish.
KEE BLOK LOCKOUT SHROUD - Blocks all existing keys to knob locks or padlocks in seconds. - Fits 90% of knob locks as well as many popular models of padlocks. - Compact unit is constructed of high strength aluminum alloy. - A model is also made for lever handles and is available by special order. Keyway: - KA MMC2 - KD
CROSS BORE RELOCATION DRILL GUIDE - Easy way to correct a mis-drilled cross bore or to relocate a backset from 2-3/8” to 2-3/4” or vice versa. - Remove existing lock and install the HIT-23 in the latch hole. Re-drill using a hole saw with the drill blank installed. - For both 1” and 1-1/8” face plates with a 1” diameter latch hole. - Solid steel construction.
JAMB JACKETS - Door jamb reinforcer repairs and covers damaged and split out door jambs damaged by a break-in without the expense of replacing the whole jamb. - Manufactured from sheet metal approximately 1/16” thick for 1-3/4” doors. - 1-3/8” available by special order. - Adds reinforcement to undamaged jambs for additional security. - Designed to cover standard 1/2” rabbeted jamb. - Finished in beige powdercoat for durability, may be repainted to match existing colour scheme. - Recessed to accommodate T-strike except JJE model. Length: - 24” - 36”
HOLLOW METAL DOOR BRACKETS LMB01 - For installing cylindrical knob locks or dead-bolts on hollow metal doors. - Made of 12 gauge cold rolled steel. - Supplied with adhesive template and pop rivets for convenience & accuracy. - Center cut-out for seamed doors. LMB02 - As above for mortise locksets. LMB03 - For hollow metal or aluminum door & frames (set of 2). Application - Cylindrical Knob & Deadbolt. - Standard Mortise Locks. - Metal, Aluminum Door & Frames.
“PIT BULL” LATCH EMBOSS TOOL - For latch installations on 18 & 20 gauge hollow metal steel doors, this tools creates a rectangular formed pocket at the edge of the door. - A few turns with a wrench will squeeze an indentation that will accept both 1” and 1-1/8” wide by 2-1/4” high latches. - Not for seam doors.