LOW PROFILE BRASS SINGLE CYLINDER DEADBOLTS - Distinctive hardware for fine homes. - Standard door prep and installation. - Solid brass cylinder, housing, collar and rosette. - Hardened steel bolt. - Heavy gauge steel understrike and brass trim strike shipped with every deadbolt. - Includes latch and strike plate. - For 1-3/8” to 1-3/4” doors with 2-3/4” backset. - Requires 1-1/2” crossbore. - SC1 keyway standard, WR5 keyway available by special order. - Extension kit for 2-1/4” doors available by special order.
BRASS TUBULAR ENTRANCE HANDLESETS - Stocked with Egg knobs. - Solid forged brass trim. - Fits any door between 1-3/4” to 2-1/4” thick with 2-1/8” bore standard door prep. - Marietta: 5-1/2” centre-to-centre. - SC1 Keyway standard. - Stocked with both 2-3/8” & 2-3/4” backsets. - Handing required if Lever used on inside or if Interconnect device is specified.
KEYED PATIO DOOR BOLTS - Safe bolting or secure deadlocking operation. - Suitable for both aluminium and timber doors. - For hinged, sliding & french doors. - Reversible bolt for ease of installation. - Concealed fixing for security and style. - Square drive screws for ease of installation.
BUMP HALT™ KITS - Bump Halt™ Bump Resistant Cylinder Technology resists the transfer of force from the bump key to the pins. - Innovative patent pending design. - Kits enable the conversion of a new or existing Ilco® or LSDA® cylinders to be “bump resistant”. - Cost efficient and effective. - No special tools and/or machining is required. - Conversion kits contain 10 pins, 10 springs and instructions. - One spring and one pin will provide resistance to “bumping”; adding an additional pin and spring will increase the security of the cylinder. Cylinder Application: - Key-In-Knob & Deadbolt Kit. - Mortise & Rim Kit.
RIM LOCKS - Door thickness: 1-1/4” to 2-1/4”. - Completely reversible. 220 53 51 - Has latch hold back function. 530 & 535 - Jimmy & pry proof rim locks. Type: - Night Latch 2-3/8”. - Single Cylinder Jimmyproof 2-1/2”. - Double Cylinder Jimmyproof.
CHAIN & PATIO LOCKS - 201 - Door chain lock. - Brass finish. 300 59 51 KADF8 - 1054UN steel stamped key. - 5 brass disc tumblers with 100 combinations. - KA DF8 keyway.
MORTISE DEADBOLT - Heavy duty cylinder housing, reinforced free turning collars - Cylinders are retained by set screws, allen wrench is furnished - Armored front shields set screws, solid brass trim - Uses standard mortise cylinder with Adams Rite type cam - Fits doors from 1-3/8" to 1-3/4", thicker doors use longer cylinders - 1" throw bolt with 2 hardened steel pins Single Cylinder Deadbolt - Weiser - Schlage - Weiser. Double Cylinder Deadbolt - Schlage - Weiser.
OLD STYLE MORTISE LOCKS 199A 03 51 - “Crystal” glass knob with die cast bottom. - Includes spindle and set screws. - 2" Diameter, projects 2-1/4". 215 04 51 - Complete set includes 2 knobs, threaded spindle , 214 04 51 lock body, 2 of 213. - 04 51 escutheon, strike, screws and 2 keys. 216 03 51 - Fits square spindle. - Glass Knobs. - Brass Roses. - Escutcheon Plate. - Mortise Lock Body. - Mortise Lock Set. - 2-3/8” Spring Latch.
20 SERIES SOLID CYLINDER DEADBOLTS 20 - Full 1" throw deadbolt with hardened steel rod insert. - 5 pin tumbler solid brass cylinder. - Revolving cylinder collar resists any attempt at twist-off. - Solid brass one piece cylinder housing. - Door thickness adjustable for door 1-3/8" to 1-3/4". - UL adjustable bolt 2-3/8" or 2-3/4" backset. 20MB3W ADJ DI KA4 - Drive-in whereas all others have standard bolts. 22 3 Spin to Lock - Spin to lock function by spinning outside cylinder collar. - Outside locking by key. - Blocker button inside prevents access by key from outside when button is engaged. Single Cylinder (20) KW1 - SC1 - WR3. Double Cylinder (20MB3W ADJ DI KA4) WR3 - SC1. Spin to Lock (22 3) WR3. Thumbturn Bolt (26 32D)
20R SERIES REMOVABLE CYLINDER DEADBOLT - Full 1" throw bolt with hardened steel rod insert. - Revolving cylinder collar resists any attempt at twist-off. - Door thickness adjustable for door 1-3/8" to 1-3/4". - UL adjustable bolt 2-3/8" or 2-3/4" backset. - Removable solid brass 6 pin cylinder (pinned 5) standard. - Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands. - For a wide variety of keyways other than the stocked SC1 or WR3 keyway, please see our LSDA C500 & Ilco 15995 Universal Cylinders. Single Cylinder with Fixed Faceplate Bolt SC1 - WR3. Single Cylinder with Drive-In Bolt SC1 - WR3. Double Cylinder with Fixed Faceplate Bolt WR3 - SC1.
GRADE 3 BOLTS, THICK DOOR PACKAGES, STRIKES & CYLINDER CAP REMOVAL TOOL Adjustable 2-3/8” or 2-3/4” Bolt Drive-In - Standard 2-1/4” Thick Door Package 20 & 20R - 25 & 25R 2-3/4” x 1-1/8” Strike All Cylinder Cap Removal Tool 2-In-1 (12 Teeth & 14 Teeth) Cap Tool 20 & 25
40 SERIES ENTRANCE GRIPSETS - ANSI/BHMA: A156.2, series 4000 Grade 3 compliant. - Door thickness: 1-3/8” to 1-3/4”. - 1” throw bolt with hardened steel anti-saw rod. - Backset: Adjustable 2-3/8” or 2-3/4”. - Strikes: 2-1/4” full lip. - Handing: Non-handed. - Cylinder: Supplied with KW1, SC1 or WR5 rekeyable 5 pin cylinder, Optional SC1 cylinder available. - Revolving cylinder collar. - Reinforced with hardened anti-saw rod. - Door preparation: 2-1/8” diameter bore x 1” crossbore. - Key locking outside, turnbutton locking inside. 40 Series - Centre to centre: Early American & Park Avenue: 8-5/8”. 41 Series - Dummy for inactive leaf of double doors. 46 Series: Jumbo Gripset - Centre to centre: 9-11/16”. - 2-1/8” bore required for deadbolt. Optional Interior Levers for 40 Series - Handing: LH or RH. 40 Series Gripset Early American - Park Avenue - Early American. 46 Series Jumbo Gripset Metropolitan - Plantation.
OPTIONAL SC1 KEYWAY CYLINDERS FOR 40 & 46 SERIES Optional SC1 Keyway Cylinder Venetian Bronze SC1 - Satin Nickel SC1 - Millennium Brass SC1
OPTIONAL INTERIOR LEVERS FOR 40 & 46 SERIES Optional Interior Lever Trims Venetian Bronze Left/Right - Satin Nickel Left/Right - Millennium Brass Left/Right.
EL730 SERIES KEYPAD DEADBOLTS WITH OPTIONAL REMOTE CONTROL - UL listed for 2hr fire doors. - Weather resistant. - Electronic deadbolts with mechanical key override. - Optional auto-locking/relocking adjustable 10 to 90 seconds. - Optional single use codes. - Optional dual-authorization mode. - Digital keypad with up to 10 different codes possible. - Temporary lock-out all user codes. - Optional “keypad mute” mode for quiet environment. - Non-handed. - Automatically detects and sets bolt direction. - 1” deadbolt projection. - Adjustable 2-3/8” or 2-3/4” backset. - Door thickness: 1-3/8” to 2”. - Door preparation: 1-1/2” or 2-1/8” diameter bore x 1” crossbore. - Comes with SC1 keyway, drilled for 6, pinned to 5. - Uses 4 “AA” batteries (not supplied). - 5,000 operational battery life. - Can be programmed to work with up to 10 radio frequency remote controls. - Key-ring remotes do not require line of site and maintain security with 8 million. - unique codes without accidental overlap. EL730SLR: Remote Control Optional -Replacement of EL710S & EL730S. -Optional remote control sold separately.
OPTIONAL EL730 SERIES RADIO FREQUENCY REMOTE CONTROL - Each lock supports up to 10 remote controls - It is easy to add or delete remote controls by entering the correct programming sequence into the keypad. - In case of loss of remote control, you can delete all remote controls and reprogram the remote controls that were not lost or new additions. - No need to delete all remote control when disabling one remote control - All EL 730 optional remote controls use the same frequency, however, each remote control has a unique digital code that only those that are specifically programmed into each lock can open the lock. - When “Masterkey System” is required, one remote control can be enrolled into every lock making it a “master” remote control, then each lock can be programmed to have one to nine additional remote controls. - Alternative to this “Masterkey System” is to key all the mechanical cylinders the same and use a mechanical “master” key where it’s needed. - 8 million unique transmitter codes without accidental overlap - Radio Frequency Remote Control