Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Sargent Products

Sargent products mortise cylinders, lever handles, door knobs, rim cylinders, heavy duty knobs, and lever handles.
Back To Main Catagories

Sargent

10 Line Heavy Duty Levers & 8 Line Heavy Duty Knobs

Sargent 10 Line Heavy Duty Levers, 8 Line Heavy Duty Knobs.

10 LINE HEAVY DUTY LEVERS
- Cycle test: Exceeds 5 times A156.2 Grade 1 requirements.
- Abusive locked lever torque without entry gained: exceeds 1.5 times A156.2 Grade 1.
- For doors 1-3/4” to 2”.
- Non-handed.
- Cylindrical housing steel, zinc dichromate finish.
- Levers: Solid cast.
- Roses: Heavy wrought brass, bronze.
- Multiple thru-bolt positions.
- Latchbolt stainless steel 1/2” throw.
71 Electromechanical (Fail Secure)
- Power off, locks outside lever, inside lever always allows egress.
- Deadlocking latch; key retracts latch.
- Voltage requirements: 24VDC; 250mA at 24VDC.
- Provided with ElectroLynx® 8-Pin Connector.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Classroom:
- Latch by either lever unless outside lever is locked by key. Key in outside lever locks or unlocks outside lever and retracts latch. Inside lever always operative.
Passage:
- Latchbolt by either lever.
Function - Finish - Keyway
- Storeroom - Satin Chrome -LA
- Entrance - Satin Chrome - LA
- Classroom - Satin Chrome - LA
- Storeroom - Satin Chrome - LA
- Passage - Satin Chrome —
- Privacy - Satin Chrome -

8 LINE HEAVY DUTY KNOBS
- Heavy duty T-Zone construction with interlocking latch and aligning tubes.
- ANSI A156.2 series 4000 Grade 1.
- 1-3/8” thick door adjustable to 1-3/4”.
- Accurate alignment, smooth operation and reversibility of the lock without disassembly of knob and cylinder.
- Latch: Seamless brass tube with stainless steel springs for longer life.
- ANSI A-115.2 strike – 1-1/4” lip standard.
Entrance:
- Key outside or knob inside always retracts latchbolt, buttom inside can be pushed-in & turned only; locks outside knob until released manually.
Function - Finish - Keying
- Entrance - Satin Chrome - LA


Sargent

7 Line Medium Duty Levers & 6500 Line Medium Duty Levers

Sargent Products 7 Line and 6500 Line Medium Duty Levers.

7 LINE MEDIUM DUTY LEVERS
- Exceeds 2-1/2 times ANSI/BHMA A156.2 Grade 2 cycle requirements.
- Non-handed.
- Solid feel and precise lever action.
- For doors 1-3/8” to 1-3/4”.
- Cylindrical housing steel, zinc dichromate finish.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Function - Finish - Keying
- Storeroom - Satin Chrome - LA
- Storeroom - Satin Chrome - LA
- Entrance - Satin Chrome - LA
- Entrance - Satin Chrome - LA
- Classroom - Satin Chrome - LA
- Classroom - Satin Chrome - LA
- Passage - Satin Chrome —
- Passage - Satin Chrome —
- Privacy - Satin Chrome —
- Privacy - Satin Chrome —

6500 LINE MEDIUM DUTY LEVERS
- Meets ANSI/BHMA A156.2 Grade 2 cycle requirements.
- Non-handed.
- For doors 1-3/8” to 1-3/4”.
- Cylindrical housing steel, zinc dichromate finish.
- Wrought rose, cast lever.
Storeroom:
- Latchbolt by lever inside or key outside. Outside lever rigid at all times.
Entrance:
- Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever. Turn button must be released manually. Key only retracts latchbolt when outside lever is locked by push button.
Passage:
- Latchbolt by either lever.
Privacy:
- Latch retracted by either lever unless outside lever is locked by push button in inside lever.
Function - Finish - Keying
- Storeroom - Satin Chrome - LA
- Entrance - Satin Chrome - LA
- Passage - Satin Chrome - LA
- Privacy - Satin Chrome - LA


Sargent

6 Line Knobs, 8200 Series Mortise Levers & Accessories

Sargent Products 6 Line Knobs, 8200 Series Mortise Levers and Accessories.

6 LINE MEDIUM DUTY KNOBS
- Fits doors from 1-3/8” to 1-3/4” thick.
- Certified ANSI A156.2 series 4000 Grade 2.
- OB knob design.
- Knob & rose: Wrought brass/bronze.
Function - Finish - Keying
- Storeroom - Satin Chrome - LA
- Entrance - Satin Chrome - LA
Latch
Backset - Finish
- 2-3/4” - Stainless Steel

8200 SERIES MORTISE LEVERS
- For doors 1-3⁄4” thick.
- 2-3/4” backset.
- Case 12 gauge heavy duty wrought steel, zinc dichromate plated.
- Case thickness: 7/64”, 12 gauge heavy duty wrought steel, zinc dichromate plated.
- Outside front plate: 8” x 1-1⁄4”.
- Latchbolt: Stainless steel 3⁄4” projection one-piece, anti-friction reversible latch.
- Hand: Easily field reversible.
- Certified to and exceeds ANSI A156.13, series 1000, operational Grade 1 and security Grade 1 with all standard trims.
BP8205:
- Body only.
8271 24VDC:
- Solenoid activated mortise lock.
- Power to the solenoid, locks outside lever.
- Key outside retracts latchbolt except when lever outside is locked. Lever outside can only be locked with the solenoid. Lever inside always retracts latchbolt.
- Auxiliary deadlatch.
- 24VDC.
LCRX8271 24VDC:
- Request to enter/exit signaling switch - monitors inside lever rotation.
Function - Cylinder - Design - Hand
- Storeroom - Standard - LNL - Left
- Entrance - Less Cylinder - LNL - Right
- Passage — - LNL - Right
- Classroom - Less Cylinder - LNJ - Left
- Privacy — - LNL - Right
- Entrance - Less Cylinder — —
Electromechanical, Fail Secure Lock, 24VDC
- Storeroom - Less Cylinder - LNL - Right
- Storeroom - Less Cylinder - LNL - Right
Spindle Kit
Description - Series
- 1-3/4” Spindle - Old 8100
- 1-3/4” Spindle New - 8100


Sargent

4870 Mortise Deadbolts & 460, 480 Series Cylindrical Deadbolts

Sargent Products Mortise And Cylindrical Deadbolts, 460 Series, 480 Series Cylindrical Deadbolts.

4870 MORTISE DEADBOLTS
- Bolt: One piece hardened stainless steel deadbolt with 1” throw.
- Door thickness: 1-3/4”.
- Front: 4-5/8” x 1-1/8”.
- Non-handed.
Single Deadbolt:
- Key outside operates deadbolt. Thumb turn inside operates deadbolt.
Classroom Function:
- Key outside operates deadbolt. Thumb turn inside retracts deadbolt, but will not project it.
Description - Finish - Keying
- Single Deadbolt - Satin Chrome - LA
- Classroom - Satin Chrome - LA

460 & 480 SERIES CYLINDRICAL DEADBOLTS
- For doors 1-3/8” to 1-3/4” thick only.
- Backset: 2-3/4”.
Single Deadbolt
- Key outside operates deadbolt. Thumb turn inside operates deadbolt.
460 Series
- Bolt: solid brass 5/8” x 13/16” x 1” throw with hardened steel pin.
- Cylinder housing: Steel reinforced and plated.
480 Series
- Bolt: solid steel with hardened steel pin insert and nickel silver plating 7/8” x 5/8” x 1” throw.
- Cylinder housing: Non-ferrous, reinforced, one piece 2-1/2”
16 2153 32D
- Bolt for 480 series
Finish - Keyway
- Stainless Steel LA
- Satin Chrome LA
Bolt
Backset - Finish
- 2-3/8” Stainless Steel


Sargent

4870 Mortise Deadbolts & 460, 480 Series Cylindrical Deadbolts

Sargent Products Keypad Locksets, 90 Series Exit Device and Trim.

KEYPAD LOCKSETS
- Keypad made of ultraviolet stable textured material.
- Operating temperature for keypad: 4°F to 140°F.
- Adjustable unlock time.
- Over 1,100,000 possible user combinations.
- 100 user codes.
- Operates utilizing any one to six digits per code - digits may be repeated or start with “0”.
- “One time” user codes allow visitors “one time” entry.
- Entry of three wrong user codes in succession disables all codes for ten seconds.
- Unit can be put in “passage only” mode at keypad.
- One master code - assigns emergency, supervisory and user codes.
- Meets ANSI A156.2 Grade 1 requirements.
- Operates with 4 “C” alkaline batteries (included).
- Key override on both models.
- External battery input connector on under side of keypad in case of battery failure.
- Typical 40,000 operations per set of batteries.
- For 1-3/4” thick doors.
- Infrared link to optional printer (52-2069) shows last fifteen transactions.
Type
- Cylindrical Latch
- Mortise Latch

90 SERIES RIM EXIT DEVICES & TRIM
- Maximum 4-1/2 inch (114mm) projection, minimum 2-3/4 inch (70mm) dogged.
- Stainless steel springs throughout.
- ANSI A156.3 Grade 1.
- UL Listed.
- UL Listed to Canadian safety standards.
- Double doors require astragal.
- For doors: Wood or metal; 1-3/4” thick standard, 4-1/8” minimum stile.
- Mounting: Supplied standard with wood and machine screws.
- Chassis cover: Brass, bronze or stainless steel.
- Chassis: Nonferrous alloy.
- Crossbar: 1” brass, bronze and stainless steel tubing.
- Cross bars can easily be cut to length in the field.
- Trim is through-bolted.
- Hand: Non-handed.
- Dogging: Standard Allen key dogging.
- Strike: 649 standard.
98 T PTB
- Pull is through bolted to the exit device through the chassis which allows for perfect alignment of the thumb piece and cylinder.
- Key outside unlocks/ locks thumb piece.
- Rim cylinder supplied.
Description - Finish
- Reversible Rim Exit Device - Stainless Steel
- Trim - Sain Chrome


Sargent

3828 Series Rim Exit Devices & 3828 Series Trims

Sargent Products 3828 Series Rim Exit Devices and 3828 Series Trims.

3828 SERIES RIM EXIT DEVICES & TRIM
- Rugged exit device in a rim design.
- Chassis mounted unit construction assures easy installation and maintenance.
- ANSI/BHMA Standard 156.3 Grade 1.
- UL listed.
- UL listed to Canadian safety standards.
- For doors: 1-3/4” thick standard, 4-1/2” minimum stile width required for single or double door applications using standard 649 strike.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Mounting: Furnished standard with wood and machine screws; Available with through bolts and mortise nuts.
- Tapered push rail and angled covers.
- Steel endcaps and covers.
- Chassis: Nonferrous alloy.
- Rail assembly: Roll formed steel.
- Finish: Sprayed aluminum enamel or polyester powder coated.
- Hand: Non-handed.
- Latchbolt: Stainless steel 3/4” throw.
- Strike: 649 packed standard.
- Dogging Feature: Allen-type key furnished standard (non fire rated devices only).
TYPE
- Rim Exit Device
- Fire Rated Rim Exit Device

3828 SERIES TRIMS
- For doors: 1-3/4” only.
28CLL
- UL listed to Canadian safety standards.
- Non-handed.
- Classroom function: Key in lever locks or unlocks lever.
28LLL
- UL listed to Canadian safety standards.
- Non-handed.
- Passage function: Latch bolt operated by lever, no cylinder.
28C OB
- Entrance function: Key in knob locks or unlocks knob.
28C TP
- Classroom function: Key locks or unlocks thumbpiece.
- 28 K HTB.
- UL listed to Canadian safety standards.
- Through-bolted with 3 mortise nuts.
- Pulls project 1-1/2” from door face.
- Night latch: Outside by pull and key.
Type - Function - Finish
- Lever - Classroom - Satin Chrome
- Lever - Passage - Satin Chrome
- Knob - Entrance - Satin Chrome
- Pull - Night Latch - Aluminum
- Thumbpiece - Classroom - Aluminum


Sargent

8710 Series Surface Vertical Rod Exit Device & 8888 Series
Reversible Rim Exit Devices

Sargent Products 8710 Series Surface Vertical Rod Exit Device and 8888 Series Reversible Rim Exit Devices.

8700 SERIES SURFACE VERTICAL ROD EXIT DEVICE
- Two point latching: Top & bottom latchbolt projection adjustable through centre case.
- Standard bottom latch compatible with latch track thresholds (by others).
- Single and double door applications.
- Handing: Right hand reverse bevel.
- ANSI A156.3 - 2001 Grade 1; tested to over 16 million cycles.
- Rods are 1/2” brass, bronze or stainless steel.
- Door types: Wood or metal 1-3/4” thick door, 4-1/2” minimum stile with trim and 3-1/2” minimum stile without trim.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Strikes: 646 top strike (panic and fire-rated), 624 bottom strike; 655 fire rated bottom strike.
- Dogging feature: Hex key dogging standard.
- Mounting fasteners: Supplied standard with wood and machine screws.
- Top and bottom bolt: Brass, stainless steel.
- Device centreline from finished floor: 41” (1041 mm) for standard applications: 38” (965mm) for elementary schools and to meet local accessibility standards when a 300 series auxiliary control is used.
- Centre case dimensions: 8-3/8” x 2-5/8”.
- Projection: Pushbar neutral – 3”; Pushbar depressed – 2-1/8”.
- Door opening/height: must be specified (102” max door opening).
- Stainless steel finish.
Description
- 36” Vertical Rod Exit Device

8888 SERIES REVERSIBLE RIM EXIT DEVICES
- The perfect stocking device designed for standard width stile applications on wood and metal doors.
- Non-handed.
- Single and double door applications.
- ANSI A156.3 - 2008 Grade 1.
- UL Fire and Panic Listed.
- Door types: Wood or metal 1-3/4” and 2-1/4” thick door.
- For doors: F Rail - 33” to 36”.
- No cutting required for 36” door.
- Mounting is supplied standard with wood and machine screws. Available on order with through bolts and mortise nuts.
- Chassis cover: cold drawn stainless steel, bronze or bronze.
- Stainless steel latchbolt, 3/4” throw.
- 649 strike standard (panic & fire rated).
- Stainless steel finish.
8888F:
- Chassis - Nonferrous alloy (Panic).
- Hex key dogging standard on non fired rated devices.
12-8888F:
- Chassis - Ferrous alloy (Fire Rated).
Description
- Standard Rim Exit Device
- Fire Rated Rim Exit Device


Sargent

80 SERIES TRIMS & LATCH RETRACTION KIT

Sargent Product 80 Series Trims, Latch Retraction Kit and Exit Device Parts.

80 SERIES TRIMS & LATCH RETRACTION KIT
R56A F32D
- Retrofit standard mechanical F Rail - 33” to 36” size: 11-1/4”.
- Contains ribbon wiring.
700 Series ET Trims:
- ET lever trims can be used for all 80 series exit devices.
- Escutcheons are forged or cast brass and the levers are brass or bronze.
- Satin chrome finish.
704ETL26D LA
- Night Latch: Key retracts latch.
- #34 rim cylinder supplied, LA keyway.
710ETL26D RHR
- No outside operation, no cylinder.
- ET Control is used as pull only.
713 8 ETL 26D LA
- Key outside locks /unlocks trim.
- #41 mortise cylinder supplied, LA keyway.
715 8ETL26D RHR
- Passage only, no cylinder.
Description
- Electric Latch Retract Push Kit
- Night Latch Trim, LA Keyway
- No Outside Operation, Pull Only Trim
- Key Outside Unlocks/Locks Trim, LA Keyway
- Passage Only Trim

EXIT DEVICE PARTS
- 816 1 32D LA
- F wide rail 33” to 36” insert.
- For 80 series exit devices.
- LA Keyway.
- Satin stainless steel finish.
Description - Series
- End Cap Screw - 98
- Dogging Kit - 20 & 80
- Dogging Key - 98
- End Cap - 98
- Arm Spring - 98
- Hub Spring - 700 ET Trim
- Hub Spring J Lever Only - 700 ET Trim
- Latch Spring - 9800
- Latch Spring - 9898
- Cylinder Dogging Kit - 80


Sargent

Removable Mullions, 351 & 1431 Series Door Closers

Sargent Products Removable Mullions 351 Series and 1431 Series Door Closers.

REMOVABLE MULLION
- For double door applications without existing mullion.
- T-shaped: 2-1/2” x 3”.
- Stock size: 96” long, maximum length 102”.
- Weight: 18 lbs.
- Finish: Aluminum prime coat.
- Includes top retainer - 511 & bottom retainer - 502.
- Non-handed.
Type
- Removable Aluminium Mullion

351 & 1431 SERIES DOOR CLOSERS
- ANSI/BHMA A156.4 Grade 1.
- Conforms to UL10C and UBC for positive pressure fire test.
- cUL listed to Canadian safety standards listed for use on fire doors.
- For interior and exterior applications.
- High impact non-corrosive plastic covers standard.
- Adjustable from size 1 to 6.
- Complies with handicap regulations for reduced open force.
- Non-handed.
- Meets ADA requirements.
- All weather capabilities.
- Universal arm package provides brackets and arms to install closer in standard top jamb or parallel applications.
- MicroShield® technology: A silver-based antimicrobial coating designed to inhibit the growth of bacteria.
351
- Case size: 13”W x 3-7/8”H.
- Maximum reveal: 7/16”.
- Powerglide® line of surface door closers has been engineered to meet the demands of architects and building owners.
- Ideally suited for exterior doors in heavy draft and wind conditions.
- Rack & pinion for better control.
- Heavy duty one piece die cast aluminum silicon alloy body with 14% silicon provides superior strength and wear resistance.
1431
- Case size: 12”W x 3-3/8”H.
- General purpose quality grade closer.
- Retrofits discontinued 1230/ 1231 models.
- Constructed from a carefully selected aluminum silicon alloy to accommodate the door closer characteristics increasing the body strength and wear resistance.
- Key control valves offer separate regulating for door speed, latching & backcheck.
Finish
- Sprayed Aluminum
- Sprayed Aluminum


Sargent

6 Line Key-In Knob Cylinder, 10 Line Key-In Knob Cylinder,
6300 large Format Interchangeable Removable Core Cylinder
and 34 Series Rim Cylinder

Sargent Products 6 Line Key-In Knob Cylinder, 10 Line Key-In Knob Cylinder, 6300 large Format Interchangeable Removable Core Cylinder and 34 Series Rim Cylinder.

6 LINE KEY-IN-KNOB CYLINDER
- For use with Sargent 6 line series knob locks.
- 6 pin standard.
- Supplied with 2 nickel silver keys.
- Satin nickel finish.
Keyway
- LA

10 LINE KEY-IN-KNOB CYLINDER
- For use with Sargent 10 line series, 7 line series & 6500 series.
- 6 pin standard.
- Supplied with 2 nickel silver keys.
- Satin nickel finish.
Keyway
- LA

6300 LARGE FORMAT INTERCHANGEABLE REMOVABLE CORE CYLINDER
- Unassembled core for field rekeying.
- Includes control sleeve and two key blanks.
- Springs and pins to be ordered separately.
- Uncombinated cores.
Keyway
- LA

34 SERIES RIM CYLINDER
- 27/32” screw pattern for through-bolted exit devices.
- Furnished with rosette and compression spring, and “break-off” screws and back plate.
- 6 pin.
- Horizontal tail piece.
Keyway
- LA


Sargent

40 Series Mortise Cylinder & 40 Series Mortise Cam-Key Blanks

Sargent Products 40 Series Mortise Cylinder and 40 Series Mortise Cam-Key Blanks.

40 SERIES MORTISE CYLINDER
- Furnished with rosette and compression spring.
- Supplied with Sargent standard offset cam.
- 6 pin standard.
- Solid brass cylinder.
- 1-1/8” length.
Keyway
- LA
- LB
- LC
- LE
- RA
- RB
- RC

40 SERIES MORTISE CAM
Type
- Adams Rite 4070, 4150, 4250, 4350 & 4516

KEY BLANKS
- Nickle silver key blanks.
- Keyway
- 5 Pin LA
- 6 Pin LA
- 6 Pin LB
- 6 Pin LC
- 6 Pin LD
- 6 Pin LL
- 6 Pin LN
- 6 Pin RA
- 6 Pin RB
- 6 Pin RC
- 6 Pin RF
- 6 Pin RL