Lock Surgeon   Jobber   Supply

A Division of Lock Surgeon ™

Shipped Direct to You   or   In-Store Pick Up

Edmonton:
780-448-9243 Ext:4

Calgary:
403-770-5625 Ext:3

Toll Free:
1-844-448-9243 Ext:4

Schlage Products

Schlage products heavy duty levers, heavy duty knobs, grade 2 levers, grade 2 knobs, latches and extensions.
Back To Main Catagories

Schlage

ND Series Heavy Duty Levers

Schlage Products ND Series Heavy Duty Levers.

ND SERIES HEAVY DUTY LEVERS
- Meet handicap accessibility codes.
- All ND series lever locksets are non-handed.
- Independent heavy duty spring cages for effective lever support.
- Thru-bolted mechanism for positive interlock to door.
- Exceeds ANSI A156.2 series 4000 Grade 1.
- Free-wheeling lever eliminates the ability to stand or exert excessive force on the end of the lever to resist vandalism.
- Backset: 2-3/4”.
Passage Latch
- Both levers always unlocked.
Bath/Bedroom Privacy Lock
- Pushbutton locking. It can be opened from outside with a small screwdriver. Turn inside lever or close door to release button.
Entrance/Office Lock
- Pushbutton locking. Pushbutton locks outside lever until it is unlocked with key or by turning inside lever.
Entrance Lock
- Turn/pushbutton locking: Pushing and turning the button locks the outside lever requiring use of a key until the button is manually unlocked. Pushbutton locking: pushing button locks outside lever until unlocked by key or by turning the inside lever.
Classroom
- Outside lever locked and unlocked by key. Inside lever always unlocked.
Storeroom
- Outside lever is fized. Entrance by key only. Inside lever always unlocked.
Electrically Unlocked (Fail Secure)
- Outside lever continuously locked until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate exit.
Cylinder - Design
- — Athens
- — Rhodes
- — Sparta
Bath/Bedroom Privacy Lock
- — Athens
- — Rhodes
- — Sparta
Entrance/Office
- Less Cylinder Athens
- Less Cylinder Rhodes
- Less Cylinder Sparta
Entrance
- Less Cylinder Rhodes
- C Keyway Athens
- C Keyway Rhodes
- C Keyway Sparta
Classroom
- C Keyway Athens
- C Keyway Rhodes
- C Keyway Sparta
Storeroom
- Less Cylinder Rhodes
- Less Cylinder Sparta
- C Keyway Athens
- C Keyway Rhodes
- C Keyway Sparta
Electronically Unlocked Storeroom
- Less Cylinder Rhodes
- C Keyway Rhodes


Schlage

Extra Heavy Duty D Series Knobs, Latches & Extension

Schlage Products D Series Extra Heavy Duty Knobs, D Series Latches and Extension Links.

D SERIES EXTRA HEAVY DUTY KNOBS
- Heavy duty commercial and institutional applications.
- Concealed mounting screws.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Door thickness: 1-3/8" to 2".
- ANSI A156.2 Series 4000 Grade 1, UL listed.
- Backset: 2-3/4" standard.
- Latch: 1/2" throw steel latch bolt with 1" housing.
- All stock in satin chrome finish and orbit design.
Passage Latch
- Both knobs always unlocked.
Privacy
- Pushbutton locking. Can be opened from outside with small screwdriver. Turning inside knob or closing door releases button. Inside knob is always free for immediate egress.
Entrance
- Pushing button locks outside knob until unlocked by key or by turning inside knob. Pushing and turning button locks outside knob requiring use of key untill button is manually unlocked. Inside knob is always free for immediate egress.
Classroom
- Outside knob locked and unlocked by key. Inside knob is always free for immediate egress.
Storeroom
- Outside knob fixed. Entrance by key only. Inside knob is always free for immediate egress.
Electrically Unlocked (Fail Secure) Auxiliary latch deadlocks latchbolt when door is closed. Outside knob continuously locked until unlocked by key or electric current. Inside knob is always free for immediate egress.
Cylinder - Design
Passage
- — Orbit
Privacy
- — Orbit
Entrance
- C Keyway - Orbit
Classroom
- Less Cylinder - Orbit
- C Keyway - Orbit
Storeroom
- Less Cylinder - Orbit
- C Keyway - Orbit
Electrically Unlocked (Fail Secure)
- C Keyway - Orbit

D SERIES LATCHES & EXTENSION LINKS
43 005
- Extension link when used with a 2-3/4” latch creates a 5” backset latch.
Backset - Type
- 2-3/4” - Deadlatch
- 2-3/8” - Deadlatch
- 5” Extension


Schlage

Grade 2 AL Series Levers

Schlage Products Grade 2 AL Series Levers.

AL SERIES GRADE 2 LEVERS
- True thru-bolting of door prevents lock chassis rotation and disengagement from latch.
- Stainless steel interlocking spindle design.
- Cold rolled steel, machined, threaded hubs and locking nuts prevent loosening of the lockset.
- Heavy duty cast mounting plate with specially tapped holes reduces loosening of through-bolting and lockset on the door.
- Heavy duty compression springs extend life of spring cage.
- Large diameter of mounting plate and rose provides coverage for new ANSI hollow metal door cutout.
- Solid brass pin tumbler cylinder with nickel silver keys for less wear and longer cycle life.
- Door thickness: 1-3/8” to 1-7/8”.
- Backset: 2-3/4”.
- Keying: Stock in KD standard, 6 pin cylinder keyed to 5.
- Non-handed.
- ANSI A156.2, 1989, series 4000 G2.
- UL listed for all functions up to 3-hour doors.
- ADA compliant.
- All stock in satin chrome.
Passage
- Both levers always unlocked.
Exit
- Blank plate outside. Inside lever always unlocked. Inside lever always free for immediate egress.
Privacy
- Push button locking. Can be opened from outside with small screwdriver. Turning inside lever or closing door releases button.
Entrance/Office
- Push-button locking. Push-button locks outside lever until unlocked with key or by rotating inside lever.
Entrance
- Turn/push-button locking; pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turning inside lever.
Classroom
- Outside lever locked and unlocked by key. Inside lever always unlocked.
Storeroom
- Outside lever always fixed. Entrance by key only. Inside lever always free for exit.
Cylinder - Design
Passage
- — Jupiter
- — Neptune
- — Saturn
Exit
- C Keyway - Saturn
Privacy
- — Jupiter
- — Neptune
- — Saturn
Entrance/Office
- C Keyway - Jupiter
- C Keyway - Neptune
- C Keyway - Saturn
Entrance
- C Keyway - Jupiter
- C Keyway - Neptune
- C Keyway - Saturn
Classroom
- C Keyway - Jupiter
- C Keyway - Neptune
- C Keyway - Saturn
Storeroom
- C Keyway - Jupiter
- C Keyway - Neptune
- C Keyway - Saturn


Schlage

Grade 2 A Series Knobs, Latches & Extension Links

Schlage Products Grade 2 A Series Knobs, Latches and Extension Links.

A SERIES GRADE 2 KNOBS
- Heavy duty residential medium duty commercial.
- ANSI A156.2 series 4000 Grade 2, UL listed.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Door thickness: 1-3/8” to 1-7/8” standard.
- Backset: 2-3/4”, 2-3/8” available.
- Latch: 1/2” throw deadlatch: 3/8” throw springlatch.
- Strike: T-strike 1-1/8˝ x 2-3/4˝.
- All stock in satin chrome.
Passage
- Both knobs always unlocked.
Privacy
- Push button locking. Can be opened from outside with small screwdriver.
- Turning inside knob or closing door releases button.
Entrance
- Turn/pushbutton locking; pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Pushbutton locking; pushing button locks outside knob until unlocked by key or by turning inside knob.
Classroom
- Outside knob locked and unlocked by key. Inside knob always unlocked.
Storeroom
- Outside knob always fixed. Entrance by key only. Inside knob always free for exit.
Style - Function - Cylinder
- Orbit - Passage —
- Orbit - Privacy —
- Orbit - Entrance - Less Cylinder
- Orbit - Entrance - C Keyway
- Orbit - Classroom - C Keyway
- Orbit - Storeroom - Less Cylinder
- Orbit - Storeroom - C Keyway

A SERIES LATCHES & EXTENSION LINK
41 005
- Extension link when used with a 2-3/8” latch (not included) creates a 5” backset latch.
FINISH - BACKSET - DIAMETER
Deadlatch
- 626 - 2-3/8” - 7/8”
- 626 - 2-3/4” - 1”
- 626 - 3-3/4” - 1”
Extension
- Zinc - 5” —


Schlage

Grade 1 L Series Mortise Locksets

Schlage Products Grade 1 L Series Mortise Locks.

L SERIES MORTISE LOCKSETS
- ANSI A156.13 series 1000, Grade 1.
- UL listed for 3 hr fire door.
- Handing: L9000 series lock bodies are field-reversible without disassembly.
- Door thickness: 1-3/4”.
- Backset: 2-3/4”.
- Armored front: 1-1/4” x 8” x 7/32”.
- Spacing: Knob or lever to cylinder, 3-7/8”, knob or lever to thumbturn hub, 2-11/16”.
- Case size: 4-7/16” x 6-1/16” x 1”.
- Bolts: 1” throw stainless steel deadbolt and 3/4” throw stainless steel latch with anti-friction tongue.
- Knob trim: Knobs are heavy-duty wrought brass, bronze or stainless steel.
- Lever trim: Forged brass or bronze and cast stainless steel.
- Stocked less cylinder.
- All trims are supplied with the B wrought rose which is 2-9/16” in diameter.
L9080L EU
- Lock may be unlocked electronically by 24VDC @ 150mA current.
- Fail secure.
Passage Latch
- Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress.
Office and Inner Entry
- Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Classroom
- Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Storeroom
- Latchbolt retracted by key outside r by knob/lever inside. Outside knob. lever always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Entrance
- Latchbolt retracted by knob/lever from either side unless o tuside is locked by 20° rotation of thumbturn. Deadbolt thrown or retracted by 90° rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/lever remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Corridor
- Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside lever is always free for immediate egress.
Storeroom lock with deadbolt
- Latchbolt retracted by key outside or by lever or knob inside. Outside knob lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Design - Finish
Passage Latch
- 06 - Satin Chrome
Office and Inner Entry Lock
- 06 - Satin Chrome
Classroom
- 03 - Satin Chrome
Storeroom Lock
- 3 - Satin Chrome
- 42 - Satin Chrome
- 06 - Satin Chrome
Electrified Storeroom
- 06 - Satin Chrome
Entrance
- 03 - Satin Chrome
- 42 - Satin Chrome
- 06 - Satin Chrome
Corridor Lock
- 06 - Satin Chrome
- 17 - Satin Chrome
Storeroom Lock With Deadbolt
- 17 - Satin Chrome


Schlage

B250 & B500 Series Deadbolts

Schlage Products B250 Series Single Cylinder Deadlatches and B500 Series Single-Double Deadbolts.

B250 SERIES SINGLE CYLINDER DEADLATCHES
- Fits doors 1-3/8" to 1-3/4" thick.
- Deadlocking latch bolt prevents “shimming” of the latch.
- “Holdback” feature retains the deadlatch in a retracted position when desired.
- Stocked 2 3/4” backset with “C” keyway.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- ANSI A156.5 Grade 1.
Keyway - Finish
Single Cylinder
- C Keyway - Polished Brass
- C Keyway - Satin Chrome
Double Cylinder
- C Keyway - Satin Chrome

B500 SERIES SINGLE & DOUBLE DEADBOLTS
- Adapter rings: Trim ring with anti-pry shield standard, 2-1/2” outer diameter.
- Removable to fit 1-1/2” door preps.
- Exposed trim: wrought brass or bronze, reinforced with steel security insert.
- Deadbolt: 1” x 2-1/4”, square corner faceplate, 1” housing diameter, 1” throw.
- Strike: 1-1/8” x 2-3/4”, square corner, box.
- Backset: Adjustable for 2-3/8” or 2 3/4”.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Door thickness: 1-3/8” - 1-3/4”.
- Reinforcement: Metal dust box reinforcer with three 3” screws.
- Certification: ANSI A156.5, 2001, Grade 2.
B571 626
- Door bolt occupancy indicator used on washrooms.
Keyway - Finish
Single Cylinder
- C Keyway - Polished Brass
- E Keyway - Polished Brass
- C Keyway - Antique Brass
- C Keyway - Satin Bronze
- C Keyway - Antique Bronze
- C Keyway - Satin Chrome
- E Keyway - Satin Chrome
Fire Rated Single Cylinder
- C Keyway - Polished Brass
- C Keyway - Satin Chrome
Double Cylinder
- C Keyway - Polished Brass
- C Keyway - Satin Chrome
Single Cylinder Door Bolt with Indicator Bolt
- — Satin Chrome
- Emergency Key
Thumbturn Deadbolt
- — Satin Chrome
Single Cylinder Door Bolt without Indicator
- — Satin Chrome


Schlage

B660 Series Deadbolts, B Series Bolts & Tailpieces

Schlage Products B660 Series Grade 1 Commercial Deadbolts and B Series Thimble Strike-Bolts-Tailpieces.

B660 SERIES GRADE 1 COMMERCIAL DEADBOLTS
- 1” throw high-strength steel alloy deadbolt with hardened steel roller resists sawing and kick-in attacks.
- Wood frame reinforcer protects wood jamb against kick-in attacks.
- Reinforcer is concealed under strike and is anchored to jamb by two 3” screws.
- Free-spinning solid cylinder collar resists wrenching and prying.
- Large inside thumbturn makes it easy to throw and retract deadbolt.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Metal shield protects bolt from ice-pick attack through door.
- Hardened steel balls protect mounting bolts from drill attack.
- Backset: 2-3/4”. Classroom
- Deadbolt thrown only by key outside; retracted by key outside or thumbturn inside.
Keyway - Finish
Single Cylinder
- C Keyway - Polished Brass
- C Keyway - Satin Chrome
Double Cylinder
- C Keyway - Polished Brass
- C Keyway - Satin Chrome
Single Cylinder: Classroom
- C Keyway - Satin Chrome

B SERIES THIMBLE STRIKE, BOLTS & TAILPIECES
Thimble Strike
- Description - Diameter - Finish
- Circular Drive-In, Thimble Strike Plate - 1-3/8” - Zinc
Deadlatches For B250 Series
Backset - Face - Diameter - Finish
- 2-3/8” - -1-1/8” x 2-1/4” - 1” - Polished Brass
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Satin Chrome
- 2-3/4” - 1-1/8” x 2-1/4” - 1” - Satin Chrome
Bolts Bolt For B500 Series
- Adjustable - 1-1/8” x 2-1/4” - 1” - Polished Brass
- Adjustable - 1-1/8” x 2-1/4” - 1” - Satin Stainless
Bolts & Drive-in For B600, 700, 800 Series
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Polished Brass
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Satin Chrome
- 2-3/4” - 1-1/8” x 2-1/4” - 1” - Satin Chrome
- 5” - 1-1/8” x 2-1/4” - 1” - Satin Chrome

Tailpieces
Description - For
- 1-5/8”, 1-3/4”, 3” Standard Tailpiece - B252, B462 012161
- 2”-2-1/2” Tailpiece - 662


Schlage

Mortise Cylinder Cams & Brass Key Blanks

Schlage Products Mortise Cylinder Cams and Brass Key Blanks.

MORTISE CYLINDER CAMS
For:
Classic & Conventional
- Adams Rite MS 4500 & 4700
- Yale 2160, Arrow #004, Sargent 13-0660
- L400, 9000 Series
Everest & Primus
- Adams Rite MS, 4500 & 4700
- Standard, L9060 Only
- L400, 9000 Series
Modular Cylinder Cams
- Corbin Russwin DL4000 1-1/8”, 1-3/8” & 1-5/8”
- Corbin Russwin ML2200 1-1/8”, 1-3/8” & 1-5/8”
- Adam’s Rite Kit for 1-1/8”, 1-3/8” & 1-5/8”
- L Series for Cylinder 1-1/8”, 1-3/8” & 1-5/8”
- L Series for Cylinder 1-1/4”, 1-1/2” & 1-3/4”
- L9060 Straight Cam for 1-1/8”, 1-3/8” & 1-5/8”

KEY BLANKS
Everest 29 Primus XP
- 6 Pin S123, Level 8
- 6 Pin S123
- 6 Pin S145, Master Key
Everest
- 6 Pin C123
- 6 Pin C145, Master Key
Classic
- 5 Pin C
- 5 Pin E
- 6 Pin C
- 6 Pin CE
- 6 Pin E
- 6 Pin EF
- 6 Pin F
- 6 Pin G
- 6 Pin T
Control Key Blanks
- C
- E