Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Miscellaneous Commercial Hardware

Miscellaneous Commercial Hardware
Back To Main Catagories

Gallery

Elbow Catch, Cylinder Pull, FLush Bolt & Wall Stops

Misc Commercial Hardware-Elbow Catch-Cylinder Pull-Flush Bolt-Wall Stops

CABINET ELBOW CATCH
- Made of cast brass or bronze.
- Ideal for use on the inactive leaf of cabinet doors.
- Supplied with screws.
- Catch size: 1-3/8” x 5/8”
- Strike size: 1-3/16” x 5/8”
Finish:
- Satin Chrome

CYLINDER PULL
- 1-1/4” hole for mortise or rim cylinder.
- Cast brass or bronze base material.
- 2-3/4”H x 1-7/8”L
Finish
- Satin Chrome

FLUSH BOLT
- Base material: brass.
- Face size: 1” x 6-3/4”
- Keeper size: 1” x 2-1/4”
- Guide: 7/8” x 2-1/4”
- Extension length: 12” (length measured from centre of operating lever to end of bolt when in retracted position).
Finish
- Satin Chrome

CAST WALL STOPS
- All fasteners included.
GSH231
- For use with most locksets.
GSH250B
- For use on locksets with push-in locking button.
Finish - Diameter - Projection
- Satin Chrome 2-3/8” 1”
- Satin Chrome 2-1/2” 1”


Gallery

Floor Stops, Door Pulls & Plates

Misc Commercial Hardware-Floor Stops-Door Pulls and Plates

FLOOR STOPS
GSH200 C26D: Low Profile Door Stop.
Material: Cast.
Size: 1-3/4”D x 1-1/8”H
GSH201: Door Stop Riser.
Material: Cast.
- Raises GSH200 or GSH218 higher for larger door gaps.
GSH218: Standard Profile Door Stop.
Material: Cast.
Size: 1-3/4”D x 1-3/8”H
GSH281: Standard Profile.
- Heavy duty floor stop made of cast brass or bronze.
Size: 2-3/4”H x 2-5/8”L x 1-5/8”W
- Machine bolts with shields supplied.
Finish - Rise
- Brushed Chrome - 1/8”
- Brushed Chrome - 1/2”
- Brushed Chrome - 3/8”
- Brushed Chrome - 2-3/4”

DOOR PULLS & PLATES
4009: Pull Handle
- Projection: 1-1/2”
- Centre: 9”
- Material: 3/4”D
80A & 81A: Protective Plates
- .050 thickness for 80A & 81A plates.
- Fastening: Screw type mounting supplied with oval undercut head sheet metal screws standard, all holes countersunk.
- Beveling: All push plates supplied beveled four sides standard.
- 80A packed individually in a cardboard box to protect while shipping.
Type - Finish - Size
- Round Pull - Aluminum - 9”
- Round Pull - Polished Brass - 9”
- Round Pull - Satin Stainless - 9”
- Pull & Plate - Aluminum - 3-1/2” x 15”
- Kick Plate - Satin Stainless - 8” x 34”
- Push Plate - Aluminum - 4” x 16”
- Push Plate - Polished Brass - 4” x 16”
- Push Plate - Satin Stainless - 4” x 16”


Glynn-Johnson

Door Holders & Door Stops

Misc Commercial Hardware-Door Holders and Door Stops

HEAVY DUTY DOOR HOLDERS & STOPS
- For heavy-duty applications.
- Non-handed.
- 900 series: Channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation.
- Can be used in conjunction with most surface-applied door closers.
- Can be mounted for openings ranging from 85º to 110º.
Hold-Open Function
- Holds the door open at a predetermined position permitting an unobstructed traffic flow through the opening.
- Can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel to engage the hold open mechanism, when flipped over it acts as a stop and shock absorber.
- Tension on the hold-open mechanism can be adjusted to offset air currents or other exterior conditions.
Stop Function
- Provides a reliable method for shock absorbing capability.
- Can be used on fire doors.
Size - Door Opening Butts - Door Opening Center Hung
Surface Mount: Stop Only
- 3 27-1/16”–33” 33-1/16”–39”
- 4 33-1/16”–39” 39-1/16”–45”
Surface Mount: Hold Open
- 4 33-1/16”–39” 39-1/16”–45”
Concealed Mount: Stop Only
- 4 33-1/16” – 39” 45-1/16” – 51”

DOOR STOP
Kick Down Holder
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip; rubber shoe is securely fastened with screw, shoes are easily replaced when worn.
- Door-to-floor clearance: 2” or less.
- Plate height: 2-1/4”
- Plate width: 1-7/16”
- Meets ANSI/BHMA 156.16, L11381.
Description:
- Kick Down Door Stop
- Screw Type Replacement Heel for FS544


Ives

Flush Bolt, Surface Bolts & Roller Latch

Misc Commercial Hardware-Flush Bolt-Surface Bolts and Roller Latch

CONSTANT LATCHING FLUSH BOLT
- Constant latching - inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released.
- Inactive door will relatch automatically when closed.
- Low actuation forces.
- Fits standard ANSI A115.4 door and frame preparations.
- Non-handed.
- 3/4” bolt throw with a 7/8” vertical adjustment.
- 3/4” backset.
- Standard rod length is 12”, which is measured from the center of the flush bolt body to the bolt tip.
- Body size: 1” W x 6-3/4” L x 2” D
- Meets ANSI A156.3 type 27
- UL listed 3 hr fire doors 8’0” x 10’0”
Description:
- Metal Door Flush Bolt Set

SURFACE BOLTS
- Standard surface bolt has 1” throw for maximum security.
- Ideal for all types of doors.
- Fully concealed mounting prevents vandalism.
- Available in locking version: unit locks in both the up and down position - locking bolts are furnished with 2 keys in 4 keying variations.
- Units packed with wood and machine screws to meet most field conditions.
- Units available with either a universal top strike (T) or a flat bottom strike (B).
- 1630 series is constructed of heavy duty steel.
- UL listed up to 3 hours when used on the inactive door of pair up to 8’ in height.
- Meets ANSI/BHMA A156.16, L84161.
- Sex bolts available where required.
- Locking Bottom Strike.
- Locking Top Strike.
- Non-Locking Bottom Strike.
- Non-Locking Top Strike.
Description:
- Bottom Surface Bolt
- Bottom Surface Bolt (Locking)
- Top Surface Bolt
- Top Surface Bolt (Locking)

ROLLER LATCH
- Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed.
- The projection of the roller is easily adjusted using adjusting screws on the face of the unit.
- Maximum projection of the roller is 3/8” allowing for variance in the door clearance.
- Nylon roller standard.
- Forged brass construction.
- Meets ANSI/BHMA A156.16, E19091.
Body - Strike
- 1” x 3-3/8” x 1-11/16” - RL30’s C/W Ansi Strike


Major MFG

Patio Lock, Knob Shroud & Cross Bore Relocation Drill Guide

Misc Commercial Hardware-Patio Lock-Knob Shroud and Cross Bore Relocation Drill Guide

OCTOPOD PATIO DOOR LOCK
- Ideal for sliding patio doors, sliding windows, swinging doors, double doors, french doors & other applications.
- Can be used on narrow stile doors and frames with a width of only 1-5/8”.
- Lock housing accepts standard 1-1/8” mortise cylinder (not included) allowing it to be keyed to other locks in a system.
- Mounts at top or bottom of door.
- Equipped with a 3/8” diameter x 9” long locking bolt with a 2-3/8” throw standard.
- Other models available by special order for Assa & Medeco cylinders and finishes other than the standard aluminum finish.

KEE BLOK LOCKOUT SHROUD
- Blocks all existing keys to knob locks or padlocks in seconds.
- Fits 90% of knob locks as well as many popular models of padlocks.
- Compact unit is constructed of high strength aluminum alloy.
- A model is also made for lever handles and is available by special order.
Keying:
- KA MMC2
- KD

CROSS BORE RELOCATION DRILL GUIDE
- Easy way to correct a mis-drilled cross bore or to relocate a backset from 2-3/8” to 2-3/4” or vice versa.
- Remove existing lock and install the HIT-23 in the latch hole. Re-drill using a hole saw with the drill blank installed.
- For both 1” and 1-1/8” face plates with a 1” diameter latch hole.
- Solid steel construction.


Major MFG

Jamb Jackets, Door Brackets & Latch Emboss Tool

Misc Commercial Hardware-Jamb Jackets-Door Brackets-Latch Emboss Tool

JAMB JACKETS
- Door jamb reinforcer repairs and covers damaged and split out door jambs damaged by a break-in without the expense of replacing the whole jamb.
- Manufactured from sheet metal approximately 1/16” thick for 1-3/4” doors.
- 1-3/8” available by special order.
- Adds reinforcement to undamaged jambs for additional security.
- Designed to cover standard 1/2” rabbeted jamb.
- Finished in beige powdercoat for durability, may be repainted to match existing colour scheme.
- Recessed to accommodate T-strike except JJE model.
Length:
- 24”
- 36”

HOLLOW METAL DOOR BRACKETS
LMB01
- For installing cylindrical knob locks or dead-bolts on hollow metal doors.
- Made of 12 gauge cold rolled steel.
- Supplied with adhesive template and pop rivets for convenience & accuracy.
- Center cut-out for seamed doors.
LMB02
- As above for mortise locksets.
LMB03
- For hollow metal or aluminum door & frames (set of 2).
Applitcation:
- Cylindrical Knob & Deadbolt.
- Standard Mortise Locks.
- Metal, Aluminum Door & Frames.

“PIT BULL” LATCH EMBOSS TOOL
- For latch installations on 18 & 20 gauge hollow metal steel doors, this tools creates a rectangular formed pocket at the edge of the door.
- A few turns with a wrench will squeeze an indentation that will accept both 1” and 1-1/8” wide by 2-1/4” high latches.
- Not for seam doors.


Miscellaneous

Stop Kick Down, Wind Chain Stop, Latch Guards & ASA Strikes

Misc Commercial Hardware-Stop Kick Down-Wind Chain Stop-Latch Guards and ASA Strikes

STOP KICK DOWN
- Zinc cast door stop finished in chrome.
- Size 4-3/4” from pivot point.
- Furnished with rubber tip.

WIND CHAIN STOP
- Heavy-duty steel welded chain.
- Two compression coil springs.
- Zinc die-cast mounting brackets.
- Grey vinyl cover.
- Finish: Zinc plated.
Length:
- 25-1/2”

LATCH GUARDS
LG111
- Non-handed unit for narrow stile aluminum glass doors.
804
- Non handed unit has a cutout for knob rose.
- Fastened with 4 thru-bolts.
Type - Finish
- Key-In-Knob - Cadmium
- Narrow Stile - Aluminum
- Narrow Stile - Duronodic

ASA STRIKES
- Meets the ASA strike specification size of A115.2 of 4-7/8”H x 1-1/4”W.
- Used for knob & lever sets in commercial applications.
Type - Finish
- Standard - Brushed Nickel
- Standard - Polished Brass


Miscellaneous

Knob & Lever Guards, Gate Latch, Cabinet Handles & Freezer Handles

Misc Commercial Hardware-Knob and Lever Guards-Gate Latch-Cabinet Handles-Freezer Handles

KNOB & LEVER GUARD
- Designed to prevent “wrenching” of knobs & levers.
- Made of aircraft aluminum and powder coated for long life.
- Built in handle allows the door to easily be opened.
For:
- Knob
- Lever

SECRET GATE LATCH
- For dutch door applications and counters.
- Case size is 2” x 2-3/8” with 3/4” strike.

CABINET HANDLES - ‘T’ & ‘L’
- Handles can be used for a variety applications including storage cabinets, locking containers, truck caps & garage doors.
Type - Finish - Fastening - Centers
- T - Silver - Back - 1-1/2”
- T - Black - Thru-Bolt - 1-1/2”
- T - Silver - Thru-Bolt - 1-1/2”
- L - Silver - Thru-Bolt - 1-3/4”

FREEZER HANDLES
1 0056 L06021
- Bolt-type tongue provides positive locking action.
- Optional adjustable roller strike.
- Can be locked with a padlock (not included).
1 0173 C00004
- Positive latching keeps door shut tight; guards against pop-opens.
- Cylinder locking with strike.
- Two-way adjustment compensates for door sag and gasket wear.
- Replaces discontinued National C8765 unit.
Description
- Handle
- Strike For 1 0056 L06021
- Freezer Handle
- Strike For 1 0173 C00004
- Cylinder For 1 0173 C00004


Miscellaneous

Padbolts, Barrel Bolts, Push Plates, Pull Plates & Flush Bolts

Misc Commercial Hardware-Padbolts-Barrel Bolts-Push Plates-Pull Plates and Flush Bolts

PADBOLTS & BARREL BOLTS
168K
- 5” extra heavy duty bolt accepts padlock.
- Padlock hole is 1/2”.
- 1-3/4” bolt throw.
201A
- Solid brass barrel bolt.
- 19/32” throw.
- Multiple sizes available.
1068
- 4-1/2” heavy duty bolt accepts padlock.
- Padlock hole is 15/32”.
- 1-3/4” bolt throw.
Material - Length
- Zinc - 5”
- Brass - 2”
- Brass - 2-1/2”
- Brass - 3”
- Zinc - 4-1/2”

PUSH & PULL PLATES
1410
- Push/pull plate combination with a 9” pull mounted on a 4” x 16” push plate.
- Aluminum finish.
H1413
- Pull handle only.
Description
- Push Pull Handle Set.
- 9” Pull Handle Only.

FLUSH BOLTS
- For keeping the inactive door of a pair of doors stationary.
- DC840 supplied in pairs.
- DC860 sold individually.
For - Height - Width - Throw
- Steel - 6-1/4” - 1’ - 5/8’
- Aluminum - 5-1/4” - 15/16” - 5/8”


Miscellaneous

Deadbolt, Deadlatch, Cylinder, Cylinder Guard, Curved Shims & Mailbox Parts

Misc Commercial Hardware-Deadbolt-Deadlatch-Cylinder-Cyliner Guard-Curved Shims and Mailbox Parts

REPLACEMENT DEADBOLT & DEADLATCH
Description - Finish

CYLINDER & CYLINDER GUARD
732
- 1” cylinder for Adams Rite narrow stile locks supplied with trim ring.
5510
- Heavy aluminum plate attaches to door with 4 steel 3/16” pop rivets (included).
- 1/4” cylinder recess.
- Measures: 4-1/32”H x 1”W
Description
- Mortise Round Turn Cylinder
- Cylinder Guard

CURVED SHIMS
- Facilitates removing a plug from a cylinder when the original keys are not available.
- Package of 25

RIOPEL MAILBOX PARTS
- P. Riopel manufactures a full line of products for residential, commercial, office and institutional buildings. All of these products are available by special order from IDN Canada. Call for technical assistance, shop drawings or pricing.
3950 & 3953
- Mailbox includes spring clip for mounting.
- For 1000, 2000 & 3000 series mailbox units.
R115
- Switch box accepts Crown Lock (supplied by Canada Post).
- Size: 6”H x 2-3/8”W
Description - Finish
- Mailbox Lock - Nickel.
- Mailbox Lock - Nickel.
- 1000 & 2000 Door - Stainless Steel.
- Crown Lock Switch Box - Grey Enamel.