Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Panic Bars

Series 22EO or 22EO-F Panic Bars
Back To Main Catagories

Adams Rite

Exit Devices & Parts

EXIT DEVICES
- UL life-safety listed, ANSI/BHMA A153.6 Grade 1
8099 Active Dummy Bar with Switch
- Can be wired normally open or normally closed to operate maglock, alarm, etc.
- No latching mechanism.
8211 Surface Vertical Rod
- For 1-3/4” thick narrow stile glass/aluminum doors with widths of 30” to 36" and heights up to 8'.
- Requires 2” stile minimum.
- Will accept optional rim cylinder.
- Patented top latching mechanism interlocks door to frame.
- Adjustable rods encased in contoured covers.
8400 Mortise Exit Device
- Fits single leaf aluminum stile glass door, standard narrow stile cutout.
- 5/8” bolt throw.
- Minimum stile width is 2”.
- Strike for installations where 1-3/4” door closes flush with jamb.
- Push bars are extruded anodized aluminum with black ABS end cap.
- Handing can be reversed.

8000 SERIES EXIT DEVICE PARTS
For 8800 Series
- Old Style Dogging Key.
- New Style Dogging Key.
- Active End Cap.
For 8200 & 8800 Series
- Dogging Assembly.
For 8400 Series
- Active End Cap.
- 2-1/2” Thick Door Kit.


Detex

Exit Control Locks, Accessories & Fire Rated Exit Control Locks

EXIT CONTROL LOCK
- Attack resistant design withstands over 2200 lbs of outside pull force.
- Reduces internal and customer theft.
- Single point 1” throw saw resistant dead bolt.
- 100 decibel alarm, powered by 9-volt battery (included).
- Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders.
- Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed.
- Non-handed.
- Locking and unlocking the dead bolt always arms and disarms the alarm.
- Resetting the alarm can only be accomplished with a control key.

ACCESSORIES
ECL2111K
- Siren/battery conversion kit - for ECL-230C & D.
- Converts ECL-230 6 volt lantern battery to 9 volt battery & siren.
- ECL435K
- Adjustable surface strike bracket for some double door applications where one door is held closed with surface or flush bolts.
- For use on left hand, right hand inswinging doors or double doors with one door stationary using flush bolts or DDH-2250.
- ECL437K
- Adjustable surface strike for use with outswinging doors.
- PP5572
- Cover lock, nut, and 2 keys.
- 9 Volt Conversion Kit.
- Adjustable Surface Strike.
- Standard Strike.
- Cover Cam Lock for ECL230, EAX300 & EAX500.

ECL600 FIRE RATED EXIT CONTROL LOCKS
- Fire rated and code-compliant relatching exit device.
- Reduces internal and customer theft.
- 1” throw saw resistant dead bolt & 3/4” latching bolt.
- 100 decibel alarm, powered by 9-volt battery (included).
- Accepts 5-pin through 7-pin standard and interchangeable core rim cylinders.
- Durable steel plate with photo luminescent sign absorbs light to “glow in the dark” when lights are dimmed.
- Non-handed.
- Locking and unlocking the dead bolt always arms and disarms the alarm.
- Resetting the alarm can only be accomplished with a control key.


Detex

Hinge Bolts, Fire Rated Alarmed & Delayed Egress Exit Devices

HINGE BOLTS
- Provides hinge-side protection against break-ins
- Adds additional locking points, improving holding strength to slow down crowbar attacks.
- Easy to install.
- Can be added to almost any outswing door application.
- Choose the right level of protection with kits of 1 bolt, 2 bolts or 3 bolts.
- Kits include through-bolt mounting hardware.
- One piece stainless construction provides superior holding strength.
- Excellent for exterior application or that doors that get wet Single Hinge Bolt, Double Hinge Bolts, Triple Hinge Bolts.

V40 ALARMED & DELAYED EGRESS EXIT DEVICES
V40EB
- Reduces internal and customer theft while meeting building code requirements.
- Alarmed 100 decibel exit device powered by standard 9-volt battery.
- Stainless steel, 3/4” deadlocking Pullman-type latch bolt.
- Heavy-duty ribbed aluminum rail extrusion.
- Fits 36” doors, (can be cut down in the field) 1-3/4” to 2-1/4” thick with minimum 2-1/2” stiles.
- 1/8 turn of mortise cylinder provides dogging of the device.
- Controls foot traffic, deters unauthorized exits, and prevents loss.
- Heavy-duty angled end cap.
- Accommodates all sizes of mortise cylinders with a standard Yale cam; collar is required for 7-pin IC cylinders.
- Patented back plate and plastic strike locator provide paperless template for perfect alignment of unit on door and frame.
- Field selectable key rearm or 2 minute auto rearm.
- Visual and audible arming indicators status are field selectable.
- V40EE
- All the features of the V40EB above with delayed egress.
- Powered by regulated power supply that delivers a constant 24VDC of filtered and regulated voltage at a rated load of 1A.
- Fire alarm input can be connected at power supply.
- Remote signal output and remote bypass input standard.
- Includes delayed egress panic bar, 24VDC filtered and regulated power supply, 3’ confuit loop and door sign that says “PUSH UNTIL ALARMS SOUNDS, DOOR CAN BE OPENED IN 15 SECONDS”.
- 9V battery provides alarm function only in case of power failure Standard, Delayed Egress.


Sargent

Keypad Locksets, 90 Series Exit Device & Trim

KEYPAD LOCKSETS
- Keypad made of ultraviolet stable textured material.
- Operating temperature for keypad: 4°F to 140°F.
- Adjustable unlock time.
- Over 1,100,000 possible user combinations.
- 100 user codes.
- Operates utilizing any one to six digits per code - digits may be repeated or start with “0”.
- “One time” user codes allow visitors “one time” entry.
- Entry of three wrong user codes in succession disables all codes for ten seconds.
- Unit can be put in “passage only” mode at keypad.
- One master code - assigns emergency, supervisory and user codes.
- Meets ANSI A156.2 Grade 1 requirements.
- Operates with 4 “C” alkaline batteries (included).
- Key override on both models.
- External battery input connector on under side of keypad in case of battery failure.
- Typical 40,000 operations per set of batteries.
- For 1-3/4” thick doors.
- Infrared link to optional printer (52-2069) shows last fifteen transactions.
- Cylindrical Latch.
- Mortise Latch.

90 SERIES RIM EXIT DEVICES & TRIM
- Maximum 4-1/2 inch (114mm) projection, minimum 2-3/4 inch (70mm) dogged.
- Stainless steel springs throughout.
- ANSI A156.3 Grade 1.
- UL Listed.
- UL Listed to Canadian safety standards.
- Double doors require astragal.
- For doors: Wood or metal; 1-3/4” thick standard, 4-1/8” minimum stile.
- Mounting: Supplied standard with wood and machine screws.
- Chassis cover: Brass, bronze or stainless steel.
- Chassis: Nonferrous alloy.
- Crossbar: 1” brass, bronze and stainless steel tubing.
- Cross bars can easily be cut to length in the field.
- Trim is through-bolted.
- Hand: Non-handed.
- Dogging: Standard Allen key dogging.
- Strike: 649 standard.
98 T PTB
- Pull is through bolted to the exit device through the chassis which allows for perfect alignment of the thumb piece and cylinder.
- Key outside unlocks/ locks thumb piece.
- Rim cylinder supplied.
- Reversible Rim Exit Device.
- Trim Sain.


Sargent

3828 Series Exit Devices & Trims

3828 SERIES RIM EXIT DEVICES & TRIM
- Rugged exit device in a rim design
- Chassis mounted unit construction assures easy installation and maintenance.
- ANSI/BHMA Standard 156.3 Grade 1.
- UL listed.
- UL listed to Canadian safety standards.
- For doors: 1-3/4” thick standard, 4-1/2” minimum stile width required for single or double door applications using standard 649 strike.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Mounting: Furnished standard with wood and machine screws; Available with through bolts and mortise nuts.
- Tapered push rail and angled covers.
- Steel endcaps and covers.
- Chassis: Nonferrous alloy.
- Rail assembly: Roll formed steel.
- Finish: Sprayed aluminum enamel or polyester powder coated.
- Hand: Non-handed.
- Latchbolt: Stainless steel 3/4” throw.
- Strike: 649 packed standard.
- Dogging Feature: Allen-type key furnished standard (non fire rated devices only).
- Rim Exit Device.
- Fire Rated Rim Exit Device.

3828 SERIES TRIMS
- For doors: 1-3/4” only.
28CLL
- UL listed to Canadian safety standards.
- Non-handed.
- Classroom function: Key in lever locks or unlocks lever.
28LLL
- UL listed to Canadian safety standards.
- Non-handed.
- Passage function: Latch bolt operated by lever, no cylinder.
28C OB
- Entrance function: Key in knob locks or unlocks knob.
28C TP
- Classroom function: Key locks or unlocks thumbpiece.
28 K HTB
- UL listed to Canadian safety standards.
- Through-bolted with 3 mortise nuts.
- Pulls project 1-1/2” from door face.
- Night latch: Outside by pull and key.
- Lever Classroom, Lever Passage, Knob Entrance, Pull Night Latch, Thumbpiece Classroom.


Sargent

8710 & 8888 Series Exit Devices

8700 SERIES SURFACE VERTICAL ROD EXIT DEVICE
- Two point latching: Top & bottom latchbolt projection adjustable through centre case.
- Standard bottom latch compatible with latch track thresholds (by others).
- Single and double door applications.
- Handing: Right hand reverse bevel.
- ANSI A156.3 - 2001 Grade 1; tested to over 16 million cycles.
- Rods are 1/2” brass, bronze or stainless steel.
- Door types: Wood or metal 1-3/4” thick door, 4-1/2” minimum stile with trim and 3-1/2” minimum stile without trim.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Strikes: 646 top strike (panic and fire-rated), 624 bottom strike; 655 fire-rated bottom strike.
- Dogging feature: Hex key dogging standard.
- Mounting fasteners: Supplied standard with wood and machine screws.
- Top and bottom bolt: Brass, stainless steel.
- Device centreline from finished floor: 41” (1041 mm) for standard applications: 38” (965mm) for elementary schools and to meet local accessibility standards when a 300 series auxiliary control is used.
- Centre case dimensions: 8-3/8” x 2-5/8”.
- Projection: Pushbar neutral – 3”; Pushbar depressed – 2-1/8”.
- Door opening/height: must be specified (102” max door opening).
- Stainless steel finish.
- 36” Vertical Rod Exit Device.

8888 SERIES REVERSIBLE RIM EXIT DEVICES
- The perfect stocking device designed for standard width stile applications on wood and metal doors.
- Non-handed.
- Single and double door applications.
- ANSI A156.3 - 2008 Grade 1.
- UL Fire and Panic Listed.
- Door types: Wood or metal 1-3/4” and 2-1/4” thick door.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Mounting is supplied standard with wood and machine screws. Available on order with through bolts and mortise nuts.
- Chassis cover: cold drawn stainless steel, bronze or bronze.
- Stainless steel latchbolt, 3/4” throw.
- 649 strike standard (panic & fire rated).
- Stainless steel finish.
8888F:
- Chassis - Nonferrous alloy (Panic).
- Hex key dogging standard on non fired rated devices.
12-8888F:
- Chassis - Ferrous alloy (Fire Rated).
- Standard Rim Exit Device.
- Fire Rated Rim Exit Device.


Sargent

80 Series Trims & Exit Device Parts

80 SERIES TRIMS & LATCH RETRACTION KIT
R56A F32D
- Retrofit standard mechanical F Rail - 33” to 36” size: 11-1/4”.
- Contains ribbon wiring.
700 Series ET Trims:
- ET lever trims can be used for all 80 series exit devices.
- Escutcheons are forged or cast brass and the levers are brass or bronze.
- Satin chrome finish.
704ETL26D LA
- Night Latch: Key retracts latch.
- #34 rim cylinder supplied, LA keyway.
710ETL26D RHR
- No outside operation, no cylinder.
- ET Control is used as pull only.
713 8 ETL 26D LA
- Key outside locks /unlocks trim.
- #41 mortise cylinder supplied, LA keyway.
715 8ETL26D RHR
- Passage only, no cylinder.
- Electric Latch Retract Push Kit.
- Night Latch Trim, LA Keyway.
- No Outside Operation, Pull Only Trim.
- Key Outside Unlocks/Locks Trim, LA Keyway.
- Passage Only Trim.

EXIT DEVICE PARTS
End Cap Screw Series 98.
- Dogging Kit Series 20 & 80.
- Dogging Key Series 98.
- End Cap Series 98.
- Arm Spring Series 98.
- Hub Spring Series 700 ET Trim.
- Hub Spring J Lever Only Series 700 ET Trim.
- Latch Spring Series 9800.
- Latch Spring Series 9898.
- Cylinder Dogging Kit Series 80.


Von Duprin

22 Series Exit Device & Trim

22 SERIES EXIT DEVICE
- 22 rim exit device for all types of single and double doors with mullion.
- UL listed for panic exit hardware.
- Rim cylinder (not supplied) retracts latch.
- Rated devices are ANSI A156.3, 2001, Grade 1.
- Covers stock hollow metal doors with 161 cutouts.
- Device ships ready for all functions; EO, DT, NL, TP, K, L.
- Non-handed.
- Device lengths: 3’.
- Supplied with 299 dull black strike.
- Dogging feature: Hex key dogging standard (non-fire rated).
- Deadlocking latch bolt 3/4” throw (22EO & 22EO-F).
22EO
- Minimum door opening 1/2” stop: 26-1/2”.
- Minimum door stile width: 3-13/16”.
22EO F
- Minimum door opening 1/2” stop: 26-1/2”.
- Minimum door stile width: 4-3/8”.
- Fire rated.
2227EO
- Minimum door opening 1/2” stop: 25-7/8”.
- Minimum door stile width: 4-3/8”.
- Door height: 7’.
- Rim Painted.
- Fire Rated Rim Painted.
- Vertical Rod.

22 SERIES TRIMS
210K28
- Escutcheon plate size: 3” x 4-25/32” x 3/32”.
- Includes cylinder.
230L SP28
- Escutcheon plate size: 3” x 6-3/8” x 15/16”.
- Cylinder not included.
230TP/ 230NL SP28/ 230TP BE SP28:
- Pull centre: 5-1/2”.
- Escutcheon plate size: 3” x 12-1/16” x 3/32”.
- Cylinder not included.
Classroom
- Knob Trim K KIK.
- Lever Trim, RHR L 1-1/4” Mortise.
- Thumbpiece with Cylinder TP 1-1/4” Mortise.
Storeroom
- Night Latch NL Rim.
Passage
- Blank Escutcheon TP.


Von Duprin

44 & 88 Series Cross Bar Exit Devices & 88 Series Accessories

44 SERIES EXIT DEVICES
44EO
- Non-handed economical exit device is supplied with single door 299 strike.
- Device will fit 1-3/4" thick doors and is field sizeable from 2'6" to 4' wide doors.
- Rim cylinder (not supplied) retracts latch.
- Sprayed aluminum finish.
- Supplied with 299 dull black strike.
- Dogging feature: Hex key dogging standard.
- Deadlocking latch bolt 3/4” throw.
- cUL listed 266M panic hardware.
44TP
- Like 44EO bar but supplied with gripset that is operated by rim cylinder, which locks or unlocks the 2 part thumbpiece.
- Size of handle is 2" x 9-5/8".
Note: No replacement parts are available for the 44 series exit devices
- Exit Only.
- Device with Thumbpiece Trim.

88 SERIES EXIT DEVICES & ACCESSORIES
- Conforms to ANSI A156.3, 1989, Grade 1.
- For all types of single and double doors, UL listed for accident hazard installations.
- Covers stock hollow metal doors with 86 or 161 cutouts.
- Standard cross bar length: 42”, fits doors up to 48” (field sizeable).
- Door thickness: 1-3/4”.
- Non-handed.
- Hex key dogging.
- Finish: Satin chrome with stainless steel cross bar.
88EO
- Heavy duty rim mounted exit device.
- 3/4" throw latch bolt.
- Accepts rim cylinder for retraction of latch (not supplied).
88TP
- Same as 88EO with thumbpiece that can be locked and unlocked by use of rim
- cylinder (not supplied).
8827
- 5/8” throw latch bolt.
- Fits door stiles as narrow as 3-1/2”.
- Exit Only.
- Rim Exit Device with Thumbpiece Trim.
- Surface Mounted Vertical Rod Exit Device.
-880TP
- Requires rim cylinder for operation (not supplied).
- Escutcheon size: 3” x 14-3/16” x 3/32”.
050101/050102
- Converts any standard 88 series rim exit device.
- Key Retract Thumbpiece Trim.
- Conversion Kit for 880NL.
- Conversion Kit for 880TP.


Von Duprin

98/99 Series Exit Devices & Trim

98/99 SERIES EXIT DEVICES
- Devices are equipped with a fluid dampener which decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations.
- Rim devices are equipped with a deadlocking latchbolt.
- ANSI A156.3, 2001, Grade 1, UL listed.
- Non-handed.
- Dogging feature: Hex key dogging standard (non fire rated).
- Devices are 3’ long can be field sized for doors from 2’4” to 3’ wide.
- Rim mount devices supplied with 299 surface strike.
- Supplied with mounting hardware for 1-3/4” to 2-1/4” thick doors.
- Vertical devices are for 7’ high doors with 5/8” deadlocking latches.
- Centre case dimensions: 8” x 2-3/4” x 2-3/8”.
- 98 Series features smooth mechanism case.
- 99 Series features grooved mechanism case.
- Rim Exit Device.
- Surface Vertical Rod Exit Device.

98/99 SERIES EXIT DEVICE TRIMS
- Cylinder not included, pull centre: 5-1/2”, all stocked in satin chrome
990DT 26D/ 990NL RV26D
- Escutcheon plate size: 3” x 14-3/16” x 3/32”
990TP BE/ 990TP R26D/ 992L R/V 06 LHR 626/ 996L06 626
- Escutcheon plate size: 2-3/4” x 10-3/4” x 27/32”
996L
- 996L Breakaway™ trim is effective in areas where vandalism to door hardware is a problem, non-handed.
- Dummy Trim Dummy No Cylinder.
- Night Latch Storeroom Rim Cylinder.
- Thumbpiece, Blank Escutcheon Passage No Cylinder.
- Thumbpiece Classroom 1-1/4" Mortise.


Von Duprin

Narrow Stile Exit Devices, ELR Kits & Accessories

33A & 35A SERIES NARROW STILE EXIT DEVICE
- Devices are equipped with a fluid dampener which decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations.
- Equipped with a deadlocking latchbolt to provide additional security and improved performance.
- For all types of single and double doors with mullion.
- Non handed for left and right doors.
- Dogging feature hex key dogging standard.
- Fits door stiles as narrow as 1-3/4”.
- Devices are 3’ long, can be field sized for doors from 2’4” to 3’ wide.
- Rim mount devices supplied with 1439 roller strike.
- Supplied with mounting hardware for 1-3/4” to 2-1/4” thick doors.
- Center case dimensions: 8-3/16” x 2-13/32” x 1-9/16”.
- ANSI A156.3, 1994, Grade I, UL listed.
- Grooved Mechanism Case Satin chrome.
- Smooth Mechanism Case Aluminum.
- Rim Strike for 33A & 35A.

ELECTRIC LATCH RETRACTION KITS & ACCESSORIES
050070
- Electric latch retraction (ELR) conversion kit for 33, 35, 98 & 98 series 3’ exit devices.
- Requires PS914 & 900 2RS power supply to function.
050251 00
- Field installable request to exit (RX) switch signals access control systems when pushpad is depressed.
- For 22, 33, 35, 98 & 99 devices.
EPT10
- Electric power transfer conducts current from the frame to the edge of a swinging door.
- Fully concealed when door is closed.
- Ten 24 gauge wires; up to 1 amp @ 24VDC with a 16 Amps maximum surge.
PS914
- Size: 14”H x 12”W x 4”D.
- Output: 4A @ 12/24 VDC output, field selectable with jumper.
- Universal 120-240 VAC input.
- Designed with high in rush current for powering electrified panic devices.
- Low voltage DC, regulated and filtered.
- UL listed 294.
900 2RS
- 2 relay EL panic device control board for use with the PS914 power supply.
- Recommended for use with 914 when powering an EL device.
- Required for use with 914 when powering 2 EL devices.
- 3’ EL Conversion Kit.
- RX Switch Kit.
- Power Transfer.
- 4 Amp Power Supply.
- 2 Relay EL Panic Device Control Board.


Von Duprin

Exit Device Parts & Accessories

98/99 SERIES ACCESSORIES
- Retrofit alarm kit for 99 devices to deter unauthorized use of an opening.
- ALK kit contains a 85 decibel internal horn: When the touch bar is depressed, the horn sounds to signal that the opening has been violated.
- Alarm kit can be armed or disarmed by key.
- Uses a standard 1-1/4” mortise cylinder with a straight cam (not supplied).
- Operates on one standard 9 volt alkaline battery.
- Furnished with a RX-request to exit switch.
- Includes “EMERGENCY EXIT ONLY, ALARM WILL SOUND” decal.
- It is recommended to use the non stock ALK-LX kit when used in conjunction with surface mount vertical exit devices.
- Retrofit kit for cylinder dogging on 98/99 devices (except fire rate) to replace the standard hex key dogging unit.
- Requires a 1-1/4” mortise cylinder with straight cam (not supplied)
- Alarm Kit 99 Series.
- Cylinder Dogging Kit Series 99, Except Fire Rated.
- 12” Extension Rod Kit Series 9827 & 9927.

EXIT DEVICE PARTS (ALL SERIES)
-Top Latch Less Cover Series 9827, 9927
- Bottom Latch Less Cover Series 9827, 9927
- Fitting Set Series 5654/5754
- Fitting Set Series 1654/4954
- Tailpiece Guide Lead Kit Series 360, 990
- Vertical Rod Latch Case Mounting Bracket Series 2227, 33/3527, 98/9927
- Latch Case Cover Kit Series 9827, 9927
- Wedge Series 88
- Wedge Tite Adapter Screw Series 55, 88
- Lever Arm Axle Assembly Series 88
- Dogging Screw Series 88
- 5/32” Hex Dogging Key Series 22, 98, 99
- 7/32” Hex Dogging Key Series 44, 88
- Double Door Strike Series 44, 55, 88, 98, 99
- Standard Door Strike Series 44, 55, 88, 98, 99
- Truarc Retaining Ring Series 991, 992
- Cylinder Retainer Cup Series 210, 990
- Lift Spring Series 992
- End Cap Series 22
- Centre Case Cover Series 22